(KBL005 - KBL10) 4.0 Ampere Silicon Bridge Rectifiers

KBL005 - KBL10 Discrete POWER & Signal Technologies KBL005 - KBL10 0.77(19.6) 0.73(18.5) 0.255(6.48) 0.245(6.22) Features • Ideal for printed circuit board . • Reliable low cost construction. • High surge current capability. KBL + ~ ~ – 0.645(16.38) 0.605(15.37) 1.0(25.4) MIN 1.1(27.9) MIN 0.08(2.0) 0.06(1.52) 0.052(1.32) 0.048(1.22) 0.210(5.33) 0.190(4.83) 4.0 Ampere Silicon Bridge Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) TA = 25°C unless otherwise noted Dimensions are in: inches (mm) Parameter Average Rectified Current @ TA = 40°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg Thermal Resistance, Junction to Lead,** per leg Storage Temperature Range Operating Junction Temperature Value 4.0 Units A 200 6.58 53 19 2.4 -55 to +150 -55 to +150 A W mW/°C °C/W °C/W °C °C PD RθJA RθJL Tstg TJ *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.375 " (9.5 mm) lead length and 0.5 x 0.5" (13 x 13 mm) copper pads. Electrical Characteristics Parameter 005 Peak Repetitive Reverse Voltage Maximum RMS Bridge Input Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, total bridge @ rated VR TA = 25°C TA = 100°C Maximum Forward Voltage Drop, per bridge @ 4.0 A 50 35 50 TA = 25°C unless otherwise noted Device 01 100 70 100 02 200 140 200 04 400 280 400 5.0 500 1.1 06 600 420 600 08 800 560 800 10 1000 700 1000 Units V V V µA µA V ©1999 Fairchild Semiconductor Corporation KBL005-KBL10, Rev. A KBL005 - KBL10 Silicon Bridge Rectifiers (continued) Typical Characteristics Non-Repetitive Surge Current 200 FORWARD SURGE CURRENT (A) FORWARD CURRENT (A) 5 Forward Current Derating Curve 4 3 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" 9.0 mm LEAD LENGTHS 100 2 1 0 0 1 10 100 NUMBER OF CYCLES AT 60Hz 1000 0 50 100 AMBIENT TEMPERATURE ( º C) 150 Forward Characteristics 10 REVERSE CURRENT (µ A) FORWARD CURRENT (A) 10 Reverse Characteristics 1 1 T A= 100º C 0.1 TJ = 25º C A Pulse Width = 200µS 300µS 2% Duty Cycle 0.1 T A= 25º C 0.01 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) KBL005-KBL10, Rev. A