Uncooled DFB Laser

Data Sheet March 2003 L192-Type OC-192/STM-64 1310 nm Uncooled DFB Laser with Integrated Driver Features www.DataSheet4U.com ■ OPT OEL ECTR ® ONIC S, IN C Data rates from 9.95 Gb/s to 10.7 Gb/s Integrated driver 1310 nm wavelength DFB laser No TEC required SDH STM-64 VSR600-2R1 and VSR2000-2R1 compliant Transmission distances up to 40 km Single-mode fiber pigtail with SC, FC, ST, or LC optical connector Operating case temperature range: 0 °C to 70 °C 50 Ω differential data input Package options: — Space-sensitive package without mounting bracket (ideal for transponder and transceiver applications) — With mounting bracket TriQu int L192 . ■ ■ ■ ■ ■ ■ Featuring a 1310 nm DFB laser and integrated driver, the L192type is manufactured in a compact, 16-pin butterfly package (above), and is also available with a convenient mounting bracket (below). ■ ■ ■ OP TO ELE CT RO NIC ® S, IN C TriQ uin t L19 2 Applications ■ ■ Line terminal equipment SONET/SDH OC-192/STM-64 transponders and transceivers High-speed networks up to 10.7 Gb/s SONET/SDH OC-192/STM-64 telecommunications applications ■ ■ L192-Type OC-192/STM-64 1310 nm Uncooled DFB Laser with Integrated Driver Data Sheet March 2003 Description Laser Operation The L192-type 10 Gb/s laser consists of a 1310 nm, isolated, MQW DFB laser and laser driver in a pigtailed, butterfly, metal package. It is designed for use in single-mode, high-speed telecommunication applications at the SONET OC-192 and the ITU-T SDH STM-64 data rate of 9.95328 Gb/s. At 10 Gb/s, the typical room temperature output power is –2 dBm with an extinction ratio of 7 dB. The operatwww.DataSheet4U.com ing case temperature range for the device is 0 °C to 70 °C. The laser is manufactured in a compact, 16-pin butterfly package with a single-mode optical fiber pigtail. The fiber pigtail is internally beveled for low return loss and is available with SC, FC, ST, or LC optical connectors. The DATA and DATA inputs must be ac coupled to prevent any dc offset from entering the device. Pin Information Table 1. Pin Descriptions Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Name VCC Temperature Sensor Back-facet Monitor Current Laser Bias VEE Reference VEE RF Ground DATA DATA I/O I O O I O I I I I I I I I I O I RF Ground NUC1 Pulse Width P (PWP) Pulse Width N (PWN) Mod Enable Mod Monitor Mod Control 1. No user connection. Future clock-select function. Block Diagram VEE 6 VEEREF 5 RF CHOKE GND DATA DATA GND 11 NC FUTURE CLOCK SELECT, IF REQUIRED 12 PWP 13 PWN 14 15 16 LASER DRIVER LASER IBIAS 4 IBF 3 VTEMP 2 TEMP SENSOR VCC 1 BACKFACE DIODE MOD_MON MOD_ENA MOD_CTRL 2 For additional information and latest specifications, see our website: www.triquint.com Data Sheet March 2003 L192-Type OC-192/STM-64 1310 nm Uncooled DFB Laser with Integrated Driver Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations section of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Operating Case Temperature Range Storage Temperature Range Supply : Positive Supply www.DataSheet4U.com Negative Supply Laser Diode Reverse Voltage Laser Diode Forward Current Optical Output Power Monitor Diode Reverse Voltage Monitor Diode Forward Current Data Input Voltage Pulse Width Inputs Lead Soldering Temperature Lead Soldering Time Relative Humidity Minimal Fiber Bend Radius (ac)2 Modulation Current Control Voltage Voltages1 Symbol TC Tstg VCC VEE — — PMAX — — — — PWP/PWN — — RH — Min 0 –40 — –5.5 — — — — — — — VEE — — — — Max 70 85 5.5 — 0 150 10 20 2 1 240 VEE + 2 250 10 85 1 Unit °C °C V V V mA mW V mA V mV V °C s % In. 1. When VEE is connected to –5.2 V, VCC must be at 0 V; when VCC is connected to 5.0 V, VEE must be at 0 V. 2. Data Inputs must be ac coupled For additional information and latest specifications, see our website: www.triquint.com 3 L192-Type OC-192/STM-64 1310 nm Uncooled DFB Laser with Integrated Driver Data Sheet March 2003 Optical and Electrical Characteristics Table 2. Optical and Electrical Characteristics (Minimum and maximum values are over operating temperature range and end of life. Typical values are at room temperature and beginning of life unless otherwise specified.) Parameter dc Power Supply Voltages: Negative Supply Positive Supply dc Power Supply Currents: Negative Supply w w w . D a t Positive Supplyc o m aSheet4U. Laser Threshold Current Average Optical Output Power Back-facet Monitor Current Back-facet Monitor Dark Current Back-facet Monitor Capacitance Tracking Error 1 Laser Modulation Voltage Laser Bias Current Peak Wavelength Wavelength Shift with Temperature Side-mode Suppression Ratio Spectral Width Extinction Ratio Dispersion Penalty 2 Rise/Fall Time Data Input Voltage: Single-ended Differential Data Input Impedance Data Input Return Loss Optical Return Loss Optical Isolation Laser Temperature Symbol VEE VCC — IEE ICC ITH PO IBF ID CBF TE VMOD IBIAS λ λ∆T SMSR λ20 ER DP tR/tF VIN 25 °C 0 °C to 70 °C ER = 7.5 dB VR = 5 V VR = 5 V VR = 5 V — 25 °C, ER = 7.5 dB 0 °C to 70 °C, ER = 7.5 dB 25 °C, ER = 7.5 dB 0 °C to 70 °C, ER = 7.5 dB — — — 20 dB down from peak — 12 km max, G.652 Unfiltered, 20%—80% — 800 400 RIN S11 Condition — Min –5.5 4.75 130 130 — 2 –6 100 — — — 90 90 13 6 1290 — 30 — 6 — — Typ –5.2 5 180 180 9 — –2 — 10 — — 140 — 25 — — 0.09 — — 7 — — 900 500 50 — — — — (VTEMP3 – 500 mV)/10 Max –4.9 5.25 260 260 — 50 –1 2000 200 25 ±1.25 180 230 35 85 1330 0.1 — 1 — 1 50 1000 1000 — — — — — — Unit V V mA mA mA mA dBm µA nA pF dB mV mV mA mA nm nm/°C dB nm dB dB ps mV mV Ω dB dB dB dB °C — Up to 8 GHz Up to 10 GHz — — — — 10 6 30 20 — S22 IS TLASER 1. VTEMP is the voltage measured on pin 2. 2. Can meet dispersion penalty at longer fiber links. Please contact TriQuint for additional information. 3. VTEMP is the voltage measured on pin 2. 4 For additional information and latest specifications, see our website: www.triquint.com Data Sheet March 2003 L192-Type OC-192/STM-64 1310 nm Uncooled DFB Laser with Integrated Driver Outline Diagrams Outline Drawing, Package Style A Dimensions are in inches and (millimeters). A 0.611 (15.51) 0.037 (0.95) 6 0.375 (9.53) 1 ∅ 4 x 0.087(2.20) www.DataSheet4U.com 0.050 (1.27) 1.017 (25.83) 1.174 (29.82) 7 10 0.260 (6.60) 0.500 (12.70) DETAIL “B” 0.079 (2.00) 0.333 (8.45) 0.097 (2.46) 11 0.608 (15.45) 0.797 (20.25) A 16 0.050 (1.27) 0.025 (0.64) 0.008 (0.20) 0.272 (6.90) 0.125 (3.18) 0.016 (0.40) DETAIL B 1-1237(F)x 0.150 (3.80) 2.010 REF. (51.05) For additional information and latest specifications, see our website: www.triquint.com 5 L192-Type OC-192/STM-64 1310 nm Uncooled DFB Laser with Integrated Driver Data Sheet March 2003 Outline Diagrams (continued) Outline Drawing, Package Style N Dimensions are in inches and (millimeters). A 0.020 (0.51) 6 0.050 (1.27) 7 1 0.050 (1.27) www.DataSheet4U.com 0.606 0.500 (15.38) (12.70) 10 0.175 (4.44) 0.087 (2.22) 11 A 16 0.260 (6.60) 1.135 (28.84) 0.569 (14.45) 0.611 (15.51) 0.004 (0.100) 0.272 (6.90) 0.354 (9.00) 0.611 (15.51) 0.157 (4.00) 0.354 (9.00) 0.170 (4.32) 0.146 (3.70) 0.037 (0.95) 0.125 (3.18) 0.063 (1.59) 0.013 (0.32) 2 x 0.008 (0.20) 0.276 (7.00) 0.315 (8.00) 0.025 (0.64) 2 x 0.016 (0.40) 6 For additional information and latest specifications, see our website: www.triquint.com Data Sheet March 2003 L192-Type OC-192/STM-64 1310 nm Uncooled DFB Laser with Integrated Driver Electrostatic Discharge CAUTION: This device is susceptible to damage as a result of electrostatic discharge. Take proper precautions during both handling and testing. Follow guidelines such as JEDEC Publication No. 108-A (Dec. 1988). TriQuint employs a human-body model (HBM) for ESD-susceptibility testing and protection-design evaluation. ESD voltage thresholds are dependent on the critical parameters used to define the model. A standard HBM (resistance = 1.5 kΩ, capacitance = 100 pF) is widely used and can be used for comparison purposes. The HBM ESD withstand voltage established for the L192 is 100 V. Laser Safety Information www.DataSheet4U.com Class IIIb Laser Product FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser Safety requirements. All versions are classified Class 3B laser products consistent with IEC ® 60825-1: 1993. This device family has been classified with the FDA under an accession number to be determined. Measurements were made to classify the product per IEC 60825-1: 1993. This product complies with 21 CFR 1040.10 and 1040.11. Single-mode fiber pigtail Wavelength = 1310 nm Maximum power = 10 mW Because of size constraints, laser safety labeling (including an FDA Class IIIb label) is not affixed to the module but attached to the outside of the shipping carton. Product is not shipped with power supply. Caution: Use of controls, adjustments, and procedures other than those specified herein may result in hazardous laser radiation exposure. DANGER INVISIBLE LASER RADIATION IS EMITTED FROM THE END OF FIBER OR CONNECTOR Avoid direct exposure to beam Do not view beam directly with optical instruments INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR Avoid exposure to beam Class IIIb Laser Product per CDRH, 21 CFR 1040 Max. Output: 10 mW Wavelength:1.3 µm For additional information and latest specifications, see our website: www.triquint.com 7 L192-Type OC-192/STM-64 1310 nm Uncooled DFB Laser with Integrated Driver Data Sheet March 2003 Ordering Inf