(MB90340E Series) 16-bit Proprietary Microcontroller CMOS

www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS07-13747-1E 16-bit Proprietary Microcontroller CMOS F2MC-16LX MB90340E Series MB90F342E(S), MB90F342CE(S), MB90F343E(S), MB90F343CE(S), MB90F345E(S), MB90F345CE(S), MB90F346E(S), MB90F346CE(S), MB90F347E(S), MB90F347CE(S), MB90F349E(S), MB90F349CE(S), MB90341E(S), MB90341CE(S), MB90342E(S), MB90342CE(S), MB90346E(S), MB90346CE(S), MB90347E(S), MB90347CE(S), MB90348E(S), MB90348CE(S), MB90349E(S), MB90349CE(S), MB90V340E-101/102 ■ DESCRIPTION The MB90340E-series with up to 2 FULL-CAN* interfaces and Flash ROM is especially designed for automotive and other industrial applications. Its main feature are the on-board CAN Interfaces, which conform to V2.0 Part A and Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full CAN approach. With the new 0.35 µm CMOS technology, Fujitsu now offers on-chip Flash ROM program memory up to 512 Kbytes. The power to the MCU core (3V) is supplied by a built-in regulator circuit, giving these microcontrollers superior performance in terms of power consumption and tolerance to EMI. * : Controller Area Network (CAN) - License of Robert Bosch GmbH Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller. Be sure to refer to the “Check Sheet” for the latest cautions on development. “Check Sheet” is seen at the following support page URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development. Copyright©2006 FUJITSU LIMITED All rights reserved MB90340E Series ■ FEATURES • CPU • Instruction system best suited to controller - Wide choice of data types (bit, byte, word, and long word) - Wide choice of addressing modes (23 types) - Enhanced functionality with signed multiply and divide instructions and the RETI instruction - Enhanced high-precision computing with 32-bit accumulator • Instruction system compatible with high-level language (C language) and multitask - Employing system stack pointer - Various enhanced pointer indirect instructions - Barrel shift instructions • Increased processing speed - 4-byte instruction queue • Serial interface • UART (LIN/SCI) : up to 4 channels - Equipped with full-duplex double buffer - Clock-asynchronous or clock-synchronous serial transmission is available • I2C interface*1 : up to 2 channels (only for devices with a C suffix in the part number) - Up to 400 Kbits/s transfer rate • Interrupt controller • Powerful 8-level, 34-condition interrupt feature • Up to 16 external interrupts are supported • Automatic data transfer function independent of CPU - Expanded intelligent I/O service function (EI2OS) : up to 16 channels • I/O ports • General-purpose input/output port (CMOS output) - 80 ports (for devices without an S suffix in the part number - i.e. devices that support the sub clock) - 82 ports (for devices with an S suffix in the part number - i.e. devices that do not support the sub clock) • 8/10-bit A/D converter : 16 channels 24 channels (only for devices with a C suffix in the part number) • Resolution is selectable between 8-bit and 10-bit. • Activation by external trigger input is allowed. • Conversion time : 3 µs (at 24-MHz machine clock, including sampling time) • Program patch function • Detects address matches against 6 address pointers • Timer • Time-base timer, watch timer, watchdog timer : 1 channel • 8/16-bit PPG timer : 8-bit × 16 channels, or 16-bit × 8 channels • 16-bit reload timer : 4 channels • 16-bit input/output timer - 16-bit free-run timer : 2 channels (FRT0 : ICU 0/1/2/3, OCU 0/1/2/3, FRT1 : ICU 4/5/6/7, OCU 4/5/6/7) - 16-bit input capture: (ICU): 8 channels - 16-bit output compare: (OCU): 8 channels 2 MB90340E Series • Full-CAN controller*2 • Up to 2 channels • Compliant with Ver2.0A and Ver2.0B CAN specifications • 16 built-in message buffers • CAN wake-up function • Low power consumption (standby) mode • Sleep mode (a mode that halts CPU operating clock) • Timebase timer mode (a mode where only the oscillation clock, sub clock, timebase timer and watch timer operate) • Watch mode (a mode that operates sub clock and clock timer only) • Stop mode (a mode that stops oscillation clock and sub clock) • CPU intermittent operation mode • Technology • 0.35 µm CMOS technology *1 : I2C license : Purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Rights to use, these components in an I2C system provided that the system conforms to the I2C Standard Specification as defined by Philips. *2 : Controller Area Network (CAN) - License of Robert Bosch GmbH. 3 MB90340E Series ■ PRODUCT LINEUP Part Number MB90V340E-101, MB90V340E-102 MB90F342E(S), MB90F342CE(S), MB90F343E(S)*1, MB90F343CE(S)*1, MB90F345E(S), MB90F345CE(S), MB90F346E(S), MB90F346CE(S), MB90F347E(S), MB90F347CE(S), MB90F349E(S), MB90F349CE(S) MB90341E(S)*1, MB90341CE(S)*1, MB90342E(S)*1, MB90342CE(S)*1, MB90346E(S), MB90346CE(S), MB90347E(S), MB90347CE(S), MB90348E(S)*1, MB90348CE(S)*1, MB90349E(S)*1, MB90349CE(S)*1 Parameter Type CPU System clock Evaluation products Flash memory products F MC-16LX CPU 2 MASK ROM products On-chip PLL clock multiplier (×1, ×2, ×3, ×4, ×6, 1/2 when PLL stops) Minimum instruction execution time : 42 ns (4 MHz osc. PLL × 6) 256 Kbytes : 512 Kbytes : MB90F345E(S), MB90F345CE(S) 384 Kbytes : MB90F343E(S), MB90F343CE(S) 256 Kbytes : MB90F342E(S), MB90F342CE(S), MB90F349E(S), MB90F349CE(S) 128 Kbytes : MB90F347E(S), MB90F347CE(S) 64 Kbytes : MB90F346E(S), MB90F346CE(S) 20 Kbytes : MB90F343E(S), MB90F343CE(S), MB90F345E(S), MB90F345CE(S) 16 Kbytes : MB90F342E(S), MB90F342CE(S), MB90F349E(S), MB90F349CE(S) 6 Kbytes : MB90F347E(S), MB90F347CE(S) 2 Kbytes : MB90F346E(S), MB90F346CE(S) MB90342E(S), MB90342CE(S), MB90349E(S), MB90349CE(S) 128 Kbytes : MB90341E(S), MB90341CE(S), MB90348E(S), MB90348CE(S), MB90347E(S), MB90347CE(S) 64 Kbytes : MB90346E(S), MB90346CE(S) ROM External RAM 30 Kbytes 16 Kbytes : MB90341E(S), MB90341CE(S), MB90342E(S), MB90342CE(S), MB90348E(S), MB90348CE(S), MB90349E(S), MB90349CE(S) 6 Kbytes : MB90347E(S), MB90347CE(S) 2 Kbytes : MB90346E(S), MB90346CE(S) Emulator-specific power supply*2 Technology Operating voltage range Temperature range Package Yes ⎯ 0.35 µm CMOS with 0.35 µm CMOS with built-in power supply regulator + regulator for built-in Flash memory with Charge pump for programming voltage power supply 5 V ± 10% ⎯ PGA-299 5 channels 3.5 V to 5.5 V : When normal operating (not using A/D converter) 4.0 V to 5.5 V : When using the A/D converter/Flash programming 4.5 V to 5.5 V : When using the external bus −40 °C to +105 °C QFP-100, LQFP-100 4 channels UART Wide range of baud rate settings using a dedicated reload timer Special synchronous options for adapting to different synchronous serial protocols LIN functionality working either as master or slave LIN device 2 channels Devices with a C suffix in the part number : 2channels Devices without a C suffix in the part number : ⎯ (Continued) I2C (400 kbps) 4 MB90340E Series Part Number MB90V340E-101, MB90V340E-102 Parameter 24 input channels A/D Converter MB90F342E(S), MB90F342CE(S), MB90F343E(S)*1, MB90F343CE(S)*1, MB90F345E(S), MB90F345CE(S), MB90F346E(S), MB90F346CE(S), MB90F347E(S), MB90F347CE(S), MB90F349E(S), MB90F349CE(S) MB90341E(S)*1, MB90341CE(S)*1, MB90342E(S)*1, MB90342CE(S)*1, MB90346E(S), MB90346CE(S), MB90347E(S), MB90347CE(S), MB90348E(S)*1, MB90348CE(S)*1, MB90349E(S)*1, MB90349CE(S)*1 Devices with a C suffix in the part number : 24 channels Devices without a C suffix in the part number : 16 channels 10-bit or 8-bit resolution Conversion time : Min 3 µs include sample time (per one channel) 16-bit Reload Timer Operation clock frequency : fsys/21, fsys/23, fsys/25 (fsys = Machine clock frequency) Supports External Event Count function (4 channels) Generates an interrupt signal on overflow Supports Timer Clear when the output compare finds a match Operation clock freq. : fsys, fsys/21, fsys/22, fsys/23, fsys/24, fsys/25, fsys/26, fsys/27 (fsys = Machine clock freq.) I/O Timer 0 (clock input FRCK0) corresponds to ICU 0/1/2/3, OCU 0/1/2/3 I/O Timer 1 (clock input FRCK1) corresponds to ICU 4/5/6/7, OCU 4/5/6/7 Generates an interrupt signal when one of the 16-bit I/O timer matches the output compare register A pair of compare registers can be used to generate an output signal. 16-bit I/O Timer (2 channels) 16-bit Output Compare (8 channels) 16-bit Input Capture Rising edge, falling edge or rising & falling edge sensitive (8 channels) Signals an interrupt upon external event 8 channels (16-bit) /16 channels (8-bit) Sixteen 8-bit reload counters Sixteen 8-bit reload registers for L pulse width Sixteen 8-bit reload registers for H pulse width Supports 8-bit and 16-bit operation modes A pair of 8-bit reload counters can be configured as one 16-bit reload counter or as 8-bit prescaler plus 8-bit reload counter Operating clock freq. : fsys, fsys/21, fsys/22, fsys/23, fsys/24 or 128 µs@fosc = 4 MHz (fsys = Machine clock frequency, fosc = Oscillation clock frequency) 2 channels : MB90F342E(S), MB90F342CE(S), MB90F343E(S), MB90F343CE(S), MB90F345E(S), MB90F345CE(S) 1 channel : MB90F346E(S), MB90F346CE(S), MB90F347E(S), MB90F347CE(S), MB90F349E(S), MB90F349CE(S) 2 channels : MB90341E(S), MB90341CE(S), MB90342E(S), MB90342CE(S) 1 channel : MB90346E(S), MB90346CE(S), MB90347E(S), MB90347CE(S), MB90348E(S), MB90348CE(S), MB90349E(S), MB90349CE(S) 8/16-bit Programmable Pulse Generator 3 channels CAN Interface Conforms to CAN Specification Version 2.0 Part A and B Automatic re-transmission in case of error Automatic transmission in response to Remote Frames Prioritized 16 message buffers for data and ID’s Supports mult