OPIC Output Case package Transmissive Photointerrupter



Part  Number GP1A51HRJ00F
Manufacturer Sharp Electrionic
Semiconductor DataSheet

DataSheet View

www.DataSheet4U.com GP1A51HRJ00F GP1A51HRJ00F Gap : 3mm, Slit : 0.5mm *OPIC Output Case package Transmissive Photointerrupter ■ Description GP1A51HRJ00F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. The case includes additional screw fixing holes, on both sides 3.2mm diameter. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit ■ Features 1. Transmissive with OPIC output 2. Highlights: • Verical Slit for alternate motion detection • Output Low Level at intercepting optical path • Includes additional screw fixing holes 3. Key Parameters: • Gap Width : 3mm • Slit Width (detector side) : 0.5mm • Package : 12.2×10×18mm 4. Lead free and RoHS directive compliant * "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A03601EN Date Oct. 3. 2005 © SHARP Corporation GP1A51HRJ00F ■ Internal Connection Diagram Top view Voltage regulator 3 2 (15kΩ) 4 1 2 3 4 5 Anode Cathode VCC VO GND Amp 5 1 ■ Outline Dimensions Top view 12.2±0.3 2 3+0.2 −0.1 (Unit : mm) 5 2−φ3.2±0.2 7 6 10 0.5 3.5 (Detctor center) 2.5 A-Aʼ section B-Bʼ section 1.5 A B Model No. 1A51HR 0.5 5−0.45+0.3 −0.1 9MIN. Aʼ Bʼ Date code (1.5) 2−(1.27) 12 18 5 4 3 (9.2) 1 2 • Unspecified tolerance shall be as follows ; Dimensions (d) d≤6 6



Parts Cross Reference
See crosses for CROSS REFERENCE - No Registering Required.


English     |     日本語     |     漢語     |     한국어     |     Netherlands     |     La France     |     L'Italia     |     Deutschland     |     Россия
This is a individually operated, non profit site.
If this site is good enough to show, please introduce this site to others...

It welcomes all helping each other.     Tool Bar     |    Contact us     |     Link Exchange     |     Buy Components ?     |     Parts Cross Reference