Single Junction Gull Wing Circulator

www.DataSheet4U.com Single Junction Gull Wing Circulator 902 MHz—928 MHz Features • • • • Designed for RFID market 22dB Isolation typical 0.25dB Insertion Loss Low cost package MAFRIN0461 Version 2 Description This circulator is designed specifically for RFID applications and features high reliability performance at a low cost. It is in a low cost package ideally suited for high volume manufacturing. M/A Com is one of the largest suppliers of isolator and circulators in the world. Electrical Specifications TA = +25°C, Z0 = 50 Ohms Parameter Frequency Range Insertion Loss Isolation Return Loss Circulation 1. See “Absolute Maximum Ratings” for Top. Test Conditions Over Top 1 1 1 1 Units MHz dB dB dB Min 902 Typ Max 928 902 MHz—928 MHz, over Top 902 MHz—928 MHz, over Top 0.21 22.0 21.0 29.0 28.0 CW 0.30 902 MHz—928 MHz, all ports, over Top Over Top 1 Absolute Maximum Ratings Parameter Forward Power Operating Temperature Storage Temperature 1. Operation of this device above any one of these parameters may cause permanent damage. Absolute Maximum 100 Watts -10°C to +85°C -40°C to +100°C 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Single Junction Gull Wing Circulator 902 MHz—928 MHz Ordering Information Part Number MAFRIN0461 Packaging Tray MAFRIN0461 Version 2 Environmental Specifications Devices are designed to function after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments. S-Parameters S-parameters are available on the M/A Com website at: S-Parameters Insertion Loss (S21) +25 C 0 -0.1 -10 C +85 C Isolation (S12) +25 C -20 -25 -10 C +85 C dB dB 902 905 908 912 915 918 922 925 928 -0.2 -0.3 -0.4 -0.5 -30 -35 -40 902 905 908 912 915 918 922 925 925 Frequency (MHz) Frequency (MHz) Return Loss (S11) +25 C -20 -30 -10 C +85 C Return Loss (S22) +25 C -20 -24 -10 C +85 C dB -50 -60 902 905 908 912 915 918 922 925 928 dB -40 -28 -32 -36 902 905 908 912 915 918 922 Frequency (MHz) Frequency (MHz) 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. 928 928 Single Junction Gull Wing Circulator 902 MHz—928 MHz Recommended PCB Layout Outline Drawing MAFRIN0461 Version 2 1. Dimensions in mm. 2. Tolerances: ± 0.2 mm unless otherwise noted. 3. Use multiple plated thru holes in ground area under the housing. 1. 2. 3. 4. 5. Dimensions in mm. Tolerances: ± 0.3 mm unless otherwise noted. Housing: Cold Rolled Steel with SnPb 90/10 plating. Cover: CRS with SnPb 90/10 plating. Leads: Copper. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.