PCB Mounttablle AC/DC Swiittchiing Powerr Supplly

www.DataSheet4U.com KB6 6 W att Single and Dual Output, PCB Mountable AC/DC Switching Power Supply ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load. INPUT SPECIFICATIONS Input Voltage.............................................. AC 85V-264V Input Frequency.......................................... 47-63 Hz Input Current............................................... Vin= 115v 0.11A Vin= 230v 0.07A Inrush Current............................................. Vin= 100v 7A Vin= 230v 16A OUTPUT SPECIFICATIONS Output Voltage............................................ See Chart Output Adjustment...................................... No Adjustment Efficiency..................................................... 70~75% Over-Voltage Protection.............................. N/A Over-Current Protection.............................. Automatic Recovery (105% min) Ripple and Noise......................................... 80 mVp-p (typ.) Hold-Up Time.............................................. Vin= 100v 14mSec Vin= 230v 130mSec Line/Load Regulation.................................. lo=0~100% @ 1% Rise Time.................................................... Vin= 100v 170mSec Vin= 230v 170mSec Leakage Current......................................... Vin= 100v 0.03 m RMS Vin= 230v 0.05 m RMS FEATURES PCB MOUNTABLE SUPER SMALL SIZE HIGH POWER DENSITY UNIVERSAL INPUT / “CE-MARK” HIGH RELIABILITY OVERCURRENT PROTECTION TWO YEAR WARRANTY GENERAL SPECIFICATIONS Switching Frequency................................... 100 KHz Typ MTBF.......................................................... >200,000 Hours Typ Isolation Voltage Primary to Secondary............... 3000 VAC Primary to Case........................ 1500 VAC Secondary to Case.................... 500 VAC Isolation Resistance.................................... 100 MΩ ENVIRONMENTAL SPECIFICATIONS Operating Temperature .............................. 0˚C ~ +60˚C Derates linearly 2.5%/˚C after 50˚C Cooling........................................................ Convection Temperature Coefficient.............................. 0.02% / ˚C Humidity...................................................... 20~85% Rh Storage Temperature.................................. -20˚ ~ +85˚C Shock/Vibration........................................... Shock: 20G (3 Directions each 3 times) Vibration: 1~55Hz SAFETIES / EMI FCC Part 15-B EN 55022-B PHYSICAL SPECIFICATIONS Board Level Encapsulated Thru-hole Pins 88 Series MODEL KB06-05S KB06-12S KB06-15S KB06-24S KB06-122D KB06-153D INPUT RATING 115-230 V 115-230 V 115-230 V 115-230 V 115-230 V 115-230 V 50-60 HZ 50-60 HZ 50-60 HZ 50-60 HZ 50-60 HZ 50-60 HZ OUTPUT VOLTAGE OUTPUT CURRENT 5 VDC 12 VDC 15 VDC 24 VDC ± 12 VDC ± 15 VDC 0 ~ 1.2 A 0 ~ 0.5 A 0 ~ 0.4 A 0 ~ 250 mA ±25 ~ 250 mA ±20 ~ 200 mA EFFICIENCY AT 100% LOAD (TYP.) 70% 75% 75% 75% 75% 75% KB6 Series NOTE: All specifications typical and nominal / full load and 25˚C unless otherwise noted. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. • Dimensions in mm 89