Lead (Pb)-Free Precision Leaded Resistors

MBA 0204, MBB 0207, MBE 0414 - Precision Vishay Beyschlag Lead (Pb)-Free Precision Leaded Resistors FEATURES • • • • • • Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to ± 25 ppm/K Precision tolerance of value: ± 0.1 % and ± 0.25 % Lead (Pb)-free solder contacts Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes • Compatible with “Restriction of the use of Hazardous Substances” (RoHS) directive 2002/95/EC (issue 2004) • Superior overall stability: class 0.05 • Wide precision range: 10 Ω to 1.5 MΩ DESCRIPTION MBA 0204, MBB 0207 and MBE 0414 precision leaded thin film resistors combine the proven reliability of the professional products with an advanced level of precision and stability. Therefore they are perfectly suited for applications in the fields of test and measuring equipment along with industrial and medical electronics. APPLICATIONS • Test and measuring equipment • Industrial electronics • Medical electronics. METRIC SIZE DIN: CECC: 0204 A 0207 B 0414 D www.DataSheet4U.com TECHNICAL SPECIFICATIONS DESCRIPTION CECC size Resistance range Resistance tolerance Temperature coefficient Operation mode Climatic category (LCT/UCT/days) Rated dissipation, P70 Operating voltage, Umax AC/DC Film temperature Max. resistance change at P70 1000 h 8000 h 225000 h Specified lifetime Permissible voltage against ambient : 1 minute continuous Failure rate 300 V 75 V ≤ 0.7 × 10−9/h 500 V 75 V ≤ 0.3 × 10−9/h 800 V 75 V ≤ 0.1 × 10−9/h 85 °C precision 10/85/56 0.07 W 200 V 125 °C 85 °C standard 55/125/56 0.25 W MBA 0204 A 22 Ω to 332 kΩ MBB 0207 B 10 Ω to 1 MΩ ± 0.25 %; ± 0.1 % ± 25 ppm/K; ± 15 ppm/K precision 10/85/56 0.11 W 300 V 125 °C 85 °C standard 55/125/56 0.40 W precision 10/85/56 0.17 W 500 V 125 °C standard 55/125/56 0.65 W MBE 0414 D 22 Ω to 1.5 MΩ 100 Ω to 100 kΩ ≤ 0.05 % ≤ 0.1 % ≤ 0.3 % ≤ 0.25 % ≤ 0.5 % ≤ 1.5 % 100 Ω to 270 kΩ ≤ 0.03 % ≤ 0.1 % ≤ 0.3 % ≤ 0.15 % ≤ 0.5 % ≤ 1.5 % 100 Ω to 470 kΩ ≤ 0.05 % ≤ 0.1 % ≤ 0.3 % ≤ 0.25 % ≤ 0.5 % ≤ 1.5 % 225000 h 225000 h 225000 h www.vishay.com 56 For technical questions contact: ff3cresistors@vishay.com Document Number: 28725 Revision: 20-Sep-05 MBA 0204, MBB 0207, MBE 0414 - Precision Lead (Pb)-Free Precision Leaded Resistors 12NC INFORMATION • The resistors have a 12-digit numeric code starting with 2312. • The subsequent 4 digits indicate the resistor type, specification and packing; see the 12NC Ordering Code table. • The remaining 4 digits indicate the resistance value: – The first 3 digits indicate the resistance value. – The last digit indicates the resistance decade in accordance with the 12NC Indicating Resistance Decade table. Vishay Beyschlag Last Digit of 12NC Indicating Resistance Decade RESISTANCE DECADE 10 Ω to 99.9 Ω 100 Ω to 999 Ω 1 kΩ to 9.99 kΩ 10 kΩ to 99.9 kΩ 100 kΩ to 999 kΩ 1 MΩ to 9.99 MΩ LAST DIGIT 9 1 2 3 4 5 12NC Example The 12NC code of a MBA 0204 resistor, value 47 kΩ and TC 25 with ± 0.1 % tolerance, supplied on bandolier in a box of 5000 units is: 2312 906 74703. 12NC - resistor type and packing DESCRIPTION TYPE T.C. ± 25 ppm/K MBA 0204 ±15 ppm/K ± 25 ppm/K MBB 0207 ± 15 ppm/K ± 25 ppm/K MBE 0414 ± 15 ppm/K TOL. ± 0.25 % ± 0.1 % ± 0.25 % ± 0.1 % ± 0.25 % ± 0.1 % ± 0.25 % ± 0.1 % ± 0.25 % ± 0.1 % ± 0.25 % ± 0.1 % C1 1000 units 901 6.... 901 7.... 902 6.... 902 7.... 911 6.... 911 7.... 912 6.... 912 7.... 921 6.... 921 7.... 922 6.... 922 7.... ORDERING CODE 2312 ... ..... BANDOLIER IN BOX CT 5000 units 906 6.... 906 7.... 907 6.... 907 7.... 916 6.... 916 7.... 917 6.... 917 7.... − − − − Resistance ranges printed in bold are preferred T.C. / tolerance combinations with optimized availability. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: MBA02040D4702BCT M MODEL/SIZE MBA0204 MBB0207 MBE0414 B A 0 2 0 4 TC 0 D 4 VALUE 7 0 2 B C T P 0 SPECIAL up to 2 digits 00 = standard SPECIAL CHARACTER 0 = neutral TOLERANCE B = ± 0.1 % C = ± 0.25 % PACKING CT C1 E = ± 15 ppm/K D = ± 25 ppm/K 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 2 = *102 8 = *10-2 3 = *103 9 = *10-1 4 = *104 0 = *100 5 = *105 1 = *101 6 = *106 PRODUCT DESCRIPTION: MBA 0204 -25 0.1% CT 47K MBA MODEL MBA MBB MBE 1) 0204 SIZE 0204 0207 0414 -25 TC ± 15 ppm/K ± 25 ppm/K 0.1 % TOLERANCE ± 0.1 % ± 0.25 % CT PACKING1) CT C1 47K RESISTANCE VALUE 47K = 47KΩ 50R1 = 50.1Ω Please refer to table PACKING, page 3. NOTE: Products can be ordered using either the 12NC or the PRODUCT DESCRIPTION. The PART NUMBER is shown to facilitate the introduction of the unified part numbering system. Currently, this PART NUMBER is applicable in the Americas only. Document Number: 28725 Revision: 20-Sep-05 For technical questions contact: ff3cresistors@vishay.com www.vishay.com 57 MBA 0204, MBB 0207, MBE 0414 - Precision Vishay Beyschlag Lead (Pb)-Free Precision Leaded Resistors PACKING MODEL MBA 0204 MBB 0207 MBE 0414 BOX PIECES/BOX 1 000 5 000 1 000 5 000 1 000 5 000 CODE C1 CT C1 CT C1 CT DIMENSIONS L D M I I d DIMENSIONS - leaded resistor types, mass and relevant physical dimensions TYPE MBA 0204 MBB 0207 MBE 0414 Note 1. For 7.5 ≤ M < 10.0 mm, use version MBB 0207 ... L0 without lacquer on the leads. Dmax (mm) 1.6 2.5 4.0 Lmax (mm) 3.6 6.3 11.9 dnom (mm) 0.5 0.6 0.8 Imin (mm) 29.0 28.0 31.0 Mmin (mm) 5.0 10.0(1) 15.0 MASS (mg) 125 220 700 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE DESCRIPTION T.C. TOLERANCE ± 0.25 % ± 25 ppm/K ± 0.1 % 43 Ω to 332 kΩ 10 Ω to 1 MΩ 43 Ω to 1 MΩ MBA 0204 22 Ω to 332 kΩ RESISTANCE VALUE(1) MBB 0207 10 Ω to 1 MΩ MBE 0414 22 Ω to 1.5 MΩ ± 0.25 % ± 15 ppm/K ± 0.1 % 22 Ω to 221 kΩ 10 Ω to 1 MΩ 22 Ω to 1 MΩ 43 Ω to 221 kΩ 10 Ω to 1 MΩ 43 Ω to 1 MΩ Note 1. Resistance values to be selected from E96 and E192 series, for other values please contact factory. Resistance ranges printed in bold are preferred T.C. / tolerance combinations with optimized availability. www.vishay.com 58 For technical questions contact: ff3cresistors@vishay.com Document Number: 28725 Revision: 20-Sep-05 MBA 0204, MBB 0207, MBE 0414 - Precision Lead (Pb)-Free Precision Leaded Resistors Vishay Beyschlag DESCRIPTION Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body (85 % Al2O3) and conditioned to achieve the desired temperature coefficient. Nickel plated steel termination caps are firmly pressed on the metallised rods. A special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. A further conditioning is applied in order to stabilise the trimming result. Connecting wires of electrolytic copper plated with 100 pure tin are welded to the termination caps. The resistors are covered by protective coating designed for electrical, mechanical and climatic protection.The terminations receive a final pure tin on nickel plating. Four or five colour code rings designate the resistance value and tolerance in accordance with IEC 60062. The result of the determined production is verified by an extensive testing procedure performed on 100 of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1. The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth has been proven under extensive testing. All products comply with the CEFIC-EECA-EICTA list of legal restrictions on hazardous substances. This includes full compliance with the following directives: • 2000/53/EC End of Vehicle Life Directive (ELV) • 2000/53/EC Annex II to End of Vehicle Life Directive (ELV II) • 2002/95/EC Restriction of the use of Hazardous Substances Directive (RoHS) • 2002/96/EC Waste Electrical and Electrical Equipment Directive (WEEE) APPROVALS Where applicable, the resistors are tested in accordance with CECC 40101-806 which refers to EN 60115-1 and EN 140100. Approval of conformity is indicated by the CECC logo on the package label. Vishay BEYSCHLAG has achieved "Approval Manufacturer" in accordance with EN 100114-1. of ASSEMBLY The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Excellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. SPECIALS On request, resistors are available with established reliability in accordance with CECC 40101-806 Version E. Please refer to the special data sheet for information on failure rate level, available resistance ranges and ordering codes. FUNCTIONAL PERFORMANCE Power Dissipation P 1 MBE 0414 MBB 0207 MBA 0204 W 0.5 0 -50 0 50 70 100 C 150 Ambient Temperature ϑ amb Derating - Long Term Operation Document Number: 28725 Revision: 20-Sep-05 For technical questions contact: ff3cresistors@vishay.com www.vishay.com 59 MBA 0204, MBB 0207, MBE 0414 - Precision Vishay Beyschlag Lead (Pb)-Free Precision Leaded Resistors Power Dissipation P MBE 0414 MBB 0207 MBA 0204 0.2 W 0.1 0 -50 0 50 70 100 C 150 Ambient Temperature ϑ amb Derating - Precision Operation Temperature Rise Tr 60 K 40 MBA 0204 MBB 0207 MBE 0414 20 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 W 0.8 Load P Rise of the surface temperature. Temperature Rise Current Noise A1 1 µV/V 0.1 MBA 0204 MBB 0207 MBE 0414 0.01 1 kΩ 10 k�