IF filter

www.DataSheet4U.com К2011 4x2.54 IF filter for intercarrier application (IF= 38.0 MHz. standard B/G-CCIR, D/K-OIRT) 2.6 8.6max 2 3 4 5 6 2 5 18.7max 16.8 3.5max 3 6 4 1.0 2.8 Package SIP6M 3.0 D0.5 Pin configuration 2 – Input 3 - Input - ground 4 - Chip carrier - ground 5 - Output 6 - Output Characteristics (measuring conditions: Т=25°С, Zsource=50 Ω, Zload=2kΩ//3pF) Parameter Insertion attenuation at (reference level for the following data) Relative attenuation: Picture carrier Color carrier Sound carrier Lower sidelobe Adjacent picture carrier Adjacent sound carrier Upper sidelobe Amplitude ripple: 31,4-31,6 MHz 32,4-32,6 MHz 33,57-37,0 MHz Reflected wave signal suppression 1,2 -6,0 µs after main pulse ( test pulse: 250 ns, carrier frequency 36,5 MHz) Feedthrough signal suppression 0,9 – 1,2 µs before main pulse (test pulse: 250 ns, carrier frequency 36,5 MHz) Impedance at 36,5MHz Input Zin=Rin //Cin Output Zout =Rout //Cout Group delay predistortion (reference frequency 38,0 MHz) 33,57MHz 35,9 MHz Temperature coefficient of frequency 2,0 3,5 0,5 40 40 0,6 2,5 0,7 46 52 1,3//13,0 3,0//5,0 dB dB dB dB dB kΩ//pF kΩ//pF ns ns ppm/°K 36,5MHz 38,0 MHz 33,57 MHz 33,3 MHz 31,5 MHz 32,5 MHz 15,0-30,0 MHz 30,0 MHz 39,5 MHz 39,5-42,0 MHz 42,0-56 MHz 5,5 min. max. 16,7 7,5 1,8 3,2 15,5 17 type 15,2 6,5 0,8 2,2 14 15,5 44 50 50 44 42 unit dB dB dB dB dB dB dB dB dB dB dB 13 14 40 45 40 40 40 0 -50 -72 www.DataSheet4U.com Frequency response Amplitude Frequency Amplitude GD Frequency Maximum ratings Min ambient temperature Max ambient temperature Min storage temperature Max storage temperature DC voltage ( between any terminals) AC voltage ( between any terminals) -10°С 55°С -60°С 55°С 12 V 10 V