DC-DC
www.DataSheet4U.com
1 Watts IV Series
DC-DC
xppower.com
• • • • • • •
Single or Dual Output SIP Package DIP Package 3000 VDC Isolation Short Circuit Protection -40 ºC to +85 ºC Operation Industry Standard Pinout
Specification
Input
Input Voltage Range Input Current (no load) Input Reflected Ripple Input Reverse Voltage Protection • • • • Nominal ±10% See table 200 mV pk-pk None
Input Voltage No Load Input Current 22 22 23 25 30 16 15 20 15 15 10 8 8 8 9 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Output Voltage 5.0 9.0 12.0 15.0 24.0 5.0 9.0 12.0 15.0 24.0 5.0 9.0 12.0 15.0 24.0 V V V V V V V V V V V V V V V Output Current 200 112 84 66 42 200 112 84 66 42 200 112 84 66 42 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Efficiency 78% 78% 78% 80% 80% 70% 80% 75% 80% 80% 78% 75% 75% 78% 78% Model Number(1,2) IV0505SA† IV0509SA IV0512SA† IV0515SA† IV0524SA IV1205SA† IV1209SA IV1212SA† IV1215SA† IV1224SA IV2405SA IV2409SA IV2412SA IV2415SA IV2424SA
5 VDC
Output
Output Voltage • Minimum Load • Line Regulation • Load Regulation • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Short Circuit Protection • Maximum Capacitive • Load See table None 1.2%/1% ∆ Vin ±8% 20-100% load change ±5% 100 mV pk-pk 0.02%/ºC 1 s max ±220 µF
12 VDC
24 VDC
† Available from Farnell InOne. See pages 236-237
Mechanical Details
SIP Package
0.78 (19.81) max
DIP Package
0.80 (20.32) max 0.24 (6.09) max 0.40 (10.16) max
General
Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency • • • • • See table 3000 VDC minimum 109 Ω 60pF typical 80 kHz typical
0.015 (0.38)
0.40 (10.16) max
0.28 (7.11) max
Environmental
Operating Temperature Storage Temperature Case Temperature Cooling • • • • -40 to +85 ºC -40 to +125 ºC 100 ºC max Free-air convection
0.12 (3.05) min
0.10 (2.54)
0.10 (2.54) min
GND
NC
0.01(0.25) max 0.09 (2.28)
Vcc GND
-V
+V
Vcc
0V
+V
0.30 (7.62)
0.60 (15.24)
0.01 (0.25)
0.60 (15.24)
Single Output
Single Output
GND NC
Notes
1. For dual output, delete suffix ‘A’, and split current equally between rails. 2. For DIP package, replace ‘S’ in part number with ‘D’. 3. All dimensions in inches (mm).
0.01(0.25) max 0.09 (2.28)
Vcc GND
-V 0V +V Vcc -V 0V +V
0.30 (7.62)
0.60 (15.24)
0.01 (0.25)
0.60 (15.24)
Dual Output
Dual Output
04/04/05
