GENERAL PURPOSE DUAL TRANSISTOR

www.DataSheet4U.com UTC IMX17 GENERAL PURPOSE DUAL TRANSISTOR FEATURES *Two 2SD1484K chips in an SMT package. *Mounting possible with SMT3 automatic mounting machine. *Transistor elements are independent, eliminating interference. *High collector current. Ic=500mA *Mounting cost an area can be cut in half. DUAL TRANSISTOR MARKING SOT-26 4 5 6 17 3 2 1 PIN 1 : Collector (1) PIN 2: Base (2) PIN 3: Emitter (2) PIN 4: Collector (2) PIN 5: Base (1) PIN 6: Emitter (1) 4 5 6 Tr1 Tr2 3 2 1 UTC UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R215-001,B UTC IMX17 The following characteristics apply to both Tr1 and Tr2. DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°C, unless otherwise specified.) PARAMETER SYMBOL VCBO VCEO VEBO Ic Pd Tj TSTG RATING 60 50 5 500 300 (TOTAL) 150 -55 ~ +150 UNIT V V V mA mW (note) °C °C Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector dissipation Junction Temperature Storage Temperature Note: 200mW per element must not be exceeded. ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified) PARAMETER Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Output capacitance Note: Measured using pulse current. SYMBOL BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob TEST CONDITIONS Ic=100µA Ic=1mA IE=100µA VCB=30V VEB=4V Ic=500mA, IB=50mA VCE=3V,Ic=100mA (note) VCE=5V, IE=-20mA, f=100MHz VCE=10V, IE=0A, f=1MHz MIN 60 50 5 TYP MAX UNIT V V V µA µA V MHz pF 120 250 7 0.1 0.1 0.6 390 CLASSIFICATION OF hFE RANK RANGE A 120-240 B 240-390 ELECTRICAL CHARACTERISTIC CURVES UTC UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R215-001,B UTC IMX17 DUAL TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R215-001,B