SCHOTTKY RECTIFIER

Bulletin PD-20623 rev. A 08/03 MBR40L15CW SCHOTTKY RECTIFIER 2 x 20 Amps TO-247AC Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine www.DataSheet4U.com Description/ Features Units A V A V The MBR40L15CW center tap Schottky rectifier module has been optimized for ultra low forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125 °C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. 125°C TJ operation (VR < 5V) Center tap module Optimized for OR-ing applications Ultra low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance 3. 65 (0 .14 4) Value 40 15 700 0.26 VF TJ @ 20Apk, TJ=125°C (per leg, Typical) - 55 to 125 °C 15 .90 (0 .626 ) 15 .30 (0 .602 ) 3. 55 (0 .13 9) DIA. 5. 30 (0 .20 9) 4.70 ( 0.185) 2.5 ( 0.098) 1.5 ( 0.059) 5. 70 (0 .22 5) 5.30 ( 0.208) 20 .30 (0 .800 ) 19 .70 (0 .775 ) 5.50 ( 0.217) 4. 50 (0 .17 7) 1 2 3 (2 PLCS.) 1 2 3 BASE COMMON CATHODE 2 14. 80 ( 0.583) 14 .20 ( 0 .559 ) ANODE COMMON ANODE CATHODE 1 2 4. 30 (0 .17 0) 3. 70 (0 .14 5) 2. 20 (0 .08 7) 2. 40 (0 .09 5) M AX . 0.80 ( 0.032) 0. 40 (0 .21 3) 1. 40 ( 0 .05 6) M AX. 1. 00 (0 .03 9) 10. 94 ( 0.430) 10 .86 (0 .427 ) Conform to JEDEC outline TO-247AC (TO-3P) Dimensions in millimeters and inches www.irf.com 1 MBR40L15CW Bulletin PD-20623 rev. A 08/03 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) @ TJ = 100 °C VRWM Max. Working Peak Reverse Voltage (V) @ TJ = 100 °C STPS40L15CW 15 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) Value 20 40 700 330 5 2 Units A Conditions 50% duty cycle @ TC = 86°C, rectangular wave form 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) A mJ A TJ = 25 °C, IAS = 2 Amps, L = 6 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Forward Voltage Drop (Per Leg) * See Fig. 1 Value Typ. Max. 0.42 0.52 0.26 0.34 0.37 0.50 (1) 10 600 7.6 8 2000 - Units V V V V mA mA V mΩ pF nH V/ µs @ 20A @ 40A @ 20A @ 40A Conditions TJ = 25 °C TJ = 125 °C VR = rated VR (1) IRM Reverse Leakage Current (Per Leg) * See Fig. 2 TJ = 25 °C TJ = 100 °C TJ = TJ max. VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 0.182 VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) 10000 (1) Pulse Width < 300µs, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Value -55 to 125 -55 to 150 1.4 0.7 0.24 6 (0.21) Min. Max. 6 (5) 12 (10) Units °C °C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style °C/W DC operation °C/W DC operation * See Fig. 4 °C/W Mounting surface , smooth and greased g (oz.) Kg-cm Non-lubricated threads (Ibf-in) TO-247AC (TO-3P) JEDEC 2 www.irf.com MBR40L15CW Bulletin PD-20623 rev. A 08/03 1000 1000 T = 100°C J 100 75°C 50°C Reverse Current - I R (mA) 10 25°C 1 Instantaneous Forward Current - IF (A) 100 0.1 0 3 6 9 12 15 Reverse Voltage - V R (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 10000 Junction Capacitance - C T (pF) 10 T = 125°C J T = 75°C J T = 25°C J TJ = 25°C 1000 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage Drop - V FM (V) 100 0 5 10 15 20 Reverse Voltage - VR (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 10 T hermal Impedance Z thJC (°C/W) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 P DM 0.1 Notes: S ingle Pulse (T hermal Resistance) 0.01 0.00001 t1 t2 1. Duty factor D = t 1/ t 2 2. Peak T = P x ZthJC+ TC J DM 0.1 1 10 100 0.0001 0.001 0.01 t 1 , Rec tangular Pulse Duration (S econds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 MBR40L15CW Bulletin PD-20623 rev. A 08/03 14 Average Power Los - (Watts) s 12 10 8 6 4 2 0 0 5 10 15 20 25 0 5 10 15 20 25 30 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMSLimit DC 100 Allowable Case T emperature - (°C) 95 90 85 80 75 70 S quare wave (D = 0.50) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics 1000 Non-R epetitive S urge Current - I FS (A) M At Any Rated Load Condition And With Rated VRRM Applied Following S urge 100 10 100 1000 10000 S quare Wave Pulse Duration - t p (micros ec) Fig. 7 - Maximum Non-Repetitive Surge Current L HIGH-S PEED S CH WIT FREE-WHEEL DIODE 40HF L40S 02 Vd = 25 Volt DUT IR FP460 R = 25 ohm g + CURR ENT MONIT OR Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com MBR40L15CW Bulletin PD-20623 rev. A 08/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/03 www.irf.com 5