PV Board Relay

www.DataSheet4U.com Catalog 1308242 Issued 3-03 (PDF Rev.11-04) OEG OJ/OJE series 3-10 Amp Miniature, PC Board Relay Appliances, HVAC, Industrial Control. UL File No. E82292 CSA File No. LR48471 VDE File No. 10080 TUV File No. R75081 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features • • • • • • Miniature size 18.2 x 10.2 x 14.7h. 1 Form A (SPST-NO) contact arrangement. Designed to meet UL, CSA, VDE, TUV requirements. Designed to meet 4kV dielectric between coil and contacts (OJ). Sensitive and standard coils available. Immersion cleanable, sealed version available. Coil Data @ 20°C OJ/OJE-L Sensitive Rated Coil Voltage (VDC) 5 6 9 12 24 Nominal Current (mA) 40.0 33.3 22.5 16.7 8.6 Coil Resistance (ohms) ± 10% 125 180 400 720 2,800 Must Operate Voltage (VDC) 3.75 4.50 6.75 9.00 18.00 Must Release Voltage (VDC) 0.25 0.30 0.45 0.60 1.20 Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO). Material: Ag, Ag Alloy. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @5VDC. Initial Contact Resistance: 100 milliohms @ 1A,6VDC. OJ/OJE-D and -H Standard Rated Coil Voltage (VDC) 5 6 9 12 24 48 Nominal Current (mA) 91.0 75.0 50.0 37.5 18.8 9.4 Coil Resistance (ohms) ± 10% 55 80 180 320 1,280 5,100 Must Operate Voltage (VDC) 3.50 4.20 6.30 8.40 16.80 33.60 Must Release Voltage (VDC) 0.25 0.30 0.45 0.60 1.20 2.40 Contact Ratings 3A @ 250VAC resistive, 3A @ 28VDC resistive. OJ/OJE-LMH: 8A @ 250VAC resistive, 8A @ 28VDC resistive. OJ/OJE-DM: 5A @ 250VAC resistive, 5A @ 28VDC resistive. OJ/OJE-HM: 10A @ 250VAC resistive, 10A @ 28VDC resistive. Max. Switched Voltage: AC: 265V. DC: 30V. Max. Switched Power: OJ/OJE-LM: 720VA, 90W OJ/OJE-LMH: 1,800VA, 200W OJ/OJE-DM: 1,200VA, 150W OJ/OJE-HM: 2,500VA, 280W Note: Consult factory regarding TV-5 rated models. Ratings: OJ/OJE-LM: Operate Data Must Operate Voltage: OJ/OJE -L: 75% of nominal voltage or less. OJ/OJE -D and -H: 70% of nominal voltage or less. Must Release Voltage: OJ/OJE -L: 5% of nominal voltage or more. OJ/OJE -D and -H: 5% of nominal voltage or more. Operate Time: OJ/OJE -L: 15 ms max. OJ/OJE -D and -H: 10 ms max. Release Time: 4 ms max. Initial Dielectric Strength Between Open Contacts: OJ: 750VAC 50/60 Hz. (1 minute). OJE: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: OJ: 4,000VAC 50/60 Hz. (1 minute). OJE: 3,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: OJ: 10,000V (1.2/50µs). OJE: 5,000V (1.2/50µs). Environmental Data Temperature Range: Operating, Class A (105°C) Insulation: OJ/OJE-L: -30°C to +80°C OJ/OJE-D & -H: -30°C to +60°C. Operating, Class F (155°C) Insulation: OJ/OJE-L: -30°C to +105°C OJ/OJE-D and -H: -30°C to +85°C. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Coil Data Voltage: 5 to 48VDC. Nominal Power: OJ/OJE-LM and LMH: 200 mW. OJ/OJE-DMand HM: 450 mW. Coil Temperature Rise: OJ/OJE-LM and LMH : 30°C max., at rated coil voltage. OJ/OJE-DM and HM: 40°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OJ/OJE-SS: Vented (Flux-tight), plastic cover. OJ/OJE-SH: Sealed, plastic case. Weight: 0.32 oz (9g) approximately. 422 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. www.DataSheet4U.com Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) OEG Ordering Information Typical Part Number 1. Basic Series: OJ = 4kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC D = Standard (450mW) Coil, 5A Contacts B OJE -SH -1 12 L M H F ,095 5. Coil Input/Contact Rating: L = Sensitive (200mW) Coil, 3A Contacts** H = Standard (450mW) Coil, 10A Contacts 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. High Capacity Contact Rating Option for Sensitive Coil: H = 8A Contacts (Only available with Coil Input/Contact Rating code "L"). 8. Insulation System: Leave Blank = Class A (105°C) F = Class F (155°C) ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model 9. Suffix: ,000 = Standard model for enclosure code "SS" * Not suitable for immersion cleaning processes. ** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information. Our authorized distributors are more likely to stock the following items for immediate delivery. OJ-SH-105HM,095 OJ-SH-112LMH,095 OJ-SH-124LMH,095 OJE-SH-105DM,095 OJE-SH-112DM,095 OJE-SH-124DM,095 OJE-SH-112HM,095 OJE-SH-105LMH,095 OJE-SH-112LMH,095 OJE-SH-124LMH,095 Outline Dimensions Wiring Diagram (Bottom View) .58 ± .02 (14.7 ± .5) .018 x .018 (.45 x .45) .012 (.3) .157 ± .012 (4.00 ± .3) .012 (.3) .401 ± .02 (10.2 ± .5) .039 (1.0) .039 (1.0) PC Board Layout (Bottom View) 4 – .05 DIA (1.3) .067 (1.71) .300 ± .008 (7.62 ± .2) .300 ± .004 (7.6 ± .1) .500 ± .008 (12.70 ± .2) .716 ± .02 (18.2 ± .5) .067 (1.71) .1 ± .008 (2.54 ± .2) .500 ± .004 (12.7 ± .1) .100 ± .004 (2.54 ± .1) Reference Data Coil Temperature Rise 60 50 Operate Time 12 10 Life Expectancy 100 HM type, 120VAC Res. LMH type, 250VAC Res. Temp. Rise (°C) Time (msec) 40 30 20 10 8 6 Operate Time 4 2 Release Time Operation (x 104) 10 LM type, 250VAC Res. DM type, 250VAC Res. 1 0.7 0 1 2 3 4 5 6 7 8 9 10 Contact Current (A) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 Coil Power (W) Coil Power (W) Test relay: OJE-SH-112LMH Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 423 Refer to inside back cover.