Single Supply Dual Operational Amplifiers

www.DataSheet4U.com LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904 Single Supply Dual Operational Amplifiers Utilizing the circuit designs perfected for Quad Operational Amplifiers, these dual operational amplifiers feature low power drain, a common mode input voltage range extending to ground/VEE, and single supply or split supply operation. The LM358 series is equivalent to one−half of an LM324. These amplifiers have several distinct advantages over standard operational amplifier types in single supply applications. They can operate at supply voltages as low as 3.0 V or as high as 32 V, with quiescent currents about one−fifth of those associated with the MC1741 (on a per amplifier basis). The common mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. The output voltage range also includes the negative power supply voltage. Features http://onsemi.com PDIP−8 N, AN, VN SUFFIX CASE 626 1 SOIC−8 D, VD SUFFIX CASE 751 8 8 1 8 1 • • • • • • • • Short Circuit Protected Outputs True Differential Input Stage Single Supply Operation: 3.0 V to 32 V Low Input Bias Currents Internally Compensated Common Mode Range Extends to Negative Supply Single and Split Supply Operation ESD Clamps on the Inputs Increase Ruggedness of the Device without Affecting Operation • Pb−Free Packages are Available • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes Micro8] DMR2 SUFFIX CASE 846A PIN CONNECTIONS Output A Inputs A VEE/Gnd 1 2 8 7 − + 3 4 VCC Output B Inputs B − +5 6 (Top View) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 10 of this data sheet. DEVICE MARKING INFORMATION See general marking information in the device marking section on page 11 of this data sheet. © Semiconductor Components Industries, LLC, 2006 June, 2006 − Rev. 22 1 Publication Order Number: LM358/D LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904 3.0 V to VCC(max) VCC 1 2 VEE VCC 1 2 1.5 V to VEE(max) VEE/Gnd 1.5 V to VCC(max) Single Supply Figure 1. Split Supplies Output Q15 Q16 Q14 Q13 Q19 5.0 pF Q12 25 40 k Bias Circuitry Common to Both Amplifiers VCC Q22 Q24 Q23 Q18 Inputs Q20 Q11 Q9 Q17 Q2 Q3 Q4 Q21 Q6 Q5 Q8 Q26 Q10 2.0 k VEE/Gnd Q7 Q1 Q25 2.4 k Figure 2. Representative Schematic Diagram (One−Half of Circuit Shown) http://onsemi.com 2 LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904 MAXIMUM RATINGS (TA = +25°C, unless otherwise noted.) Rating Power Supply Voltages Single Supply Split Supplies Input Differential Voltage Range (Note 1) Input Common Mode Voltage Range (Note 2) Output Short Circuit Duration Junction Temperature Thermal Resistance, Junction−to−Air (Note 3) Case 846A Case 751 Case 626 Symbol VCC VCC, VEE VIDR VICR tSC TJ RqJA Value 32 ±16 ±32 −0.3 to 32 Continuous 150 238 212 161 −65 to +150 2000 200 −25 to +85 0 to +70 −40 to +105 −40 to +125 °C °C °C/W Vdc Vdc Unit Vdc Storage Temperature Range ESD Protection at any Pin Human Body Model Machine Model Operating Ambient Temperature Range LM258 LM358, LM358A LM2904/LM2904A LM2904V, NCV2904 (Note 4) Tstg Vesd °C V TA Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Split Power Supplies. 2. For supply voltages less than 32 V the absolute maximum input voltage is equal to the supply voltage. 3. All RqJA measurements made on evaluation board with 1 oz. copper traces of minimum pad size. All device outputs were active. 4. NCV2904 is qualified for automotive use. http://onsemi.com 3 LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904 ELECTRICAL CHARACTERISTICS (VCC = 5.0 V, VEE = GND, TA = 25°C, unless otherwise noted.) LM258 Characteristic Input Offset Voltage VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO ] 1.4 V, RS = 0 W TA = 25°C TA = Thigh (Note 5) TA = Tlow (Note 5) Average Temperature Coefficient of Input Offset Voltage TA = Thigh to Tlow (Note 5) Input Offset Current TA = Thigh to Tlow (Note 5) Input Bias Current TA = Thigh to Tlow (Note 5) Average Temperature Coefficient of Input Offset Current TA = Thigh to Tlow (Note 5) Input Common Mode Voltage Range (Note 6), VCC = 30 V VCC = 30 V, TA = Thigh to Tlow Differential Input Voltage Range Large Signal Open Loop Voltage Gain RL = 2.0 kW, VCC = 15 V, For Large VO Swing, TA = Thigh to Tlow (Note 5) Channel Separation 1.0 kHz ≤ f ≤ 20 kHz, Input Referenced Common Mode Rejection RS ≤ 10 kW Power Supply Rejection Output Voltage−High Limit TA = Thigh to Tlow (Note 5) VCC = 5.0 V, RL = 2.0 kW, TA = 25°C VCC = 30 V, RL = 2.0 kW VCC = 30 V, RL = 10 kW Output Voltage−Low Limit VCC = 5.0 V, RL = 10 kW, TA = Thigh to Tlow (Note 5) Output Source Current VID = +1.0 V, VCC = 15 V TA = Thigh to Tlow (LM358A Only) Output Sink Current VID = −1.0 V, VCC = 15 V TA = Thigh to Tlow (LM358A Only) VID = −1.0 V, VO = 200 mV Output Short Circuit to Ground (Note 7) Power Supply Current (Total Device) TA = Thigh to Tlow (Note 5) VCC = 30 V, VO = 0 V, RL = ∞ VCC = 5 V, VO = 0 V, RL = ∞ Symbol VIO − − − DVIO/DT − 2.0 − − 7.0 5.0 7.0 7.0 − − − − − 2.0 − − 7.0 7.0 9.0 9.0 − − − − − 2.0 − − 7.0 3.0 5.0 5.0 − mV/°C Min Typ Max Min LM358 Typ Max Min LM358A Typ Max Unit mV IIO IIB DIIO/DT − − − − − 3.0 − −45 −50 10 30 100 −150 −300 − − − − − − 5.0 − −45 −50 10 50 150 −250 −500 − − − − − − 5.0 − −45 −50 10 30 75 −100 −200 − nA pA/°C VICR 0 0 − − − 100 − −120 85 28.3 28 VCC − − − − 0 0 − 25 15 − 65 − − − 100 − −120 70 28.3 28 VCC − − − − 0 0 − 25 15 − 65 − − − 100 − −120 70 28.5 28 VCC − − − − V VIDR AVOL − 50 25 − 70 V V/mV CS CMR dB dB PSR VOH 65 100 − 65 100 − 65 100 − dB V 3.3 26 27 VOL − 3.5 − 28 5.0 − − − 20 3.3 26 27 − 3.5 − 28 5.0 − − − 20 3.3 26 27 − 3.5 − 28 5.0 − − − 20 mV IO + mA 20 40 − 20 40 − 20 10 10 5.0 12 − 40 − 20 − 50 40 − − − − − 60 mA mA mA mA mA − − 1.5 0.7 3.0 1.2 − − 1.5 0.7 3.0 1.2 − − 1.5 0.7 2.0 1.2 IO − 10 12 20 50 40 − − 60 10 12 − 20 50 40 − − 60 ISC ICC − 5. LM258: Tlow = −25°C, Thigh = +85°C LM358, LM358A: Tlow = 0°C, Thigh = +70°C LM2904V & NCV2904: Tlow = −40°C, Thigh = +125°C LM2904/LM2904A: Tlow = −40°C, Thigh = +105°C NCV2904 is qualified for automotive use. 6. The input common mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of the common mode voltage range is VCC − 1.7 V. 7. Short circuits from the output to VCC can cause excessive heating and eventual destruction. Destructive dissipation can result from simultaneous shorts on all amplifiers. http://onsemi.com 4 LM258, LM358, LM358A, LM2904, LM2904A, LM2904V, NCV2904 ELECTRICAL CHARACTERISTICS (VCC = 5.0 V, VEE = Gnd, TA = 25°C, unless otherwise noted.) LM2904 Characteristic Input Offset Voltage VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO ] 1.4 V, RS = 0 W TA = 25°C TA = Thigh (Note 8) TA = Tlow (Note 8) Average Temperature Coefficient of Input Offset Voltage TA = Thigh to Tlow (Note 8) Input Offset Current TA = Thigh to Tlow (Note 8) Input Bias Current TA = Thigh to Tlow (Note 8) Average Temperature Coefficient of Input Offset Current TA = Thigh to Tlow (Note 8) Input Common Mode Voltage Range (Note 9), VCC = 30 V VCC = 30 V, TA = Thigh to Tlow Differential Input Voltage Range Large Signal Open Loop Voltage Gain RL = 2.0 kW, VCC = 15 V, For Large VO Swing, TA = Thigh to Tlow (Note 8) Channel Separation 1.0 kHz ≤ f ≤ 20 kHz, Input Referenced Common Mode Rejection RS ≤ 10 kW Power Supply Rejection Output Voltage−High Limit TA = Thigh to Tlow (Note 8) VCC = 5.0 V, RL = 2.0 kW, TA = 25°C VCC = 30 V, RL = 2.0 kW VCC = 30 V, RL = 10 kW Output Voltage−Low Limit VCC = 5.0 V, RL = 10 kW, TA = Thigh to Tlow (Note 8) Output Source Current VID = +1.0 V, VCC = 15 V Output Sink Current VID = −1.0 V, VCC = 15 V VID = −1.0 V, VO = 200 mV Output Short Circuit to Ground (Note 10) Power Supply Current (Total Device) TA = Thigh to Tlow (Note 8) VCC = 30 V, VO = 0 V, RL = ∞ VCC = 5 V, VO = 0 V, RL = ∞ Symbol VIO − − − DVIO/DT − 2.0 − − 7.0 7.0 10 10 − − − − − 2.0 − − 7.0 7.0 10 10 − − − − − − − − 7.0 7.0 13 10 − mV/°C Min Typ Max Min LM2904A Typ Max LM2904V, NCV2904 Min Typ Max Unit mV IIO IIB DIIO/DT − − − − − 5.0 45 −45 −50 10 50 200 −250 −500 − − − − − − 5.0 45 −45 −50 10 50 200 −100 −250 − − − − − − 5.0 45 −45 −50 10 50 200 −250 −500 − nA pA/°C VICR 0 0 − − − 100 − −120 70 24.3 24 VCC − − − − 0 0 − 25 15 − 50 − − − 100 − −120 70 24.3 24 VCC − − − − 0 0 − 25 15 − 50 − − − 100 − −120 70 24.3 24 VCC − − − − V VIDR AVOL − 25 15 − 50 V V/mV CS CMR dB dB PSR VOH 50 100 − 50 100 − 50 100 − dB V 3.3 22 23 VOL − 3.5 − 24 5.0 − − − 20 3.3 22 23 − 3.5 − 24 5.0 − − − 20 3.3 22 23 − 3.5 − 24 5.0 − − − 20 mV IO + IO − 20 40 − 20 40 − 20 40 − mA 10 − − 20 − 40 − − 60 10 − − 20 − 40 − − 60 10 − − 20 − 40 − − 60 mA mA mA mA ISC ICC − − 1.5 0.7 3.0 1.2 − − 1.5 0.7 3.0 1.2 − − 1.5 0.7 3.0 1.2 8. LM258: Tlow = −25°C, Thigh = +85°C LM358, LM358A: Tlow = 0°C, Thigh = +70°C LM2904V & NCV2904: Tlow = −40°C, Thigh