Integrated Point-of-Load Power Modules

FEATURES High efficiency: 91% @ 12Vin, 6.5V/3A 88% @ 24Vin, 6.5V/3A Small size and low profile: 17.8x15.0x7.8mm (0.70”x0.59”x0.31”) Output voltage adjustment: 3.3V~6.5V Monotonic startup into normal and pre-biased loads Input UVLO, output OCP Remote ON/OFF Output short circuit protection Fixed frequency operation Copper pad to provide excellent thermal performance ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950) Certified CE mark meets 73/23/EEC and 93/68/EEC directives Delphi Series IPM24S0B0, Non-Isolated, Integrated Point-of-Load Power Modules: 11V~36V input, 3.3~6.5V and 3A Output www.DataSheet4U.com OPTIONS SMD or SIP package The Delphi Series IPM24S0B0 non-isolated, fully integrated Point-of-Load (POL) power modules, are the latest offerings from a world leader in power systems technology and manufacturing -Delta Electronics, Inc. This product family provides up to 3A of output current or 20W of output power in an industry standard, compact, IC-like, molded package. It is highly integrated and does not require external components to provide the point-of-load function. A copper pad on the back of the module; in close contact with the internal heat dissipation components; provides excellent thermal performance. The assembly process of the modules is fully automated with no manual assembly involved. These converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. IPM24S0B0 operates from an 11V~36V source and provides a programmable output voltage from 3.3V to 6.5V. The IPM product family is available in both a SMD or SIP package. IPM24S family is also available for output 1.2V~2.5V. Please refer to IPM240A0 datasheet for details. DATASHEET IPM24S0B0S/R03_06272006 APPLICATIONS Telecom/DataCom Wireless Networks Optical Network Equipment Server and Data Storage Industrial/Test Equipment Delta Electronics, Inc. TECHNICAL SPECIFICATIONS TA = 25°C, airflow rate = 300 LFM, Vin = 24Vdc, nominal Vout unless otherwise noted. PARAMETER ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Operating Temperature Storage Temperature INPUT CHARACTERISTICS Operating Input Voltage Input Under-Voltage Lockout Turn-On Voltage Threshold Turn-Off Voltage Threshold Maximum Input Current No-Load Input Current Off Converter Input Current Input Reflected-Ripple Current Input Voltage Ripple Rejection OUTPUT CHARACTERISTICS Output Voltage Set Point Output Voltage Adjustable Range Output Voltage Regulation Over Line Over Load Over Temperature Total Output Voltage Range Output Voltage Ripple and Noise Peak-to-Peak RMS Output Current Range Output Voltage Over-shoot at Start-up Output DC Current-Limit Inception DYNAMIC CHARACTERISTICS Dynamic Load Response Positive Step Change in Output Current Negative Step Change in Output Current Setting Time to 10% of Peak Devitation Turn-On Transient Start-Up Time, From On/Off Control Start-Up Time, From Input Output Voltage Rise Time Maximum Output Startup Capacitive Load EFFICIENCY Vo=3.3V Vo=4.0V Vo=5.0V Vo=6.5V Vo=3.3V Vo=4.0V Vo=5.0V Vo=6.5V FEATURE CHARACTERISTICS Switching Frequency ON/OFF Control, (Logic High-Module ON) Logic High Logic Low ON/OFF Current Leakage Current GENERAL SPECIFICATIONS Calculated MTBF Weight NOTES and CONDITIONS IPM24S0B0R/S03FA Min. Typ. Max. 40 +125 +125 36 10.31 10.10 Units Vdc °C °C V V V A mA mA mAp-p dB Vdc V % Vo,set % Vo,set %Vo,set/℃ % Vo,set mVp-p mV A % Vo,set % Io mVpk mVpk µs ms ms ms µF µF % % % % % % % % kHz Vin,max 0.8 1 50 V V mA µA M hours grams 0 -40 -55 11 Please refer to Fig.32 for the measuring point Vin=Vin,min to Vin,max, Io=Io,max P-P 0.5µH inductor, 5Hz to 20MHz 120 Hz Vin=24V, Io=Io,max, Ta=25℃ Vin=Vin,min to Vin,max Io=Io,min to Io,max Ta=Ta,min to Ta,max Over sample load, line and temperature 5Hz to 20MHz bandwidth Full Load, 1µF ceramic, 220µF Poscap Full Load, 1µF ceramic, 220µF Poscap Vo>3.3Vdc Vin=11V to 36V, Io=0A to 3A, Ta=25℃ 220µF Poscap & 1µF Ceramic load cap, 0.5A/µs 50% Io, max to 100% Io, max 100% Io, max to 50% Io, max Io=Io.max Time for Vo to rise from 10% to 90% of Vo,set, Full load; ESR ≧25mΩ Full load; ESR ≧18mΩ Vin=12V, Io=Io,max, Ta=25℃ Vin=12V, Io=Io,max, Ta=25℃ Vin=12V, Io=Io,max, Ta=25℃ Vin=12V, Io=Io,max, Ta=25℃ Vin=24V, Io=Io,max, Ta=25℃ Vin=24V, Io=Io,max, Ta=25℃ Vin=24V, Io=Io,max, Ta=25℃ Vin=24V, Io=Io,max, Ta=25℃ 5 17 17 9 3.251 3.3 50 3 60 TBD 3.3 0.3 0.3 0.01 -3.0 50 25 0 0 200 75 75 200 2.5 10 150 3.350 6.5 0.025 +3.0 100 50 3 1 200 200 300 50 50 17 220 1220 85.0 86.5 88.5 90.0 81.0 83.0 85.0 87.0 86.5 88.0. 89.5 91.0 82.5 84.5 86.0 88.0 300 Module On Module Off Ion/off at Von/off=0 Logic High, Von/off=5V Io=80% Io,max, Ta=25℃ 2.4 -0.2 0.25 13.74 6 DS_IPM24S0B0_06272006 2 ELECTRICAL CHARACTERISTICS CURVES 89.0 Efficiency% Efficiency% 84.0 79.0 74.0 69.0 64.0 59.0 54.0 Vin=11V Vin=12V Vin=24V Vin=36V 90.0 86.0 82.0 78.0 74.0 70.0 66.0 62.0 58.0 54.0 Vin=11V Vin=12V Vin=24V Vin=36V 0.0 0.5 1.0 1.5 2.0 Iout (A) 2.5 3.0 0.0 0.5 1.0 1.5 2.0 Iout (A) 2.5 3.0 Figure 1: Converter efficiency vs. output current (3.30V output voltage) Figure 2: Converter efficiency vs. output current (4.0V output voltage) 92.0 88.0 84.0 80.0 76.0 72.0 68.0 64.0 60.0 Vin=11V Vin=12V Vin=24V Vin=36V 95.0 91.0 87.0 83.0 79.0 75.0 71.0 67.0 63.0 Efficiency% Efficiency% Vin=11V Vin=12V Vin=24V Vin=36V 0.0 0.5 1.0 1.5 2.0 Iout (A) 2.5 3.0 0.0 0.5 1.0 1.5 2.0 Iout (A) 2.5 3.0 Figure 3: Converter efficiency vs. output current (5.0V output voltage) Figure 4: Converter efficiency vs. output current (6.5V output voltage) Figure 5: Output ripple & noise at 12Vin, 3.3V/3A out Figure 6: Output ripple & noise at 24Vin, 3.3V/3A out DS_IPM24S0B0_06272006 3 ELECTRICAL CHARACTERISTICS CURVES Figure 7: Output ripple & noise at 12Vin, 4.0V/3A out Figure 8: Output ripple & noise at 24Vin, 4.0V/3A out Figure 9: Output ripple & noise at 12Vin, 5.0V/3A out Figure 10: Output ripple & noise at 24Vin, 5.0V/3A out Figure 11: Output ripple & noise at 12Vin, 6.5V/3A out Figure 12: Output ripple & noise at 24Vin, 6.5V/3A out DS_IPM24S0B0_06272006 4 ELECTRICAL CHARACTERISTICS CURVES Figure 13: Power on waveform at 12vin, 3.3V/3A out with application of Vin Figure 14: Power on waveform at 12vin, 6.5V/3A out with application of Vin Figure 15: Power off waveform at 12vin, 3.3V/3A out with application of Vin Figure 16: Power off waveform 12vin,6.5V/3A out with application of Vin Figure 17: Remote turn on delay time at 24vin, 6.5V/3A out Figure 18: Remote turn on delay time at 24vin, 6.5V/3A out DS_IPM24S0B0_06272006 5 ELECTRICAL CHARACTERISTICS CURVES Figure 19: Turn on delay at 24vin, 3.3V/3A out with application of Vin Figure 20: Turn on delay at 24vin, 6.5V/3A out with application of Vin Figure 21: Typical transient response to step load change at 0.5A/µS from 100% to 50% of Io, max at 12Vin, 6.5V out (measurement with a 1uF ceramic Figure 22: Typical transient response to step load change at 0.5A/µS from 50% to 100% of Io, max at 24Vin, 6.5V out (measurement with a 1uF ceramic) DS_IPM24S0B0_06272006 6 TEST CONFIGURATIONS TO OSCILLOSCOPE DESIGN CONSIDERATIONS Input Source Impedance VI(+) L 2 100uF Electrolytic BATTERY 3.3uF Ceramic VI(-) To maintain low-noise and ripple at the input voltage, it is critical to use low ESR capacitors at the input to the module. Figure 26 shows the input ripple voltage (mVp-p) for various output models using 2x100uF low ESR electrolytic capacitors (Rubycon P/N:50YXG100, 100uF/50V or equivalent) and 1x3.3.0 uF very low ESR ceramic capacitors (TDK P/N: C4532JB1H335M, 3.3uF/50V or equivalent). The input capacitance should be able to handle an AC ripple current of at least: Irms = Iout Vout ⎛ Vout ⎞ ⎜1 − ⎟ Vin ⎝ Vin ⎠ Arms Note: Input reflected-ripple current is measured with a simulated source inductance. Current is measured at the input of the module. Figure 23: Input reflected-ripple current test setup COPPER STRIP Vo 220uF 1uF PosCap ceramic SCOPE Resistive Load GND Note: Use a 220µF PosCap and 1µF capacitor. Scope measurement should be made using a BNC connector. Figure 24: Peak-peak output noise and startup transient measurement test setup CONTACT AND DISTRIBUTION LOSSES Figure 26: Input ripple voltage for various output models, Io = 3A (Cin =2x100uF electrolytic capacitors 1x3.3uF ceramic capacitors at the input) VI II SUPPLY Vo Io LOAD GND CONTACT RESISTANCE The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the module. An input capacitance must be placed close to the modules input pins to filter ripple current and ensure module stability in the presence of inductive traces that supply the input voltage to the module. Figure 25: Output voltage and efficiency measurement test setup Note: All measurements are taken at the module terminals. When the module is not soldered (via socket), place Kelvin connections at module terminals to avoid measurement errors due to contact resistance. Vo × Io ) × 100 % DS_IPM24S0B0_06272006 Vi × Ii η =( 7 DESIGN CONSIDERATIONS Remote On/Off The IPM series power modules have an On/Off control pin for output voltage remote On/Off operation. The On/Off pin is an open collector/drain logic input signal that is referenced to ground. When On/Off control pin is not used, leave the pin unconnected. The remote on/off pin is internally connected to +5Vdc through an internal pull-up resistor. Figure 27 shows the circuit configuration for applying the remote on/off pin. The module will execute a soft start ON when the transistor Q1 is in the off state. The typical rise for this remote on/off pin at the output voltage of 2.5V and 5.0V are shown in Figure 17 and 18. FEAT