VIF/SIF/Y/Deflection 1 Chip IC

Ordering number : ENA0252 LA76810A Overview Monolithic Linear IC For PAL/NTSC Color Television Sets VIF/SIF/Y/Deflection 1chip IC LA76810A is a VIF/SIF/Y/Deflection 1chip IC for PAL/NTSC color television sets. Functions • VIF/SIF/Y/Deflection Implemented in a 1chip. • I2C Bus Control Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Symbol V8 max V31 max V43 max Maximum supply current I18 max I25 max Allowable power dissipation Operating temperature Storage temperature Pd max Topg Tstg 3 Conditions Ratings 7.0 7.0 7.0 25 35 Unit V V V mA mA W °C °C Ta ≤ 65°C * www.DataSheet4U.com 1.6 -10 to +65 -55 to +150 * Provided with a glass epoxy board (114.3×76.1×1.6 mm ) Operating Conditions at Ta = 25°C Parameter Recommended supply voltage Symbol V8 V31 V43 Recommended supply current I18 I25 Operating supply voltage range V8 op V31 op V43 op Operating supply current range I25 op I18 op Conditions Ratings 5.0 5.0 5.0 19 27 4.7 to 5.3 4.7 to 5.3 4.7 to 5.3 24 to 30 17 to 21 Unit V V V mA mA V V V mA mA ■ Any and all SANYO Semiconductor products described or contained herein do not have specifications ■ SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before using any SANYO Semiconductor products described or contained herein in such applications. N2206 MS PC B8-4814 No.A0252-1/43 LA76810A Electrical Characteristics Ta = 25°C, VCCL = V8 = V31 = V43 = 5.0V, ICC = I18 = 19mA, ICC = I25 = 27mA Parameter [Circuit voltage, current] IF supply current RGB supply voltage Horizontal supply voltage CCD supply current Video supply current [CCD block] Voltage gain R Voltage gain B Difference of voltage gain Delay time [OSD block] OSD Fast SW threshold FSTH ROSDH GOSDH BOSDH RRGB LRRGB GRGB LGRGB BRGB LBRGB www.DataSheet4U.com Symbol Conditions Ratings min typ max Unit I8 V18 V25 I31 I43 GV_R GV_B DGV Td V8 = 5V, V3 = 2.5V I18 = 19mA I25 = 27mA I31 = 5V I43 = 5V -2 -2 0 65.0 8.0 5.0 5.6 124.0 mA V V mA mA 0 0 0.1 63.8 2 2 0.3 dB dB dB µs 1.7 120 70 85 1.12 45 0.8 45 0.8 45 1.9 165 120 120 1.4 50 1 50 1.0 50 2.2 200 140 155 1.68 60 1.2 60 1.2 60 V IRE IRE IRE Ratio % Ratio % Ratio % Red RGB output level Green RGB output level Blue RGB output level Analog OSD R output level Gain match Linearity Analog OSD G output level Gain match Linearity Analog OSD B output level Gain Match Linearity [RGB output (cutoff drive) block] Brightness control (Normal) Hi brightness (max) Low brightness (min) Cutoff control (min) (Bias control) (max) Resolution Sub-bias control Resolution Drive adjustment Maximum output output Output attenuation [VIF block] Maximum RFAGC voltage Minimum RFAGC voltage RF AGC Delay Pt (@DAC = 0) RF AGC Delay Pt (@DAC = 63) Input sensitivity No-signal video output voltage Sync signal tip level Video output amplitude Video S/N C-S beat level Differential gain Differential phase Maximum AFT output voltage BRT64 BRT127 BRT0 Vbias0 Vbias255 Vbiassns Vsbiassns Rbout63 RBout0 1.7 15 -25 1.6 2.6 2 20 -20 2 3 4 7 2.5 2.4 25 -15 2.4 3.4 V IRE IRE V V mV/Bit mV/Bit Vp-p 7 9 11 dB VRFH VRFL RFAGC0 RFAGC63 Vi VOn VOtip VO S/N IC-S DG DP VAFTH CW = 80dBµ, DAC = 0 CW = 80dBµ, DAC = 63 DAC = 0 DAC = 63 Output-3db No signal CW = 80dBµ 80dBµ, AM = 78%, fm = 15kHz CW = 80dBµ V4.43MHz/V1.07MHz 80dBµ, 87.5% Video MOD 80dBµ, 87.5% Video MOD CW = 80dBµ, frequency variations 8.5 0 85 9 0.3 0.7 Vdc Vdc dBµ 75 46 dBµ dBµ Vdc Vdc Vp-p dB dB 10.0 10.0 5 % deg Vdc 3.1 0.9 1.9 3.5 1.2 2.0 45 30 5.0 2.0 3.9 1.5 2.1 4.3 4.7 Continued on next page. No.A0252-2/43 LA76810A Continued from preceding page. Parameter Minimum AFT output voltage AFT detection sensitivity APC pull-in range (U) APC pull-in range (L) NT Trap1 (4.5MHz) NT Trap2 (4.8MHz) BG Trap1 (5.5MHz) BG Trap2 (5.85MHz) I Trap1 (6.0MHz) I Trap2 (6.55MHz) DK Trap1 (6.5MHz) NT Group Delay1 (3.5MHz) NT Group Delay2 (4.0MHz) BG Group Delay1 (4.0MHz) BG Group Delay2 (4.4MHz) I Group Delay1 (4.0MHz) I Group Delay2 (4.4MHz) DK Group Delay1 (4.0MHz) DK Group Delay2 (4.4MHz) [SIF block] FM detection output voltage FM limiting sensitivity FM detection output f characteristics FM detection output distortion AM rejection ratio SIF S/N PAL de-emph time constant PAL/NT difference of voltage gain TN de-emph time constant BPF 3dB band width [AUDIO block] Maximum gain Variable range Frequency characteristics Mute Distortion S/N Crosstalk [Video SW block] Video signal input 1DC voltage Video signal input 1AC voltage Video signal input 2DC voltage Video signal input 2AC voltage SVO terminal DC voltage SVO terminal AC voltage [Filter block] Chroma trap amount NTSC Chroma trap amount PAL C-BPF1A (3.93MHz) CtrapN CtrapP CBPF1A Reference: 4.43MHz FILTER SYS = 0010 Continued on next page. -36.0 -36.0 -6.0 -26.0 -26.0 -3.0 -22.0 -22.0 0.0 dB dB dB VIN1DC VIN1AC VIN2DC VIN2AC SVODC SVOAC 1.7 1.7 2.2 2.2 2.5 1 2.5 1 2 2 2.3 2.3 2.8 2.8 V Vp-p V Vp-p V Vp-p AGMAX ARANGE AF AMUTE ATHD ASN ACT 20kHz 20kHz 1kHz, 500mVrms, Vol: MAX DIN.Audio 20kHz 65 70 70 1kHz -2.5 60 -3.0 70 0.0 65 3.0 0.5 2.5 dB dB dB dB % dB dB STHD SAMR SSN SPTC SGD SNTC SBW FM = ±30kHz AM = 30% DIN.Andio www.DataSheet4U.com Symbol VAFTL VAFTS fPU fPL NTR1 NTR2 BTR1 BTR2 ITR1 ITR2 DTR1 NGD1 NGD2 BGD1 BGD2 IGD1 IGD2 DGD1 DGD2 for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz for 1MHz Conditions CW = 80dBµ, frequency variations CW = 80dBµ, frequency variations Ratings min 0.0 12.0 1.0 1.0 -35 -20 -35 -20 -35 -20 -35 200 700 100 200 50 90 30 40 typ 0.2 20.0 max 0.7 28.0 Unit Vdc mV/kHz MHz MHz dB dB dB dB dB dB dB ns ns ns ns ns ns ns ns SOADJ SLS SF Output -3dB fm = 100kHz 580 600 620 61 mVrms dBµ dB % dB dB -0.5 6.0 9.0 1.0 40 50 3.0 0.0 3.0 3.0 dB dB dB dB No.A0252-3/43 LA76810A Continued from preceding page. Parameter C-BPF1B (4.73/4.13MHz) C-BPF1C (4.93/3.93MHz) C-BPF2A (3.93MHz) C-BPF2B (4.73/4.13MHz) C-BPF2C (4.93/3.93MHz) Y-DL TIME1 S-VHS Y-DL TIME2 PAL Y-DL TIME3 NTSC Y-DL TIME4 SECAM [Video block] Video overall gain (Contrast max) Contrast adjustment Characteristics Contrast adjustment Characteristics Sharpness variability range Maximum black stretch gain Black stretch threshold (60IRE ∆black) DC transmission amount Horizontal/vertical blanking output level Video frequency characteristics 1 S-VHS Video frequency characteristics 2 PAL Video frequency characteristics 3 NTSC Video frequency characteristics 4 SECAM [Chroma block]: PAL/NTSC common B-Y/Y amplitude ratio Color control characteristics 1 Color control characteristics 2 Color control sensitivity fsc output label Residual higher harmonic level B Residual higher harmonic level R Residual higher harmonic level G Continued on next page. E_CAR_G 300 mVp-p E_CAR_R 300 mVp-p CLRBY CLRMN CLRMM CLRSE FSC37 E_CAR_B Color MAX/CEN Color MAX/MIN 75 1.6 33 1 100 2.0 40 2 200 300 150 2.4 50 4 % deg dB %/bit mVp-p mVp-p BW4 3.1MHz/100kHz -6.0 -3.0 0.0 dB BW3 2.6MHz/100kHz -6.0 -3.0 0.0 dB BW2 3.2MHz/100kHz -6.0 -3.0 0.0 dB BW1 6.0MHz/100kHz -6.0 -3.0 0.0 dB ClampG RGBBLK www.DataSheet4U.com Symbol CBPF1B CBPF1C CBPF2A CBPF2B CBPF2C TdY1 TdY2 TdY3 TdY4 Conditions Reference: 4.13MHz FILTER SYS = 0010 Reference: 3.93MHz FILTER SYS = 0010 Reference: 4.43MHz FILTER SYS = 0011 Reference: 4.13MHz FILTER SYS = 0011 Reference: 3.93MHz FILTER SYS = 0011 FILTER SYS = 0100 FILTER SYS = 0010 FILTER SYS = 0001 FILTER SYS = 1000 Ratings min -0.5 6.0 -4.0 -2.0 -2.5 300.0 490.0 530.0 630.0 typ 1.5 4.0 -1.0 0.0 0.0 350.0 540.0 580.0 680.0 max 3.5 1 0.0 2.0 2.5 400.0 590.0 630.0 730.0 Unit dB dB dB dB dB ns ns ns ns CONT127 CONT63 (Normal/max) CONT0 (Min/max) (Normal) (max) (min) Sharp31 Sharp63 Sharp0 BKSTmax BKSTTH FILTER SYS = 0000 FILTER SYS = 0000 FILTER SYS = 0000 9.0 -7.5 -15.0 6.0 9.0 -4.0 20.0 -5.0 95.0 0.1 11.0 -6.0 -12.0 9.0 12.0 -1.0 25.0 0.0 100.0 0.4 13.0 -4.5 -9.0 12.0 15.0 2.0 30.0 5.0 105.0 0.7 dB dB dB dB dB dB IRE IRE % V No.A0252-4/43 LA76810A Continued from preceding page. Parameter [Chroma block]: PAL ACC amplitude characteristics 1 ACC amplitude characteristics 2 Demodulation output ratio R-Y/B-Y: PAL Demodulation output ratio G-Y/B-Y: PAL Demodulation output ratio G-Y/R-Y: PAL Demodulation angle R-Y/B-Y: PAL Killer operating point APC pull-in range (+) APC pull-in range (-) [Chroma block]: NTSC ACC amplitude characteristics 1 ACC amplitude characteristics 2 Demodulation output ratio R-Y/B-Y: NTSC Demodulation output ratio G-Y/B-Y: NTSC Demodulation angle B-Y/R-Y: NTSC Demodulation angle G-Y/B-Y: NTSC Killer operating point APC pull-in range (+) APC pull-in range (-) Tint center Tint variable range (+) Tint variable range (-) [Deflection block] Horizontal free-running frequency Horizontal pull-in range Horizontal output pulse width Horizontal output pulse saturation voltage Vertical free-running cycle 50 Vertical free-running cycle 60 Horizontal output pulse phase Horizontal output pulse phase Horizontal position adjustment range Horizontal position adjustment maximum variability width POR circuit operating voltage Horizontal blanking left @0 Horizontal blanking left @7 Horizontal blanking right @0 Horizontal blanking right @7 Sand castle pulse crest value H Sand castle pulse crest value M1 Sand castle pulse crest value L SANDL 0.1 0.4 0.7 V VPOR BLKL0 BLKL7 BLKR0 BLKR7 SANDH SANDM1 BLKL: