(MC33272A / MC33274A) Low Input Offset Voltage Operational Amplifiers

MC33272A, MC33274A, NCV33272A, NCV33274A Single Supply, High Slew Rate, Low Input Offset Voltage Operational Amplifiers The MC33272/74 series of monolithic operational amplifiers are quality fabricated with innovative Bipolar design concepts. This dual and quad operational amplifier series incorporates Bipolar inputs along with a patented Zip−R−Trim element for input offset voltage reduction. The MC33272/74 series of operational amplifiers exhibits low input offset voltage and high gain bandwidth product. Dual−doublet frequency compensation is used to increase the slew rate while maintaining low input noise characteristics. Its all NPN output stage exhibits no deadband crossover distortion, large output voltage swing, and an excellent phase and gain margin. It also provides a low open loop high frequency output impedance with symmetrical source and sink AC frequency performance. Features http://onsemi.com MARKING DIAGRAMS DUAL 8 PDIP−8 P SUFFIX CASE 626 1 SOIC−8 D SUFFIX CASE 751 1 x = A for MC33272AD/DR2 = N for NCV33272ADR2 QUAD PDIP−14 P SUFFIX CASE 646 14 1 14 1 14 MC33274ADG AWLYWW 1 1 14 TSSOP−14 DTB SUFFIX CASE 948G 1 1 NCV3 3274 ALYWG G SOIC−14 D SUFFIX CASE 751A 14 NCV33274ADG AWLYWW 1 14 MC33274AP AWLYYWWG 1 8 8 1 33272 ALYWx G MC33272AP AWL YYWWG 8 • • • • • • • • • • • • • • Input Offset Voltage Trimmed to 100 mV (Typ) Low Input Bias Current: 300 nA www.DataSheet4U.com Low Input Offset Current: 3.0 nA High Input Resistance: 16 MW Low Noise: 18 nV/ √ Hz @ 1.0 kHz High Gain Bandwidth Product: 24 MHz @ 100 kHz High Slew Rate: 10 V/ms Power Bandwidth: 160 kHz Excellent Frequency Stability Unity Gain Stable: w/Capacitance Loads to 500 pF Large Output Voltage Swing: +14.1 V/ −14.6 V Low Total Harmonic Distortion: 0.003% Power Supply Drain Current: 2.15 mA per Amplifier Single or Split Supply Operation: +3.0 V to +36 V or ±1.5 V to ±18 V • ESD Diodes Provide Added Protection to the Inputs • Pb−Free Packages are Available • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes 14 A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week G or G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 11 of this data sheet. © Semiconductor Components Industries, LLC, 2006 October, 2006 − Rev. 11 1 Publication Order Number: MC33272A/D MC33272A, MC33274A, NCV33272A, NCV33274A PIN CONNECTIONS DUAL CASE 626/751 Output 1 Inputs 1 VEE 1 2 3 4 − + − + 8 7 6 5 QUAD CASE 646/751A/948G Output 1 Inputs 1 3 1 2 − + − + 14 13 VCC Output 2 Inputs 2 Output 4 Inputs 4 1 4 12 11 (Top View) VCC Inputs 2 4 5 6 + − + − VEE Inputs 3 Output 3 10 9 8 2 3 Output 2 7 (Top View) MAXIMUM RATINGS Rating Supply Voltage Input Differential Voltage Range Input Voltage Range Output Short Circuit Duration (Note 2) Maximum Junction Temperature Storage Temperature ESD Protection at Any Pin − Human Body Model − Machine Model Symbol VCC to VEE VIDR VIR tSC TJ Tstg Vesd Value +36 Note 1 Note 1 Indefinite +150 −60 to +150 2000 200 Note 2 −40 to +85 −40 to +125 Unit V V V sec °C °C V Maximum Power Dissipation Operating Temperature Range MC33272A, MC33274A NCV33272A, NCV33274A PD TA mW °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Either or both input voltages should not exceed VCC or VEE. 2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded (see Figure 2). http://onsemi.com 2 MC33272A, MC33274A, NCV33272A, NCV33274A DC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = −15 V, TA = 25°C, unless otherwise noted.) Characteristics Input Offset Voltage (RS = 10 W, VCM = 0 V, VO = 0 V) (VCC = +15 V, VEE = −15 V) TA = +25°C TA = −40° to +85°C TA = −40° to +125°C (NCV33272A) TA = −40° to +125°C (NCV33274A) (VCC = 5.0 V, VEE = 0) TA = +25°C Average Temperature Coefficient of Input Offset Voltage RS = 10 W, VCM = 0 V, VO = 0 V, TA = −40° to +125°C Input Bias Current (VCM = 0 V, VO = 0 V) TA = +25°C TA = Tlow to Thigh Input Offset Current (VCM = 0 V, VO = 0 V) TA = +25°C TA = Tlow to Thigh Common Mode Input Voltage Range (DVIO = 5.0 mV, VO = 0 V) TA = +25°C Large Signal Voltage Gain (VO = 0 V to 10 V, RL = 2.0 kW) TA = +25°C TA = Tlow to Thigh Output Voltage Swing (VID = ±1.0 V) (VCC = +15 V, VEE = −15 V) RL = 2.0 kW RL = 2.0 kW RL = 10 kW RL = 10 kW (VCC = 5.0 V, VEE = 0 V) RL = 2.0 kW RL = 2.0 kW Common Mode Rejection (Vin = +13.2 V to −15 V) Power Supply Rejection VCC/VEE = +15 V/ −15 V, +5.0 V/ −15 V, +15 V/ −5.0 V Output Short Circuit Current (VID = 1.0 V, Output to Ground) Source Sink Power Supply Current Per Amplifier (VO = 0 V) (VCC = +15 V, VEE = −15 V) TA = +25°C TA = Tlow to Thigh (VCC = 5.0 V, VEE = 0 V) TA = +25°C 3. MC33272A, MC33274A Tlow = −40°C NCV33272A, NCV33274A Tlow = −40°C Thigh = +85°C Thigh = +125°C 6 7 Figure 3 Symbol |VIO| − − − − − 3 4, 5 DVIO/DT − IIB − − |IIO| − − VICR VEE to (VCC −1.8) AVOL 90 86 8, 9, 12 VO + VO − VO + VO − VOL VOH CMR PSR 80 16 ISC +25 −25 105 +37 −37 − − − mA 13.4 − 13.4 − − 3.7 80 13.9 −13.9 14 −14.7 − − 100 − −13.5 − −14.1 0.2 5.0 − dB dB 100 − − − V dB 3.0 − 65 80 V 300 − 650 800 nA 2.0 − nA 0.1 − − − − 1.0 1.8 2.5 3.5 2.0 mV/°C Min Typ Max Unit mV 10, 11 13 14, 15 17 ICC − − − 2.15 − − 2.75 3.0 2.75 mA http://onsemi.com 3 MC33272A, MC33274A, NCV33272A, NCV33274A AC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = −15 V, TA = 25°C, unless otherwise noted.) Characteristics Slew Rate (Vin = −10 V to +10 V, RL = 2.0 kW, CL = 100 pF, AV = +1.0 V) Gain Bandwidth Product (f = 100 kHz) AC Voltage Gain (RL = 2.0 kW, VO = 0 V, f = 20 kHz) Unity Gain Bandwidth (Open Loop) Gain Margin (RL = 2.0 kW, CL = 0 pF) Phase Margin (RL = 2.0 kW, CL = 0 pF) Channel Separation (f = 20 Hz to 20 kHz) Power Bandwidth (VO = 20 Vpp, RL = 2.0 kW, THD ≤ 1.0%) Total Harmonic Distortion (RL = 2.0 kW, f = 20 Hz to 20 kHz, VO = 3.0 Vrms, AV = +1.0) Open Loop Output Impedance (VO = 0 V, f = 6.0 MHz) Differential Input Resistance (VCM = 0 V) Differential Input Capacitance (VCM = 0 V) Equivalent Input Noise Voltage (RS = 100 W, f = 1.0 kHz) Equivalent Input Noise Current (f = 1.0 kHz) 30 31 28 29 23, 24, 26 23, 25, 26 27 Figure 18, 33 19 20, 21, 22 Symbol SR GBW AVO BW Am fm CS BWP THD |ZO| Rin Cin en in Min 8.0 17 − − − − − − − − − − − − Typ 10 24 65 5.5 12 55 −120 160 0.003 35 16 3.0 18 0.5 Max − − − − − − − − − − − − − − Unit V/ms MHz dB MHz dB Deg dB kHz % W MW pF nV/ √ Hz pA/ √ Hz VCC Vin − + Vin + Sections B C D VO + VEE Figure 1. Equivalent Circuit Schematic (Each Amplifier) http://onsemi.com 4 MC33272A, MC33274A, NCV33272A, NCV33274A P D (MAX), MAXIMUM POWER DISSIPATION (mW) 2400 V IO , INPUT OFFSET VOLTAGE (mV) 2000 MC33272P & MC33274P 1600 1200 800 400 0 −60 −40 −20 0 20 40 60 80 100 120 140 160 180 MC33274D 5.0 3.0 1.0 2 −1.0 −3.0 −5.0 −55 3 1. VIO > 0 @ 25°C 2. VIO = 0 @ 25°C 3. VIO < 0 @ 25°C VCC = +15 V VEE = −15 V VCM = 0 V 1 1 3 2 MC33272D −25 0 25 50 75 100 125 TA, AMBIENT TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C) Figure 2. Maximum Power Dissipation versus Temperature Figure 3. Input Offset Voltage versus Temperature for Typical Units 400 I IB, INPUT BIAS CURRENT (nA) I IB, INPUT BIAS CURRENT (nA) 350 300 250 200 150 100 50 0 −16 VCC = +15 V VEE = −15 V TA = 25°C 600 500 400 300 200 100 0 −55 VCC = +15 V VEE = −15 V VCM = 0 V −12 −8.0 −4.0 0 4.0 8.0 12 16 −25 0 25 50 75 100 125 VCM, COMMON MODE VOLTAGE (V) TA, AMBIENT TEMPERATURE (°C) Figure 4. Input Bias Current versus Common Mode Voltage V ICR, INPUT COMMON MODE VOLTAGE RANGE (V) Figure 5. Input Bias Current versus Temperature VCC VCC A VOL, OPEN LOOP VOLTAGE GAIN (X 1.0 kV/V) 180 VCC −0.5 VCC −1.0 160 VCC −1.5 VCC −2.0 140 VCC = +15 V VEE = −15 V RL = 2.0 kW f = 10 Hz DVO = −10 V to +10 V −25 0 25 50 75 100 125 VEE +1.0 VEE −25 0 25 50 VEE +0.5 VEE −55 VCC = +5.0 V to +18 V VEE = −5.0 V to −18 V DVIO = 5.0 mV VO = 0 V 75 100 125 120 100 −55 TA, AMBIENT TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C) Figure 6. Input Common Mode Voltage Range versus Temperature Figure 7. Open Loop Voltage Gain versus Temperature http://onsemi.com 5 MC33272A, MC33274A, NCV33272A, NCV33274A V sat , OUTPUT SATURATION VOLTAGE (V) 40 VO , OUTPUT VOLTAGE (Vpp ) TA = 25°C 30 RL = 10 kW 20 RL = 2.0 kW VCC VCC −1.0 TA = 125°C VCC −2.0 VEE +2.0 VEE +1.0 VEE Sink TA = 125°C VCC = +5.0 V to +18 V VEE = −5.0 V to −18 V 0 5.0 10 IL, LOAD CURRENT (±mA) 15 20 TA = 25°C Source TA = −55°C TA = 25°C TA = −55°C 10 0 0 5.0 10 15 20 VCC, VEE SUPPLY VOLTAGE (V) Figure 8. Split Supply Output Voltage Swing versus Supply Voltage Figure 9. Split Supply Output Saturation Voltage versus Load Current V sat , OUTPUT SATURATION VOLTAGE (V) TA = 125°C TA = 55°C VCC −4.0 VCC −8.0 VCC −12 +0.2 +0.1 Gnd 0 100 VCC VCC = +5.0 V to +18 V RL to Gnd VEE = Gnd V sat , OUTPUT SATURATION VOLTAGE (V) VCC 15 14.6 14.2 TA = 25°C TA = 55°C TA = 125°C 8.0 4.0 0 10 TA = 125°C TA = +25°C TA = −55°C 1.0 k 10 k 100 k 1.0 M TA = 25°C TA = −55°C TA = 125°C VCC = +15 V RL to VCC VEE = Gnd RFdbk = 100 kW 10 k 100 k 100 1.0 k RL , LOAD RESISTANCE TO GROUND (kW) RL, LOAD RESISTANCE TO VCC (W) Figure 10. Single Supply Output Saturation Voltage versus Load Resistance to Ground Figure 11. Si