Case package Transmissive Photointerrupter

www.DataSheet4U.com GP1S56TJ000F GP1S56TJ000F Gap : 2mm, Slit : 0.15mm Phototransistor Output, Case package Transmissive Photointerrupter ■ Description GP1S56TJ000F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. This device is unique because it uses position pins to insure accurate placement on the PCB, and has the short profile. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit ■ Features 1. Transmissive with phototransistor output 2. Highlights : • Vertical Slit for alternate motion detection • Positioning Pin to prevent misalignment • High resolution (Slit width : 0.15 mm) 3. Key Parameters : • Gap Width : 2mm • Slit Width (detector side): 0.15mm • Package : 11×7.5×5mm 4. Lead free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A02701EN Date Oct. 3. 2005 © SHARP Corporation GP1S56TJ000F ■ Internal Connection Diagram Top view 3 2 1 Anode 2 Cathode 4 1 3 Collector 4 Emitter ■ Outline Dimensions Top view Date code S (Unit : mm) Model No. (5.5) Detector center SHARP mark "S" 5 B-Bʼ section 56 A-Aʼ section 11 C1 0.15 ±0.07 2+0.3 −0 A B 0.15±0.07 C1 12MIN. 7.5MAX. 2− φ 0.7±0.05 4−0.45+0.3 −0.1 4−0.4+0.3 −0.1 (2.54) 4 Aʼ (7.4) 10.2±0.15 1 3 2 • Unspecified tolerance shall be as follows ; Dimensions (d) d≤6 6