Case package Transmissive Photointerrupter

www.DataSheet4U.com GP1S58VJ000F GP1S58VJ000F Gap : 5mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter ■ Description GP1S58VJ000F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. This device uses positioning pins to insure accurate placement and avoid miss-orientation of the emitter and detector. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit ■ Features 1. Transmissive with phototransistor output 2. Highlights : • Vertical Slit for alternate motion detection • Positioning Pin to prevent misalignment 3. Key Parameters : • Gap Width : 5mm • Slit Width (detector side): 0.5mm • Package : 13.7×10×5.2mm 4. Lead free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A02702EN Date Sep. 1. 2006 © SHARP Corporation GP1S58VJ000F ■ Internal Connection Diagram Top view 3 2 1 Anode 2 Cathode 4 1 3 Collector 4 Emitter ■ Outline Dimensions Top view 13.7+0.3 −0.3 Model. No. 5.0+0.2 −0.1 5.2 S58 (Unit : mm) SHARP mark "S" 0.5 3.5 (2.5) (Detector center) A-Aʼ section B-Bʼ section 0.5 1.5 1 2 C1 Date code (Both side) MIN 10 A B 7.5 2-0.7 10 0.45+0.30 −0.10 (2.54) Aʼ Bʼ (10.3) 0.4+0.3 −0.1 φ0 .7 4 6.5 2.0 φ0 3 .7 2.5 • Unspecified tolerance shall be as follows ; Dimensions (d) d≤6.0 6.0