(NTE30026 / NTE30027) Light Emitting Diode

NTE30026 & NTE30027 Light Emitting Diode (LED) PLCC Surface Mount Features: D NTE30026: Super Bright Orange (AllnGaP/GaAs) D NTE30027: Super Bright Blue D 3.5mm x 2.8mm (PLCC) SMT LED, 1.9mm Thickness D Single Color D Suitable for All SMT Assembly and Solder Process D Ideal for Backlighting Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) DC Forward Current, IF NTE30026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA NTE30027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA Peak Forward Current (Note 1), IF(peak) NTE30026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA NTE30027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA Reverse Voltage, VR NTE30026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V NTE30027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4V Power Dissipation, PD NTE30026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mW NTE30027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120mW Electrostatic Discharge (NTE30027 Only), ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150V LED Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +100°C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −30° to +85°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +85°C Reflow Soldering (Preheat +150° to +180°C 60sec to 120sec, 10sec max) . . . . . . . . . . . . . . +260°C Note 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical/Optical Characteristics: (TA = +25°C unless otherwise specified) Parameter Viewing Angle of Half Power Luminous Intensity NTE30026 NTE30027 Symbol 2Q 1/2 IV Test Conditions IF = 20mA IF = 20mA, Note 2 Min − 35 25 Typ 120 60 48 Max − − − Unit degrees mcd mcd Note 2. Tolerance: 30% measured with EXELTRON 2001 Electrical/Optical Characteristics (Cont’d): (TA = +25°C unless otherwise specified) Parameter Forward Voltage NTE30026 NTE30027 Reverse Current NTE30026 NTE30027 Peak Emission Wave Length NTE30026 NTE30027 Dominate Wavelength NTE30026 NTE30027 Spectral Line Half Width NTE30026 NTE30027 Δλ IF = 20mA λd (HUE) IF = 20mA, Note 3 λP IR VR = 5V VR = 4V IF = 20mA Symbol VF Test Conditions IF = 20mA Min − − − − − − − − − − Typ 2.0 3.5 − − 620 468 615 470 20 35 Max 2.5 4.2 10 60 − − − − − − Unit V V μA μA nm nm nm nm nm nm Note 3. The dominate wavelength, λd, is derived from the CIE Chromatic Diagram and represents the color of the device. .138 (3.5) .126 (3.2) .110 (2.8) .087 (2.2) .094 (2.4) Dia Polarity Mark .032 (0.8) .075 (1.9) Anode .0059 (0.15) .031 (0.8) Cathode