KBP005M/3N246 - KBP10M/3N252
KBP005M/3N246 - KBP10M/3N252
0.125 X 45O (3.2) Typ 0.600 (15.2) 0.560 (14.3)
Features • Surge overload rating: 50 amperes
peak.
0.460 (11.7) 0.420 (10.7) 0.500 (12.7) 0.460 (11.7)
+
~
~
0.500 Min (12.7)
• Reliable low cost construction utilizing
molded plastic technique.
KBPM
0.600 Min (15.2)
1.5 Ampere Bridge Rectifiers
Absolute Maximum Ratings*
Symbol
IO if(surge) PD RqJA Tstg TJ Average Rectified Current @ TA = 50°C Peak Forward Surge Current Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg Storage Te mperature Range Operating Junction Tem perature
TA = 25°C unless otherwise noted
0.060 Typ (1.52)
0.160 (4.1) 0.140 (3.6)
0.034 (8.6) 0.028 (7.6)
Dimensions are in: inches (mm)
Parameter
Value
1.5 50 3.5 25 40 -55 to +165 -55 to +165
Units
A A W mW/°C °C/W °C °C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.47 x 0.47" (12 x 12 mm).
Electrical Characteristics
Parameter
TA = 25°C unless otherwise noted
Device
005M 246 01M 247 100 70 100 02M 248 200 140 200 04M 249 400 280 400 5.0 500 1.0 1.3 10 15 06M 250 600 420 600 08M 251 800 560 800 10M 252 1000 700 1000
Units
Peak Repetitive Reverse Voltage Maximum RMS Bridge Input Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, total bridge @ rated VR TA = 25°C TA = 100°C Maximum Forward Voltage Drop, per bridge @ 1.0 A @ 3.14 A 2 I t rating for fusing t < 8.35 ms Typi cal Junction Capacitance, per leg VR = 4.0 V, f = 1.0 MHz
50 35 50
V V V mA mA V V 2 A Sec pF
ã1998 Fairchild Semiconductor Corporation
KBP005M/3N246-KBP10M/3N252, Rev. A
KBP005M/3N246 - KBP10M/3N252
Bridge Rectifiers
(continued)
Typical Characteristics
Output Current vs. Ambient Temperature
2
Forward Characteristics
5 FORWARD CURRENT (A)
TYPICAL DISTRIBUTION
OUTPUT CURRENT (A)
1.5
1
1
MEDIAN
0.1
0.5
0
0
50 100 150 AMBIENT TEMPERATURE ( º C)
0.01
0
0.2
0.4 0.6 0.8 1 FORWARD VOLTAGE (V)
1.2
1.4
Reverse Characteristics
100 FORWARD SURGE CURRENT (A) REVERSE CURRENT ( µ A) 50
Non-Repetitive Surge Current
40
10
30
1
TA = 25º C
20
10
0.1
0
20 40 60 80 100 120 NORMALIZED REVERSE VOLTAGE (%)
140
0
1
2
5 10 20 50 NUMBER OF CYCLES AT 60Hz
100
KBP005M/3N246-KBP10M/3N252, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™
DISCLAIMER
ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
