(IXCx10Mx5S) Switchable Current Regulators

www.DataSheet4U.com Switchable Current Regulators IXCP IXCY IXCP IXCY 10M35S 10M35S 10M45S 10M45S Maximum Ratings VAK = 350/450 V IA(P) = 2 - 100 mA Ω RDYN = 9 - 900 kΩ Symbol VAKR VAGR VAGR VGK ID PD TJ Tstg TL MD Test Condition TJ = 25°C to 150°C TJ = 25°C to 150°C 10M35S 10M45S 10M35S 10M45S 350 450 350 450 ±20 V V V V V A W °C °C °C Nm/lb.in. Nm/lb.in. TO-220 AB (IXCP) A G TO-252 AA (IXCY) A G K Pin connections 1 = G, Control terminal; 2 and 4 = A (+) Positive terminal 3 = K (-), Negative terminal A K TC = 25°C TC = 25°C -0.3 40 -55 ... +150 -55 ... +150 260 0.45/4 0.55/5 Temperature for Soldering (max. 10 s) Mounting torque with screw M3 (TO-220) with screw M3.5 (TO-220) Features Symbol Test Condition Characteristic Values (TJ = 25°C unless otherwise specified) min. typ. max. 10M35S 10M45S 350 450 7 -5 -5 25 25 10 10 15 V V mA V V µA µA kΩ 3.1 K/W 80 K/W 100 K/W Minimum of 350/450 V breakdown Resistor programmable current source 40 W continuous dissipation International standard packages JEDEC TO-220 and TO-252 On/Off switchable current source Applications Start-up circuits for SMPS Highly stable voltage sources Surge limiters and voltage protection Instantaneously reacting resetable fuses Soft start-up circuits VAKR IA(P) VG(off) RK = 300 Ω, (Fig. 4) VD = 10 V; RK = 300 Ω; (Fig. 5) ID = 100 µA; VD = 300 V 10M35S ID = 100 µA; VD = 400 V 10M45S Fig. 4 VD= 300 V; VGK = -10 V VD= 400 V; VGK = -10 V Fig. 4 10M35S 10M45S IAV ∆VAK/∆ IA(p ∆ RthJC RthJA Dynamic resistance; VD= 10 V RK = 300 Ω; (Fig. 4) Thermal Resistance junction-to-case Thermal Resistance junction-to-ambient TO-220 TO-252 © 2000 IXYS All rights reserved 98704B (05/00) IXCP 10M35S IXCP 10M45S A (+) G ID(p) VD K (-) RK IXCY 10M35S IXCY 10M45S TO-220 AB Outline Fig. 1 Resistor RK in series with negative pin to achieve different current levels 100 ID(P) - milliamperes 10 1 10 100 1000 10000 TO-252 AA Outline Series Resistor R X - Ohms Fig. 2. Plateau current versus external resistance A (+) G VGK ID(p) VD K (-) Fig. 3. Current regulator controlled by VG 1000 Dim. A A1 A2 b b1 b2 c c1 D D1 E E1 e e1 H L L1 L2 L3 4,881,106 4,931,844 5,017,508 5,034,796 Millimeter Min. Max. 2.19 2.38 0.89 1.14 0 0.13 0.64 0.89 0.76 1.14 5.21 5.46 0.46 0.58 0.46 0.58 5.97 6.22 4.32 5.21 6.35 6.73 4.32 5.21 2.28 BSC 4.57 BSC 9.40 10.42 0.51 1.02 0.64 1.02 0.89 1.27 2.54 2.92 Inches Min. Max. 0.086 0.094 0.035 0.045 0 0.005 0.025 0.035 0.030 0.045 0.205 0.215 0.018 0.023 0.018 0.023 0.235 0.245 0.170 0.205 0.250 0.265 0.170 0.205 0.090 BSC 0.180 BSC 0.370 0.410 0.020 0.040 0.025 0.040 0.035 0.050 0.100 0.115 5,486,715 5,381,025 ID(P) - milliamperes 100 10 1 0.1 -3.5 -3.0 -2.5 -2.0 VGS - Volts -1.5 -1.0 Fig. 4. Plateau current versus applied input voltage IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,850,072 5,049,961 5,063,307 5,187,117 5,237,481