Mini BLOCK Housing 16 opto inputs

General Purpose Controller 80c32, ® grifo80c320,BLOCK Housing Mini 89c51Rx2 16 opto inputs, 8 Relay outputs CAN HR168 GMT GMB TECHNICAL MANUAL www.DataSheet4U.com Via dell' Artigiano, 8/6 ® 40016 San Giorgio di Piano (Bologna) ITALY ITALIAN TECHNOLOGY E-mail: grifo@grifo.it http://www.grifo.it http://www.grifo.com Tel. +39 051 892.052 (a. r.) FAX: +39 051 893.661 grifo Rel. 5.00 Ed. 02 April 2004 GMB HR168 ® ® , GPC , grifo , are trade marks of grifo® General Purpose Controller 80c32, ® grifo80c320,BLOCK Housing Mini 89c51Rx2 16 opto inputs, 8 Relay outputs CAN HR168 GMT GMB TECHNICAL MANUAL Modular plastic container DIN 50022 modulbox, model M6 HC53; size: front 90 x 106 mm, heigh 58 mm; mounting on Omega rail DIN 46277-1 and DIN46277-3; 16 optocoupled inputs indifferently NPN or PNP; status of 16 inputs visualized by 16 LEDs; some inputs can be counters and interrupt generators; 8 Relays Outputs 5 A; status of 8 outputs visualized by 8 LEDs; some outputs can feature PCA for automatic timed commands; 1 TTL output driven by optional on board RTC and visualized by its own LED; serial line in RS 232, RS 422 , RS 485, Current loop and TTL; 1 A/D line with full range selectable; 1 TTL PWM to generate a D/A-like signal by software; connection of all signals through Comfortable connectors featuring standard pin-out; up to 5 lines of I/O TTL; line I2C BUS available for external devices on dedicated connector; onboard Switching power supply; protection for on-board logic through TransZorb; DC or AC power supply: 10÷38Vdc or 8÷23Vac for logic and 9÷28Vdc or 9÷23Vac for optocoupled intputs; 40 pin 600 mils socket for connection of Mini Modules grifo® like: GMM AC2 , GMM AM32, GMM 4620, etc. Via dell' Artigiano, 8/6 ® 40016 San Giorgio di Piano (Bologna) ITALY ITALIAN TECHNOLOGY E-mail: grifo@grifo.it http://www.grifo.it http://www.grifo.com Tel. +39 051 892.052 (a. r.) FAX: +39 051 893.661 grifo Rel. 5.00 Ed. 02 April 2004 GMB HR168 ® ® , GPC , grifo , are trade marks of grifo® DOCUMENTATION COPYRIGHT BY grifo® , ALL RIGHTS RESERVED No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, either electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written consent of grifo®. IMPORTANT Although all the information contained herein have been carefully verified, grifo® assumes no responsability for errors that might appear in this document, or for damage to things or persons resulting from technical errors, omission and improper use of this manual and of the related software and hardware. grifo® reserves the right to change the contents and form of this document, as well as the features and specification of its products at any time, without prior notice, to obtain always the best product. For specific informations on the components mounted on the card, please refer to the Data Book of the builder or second sources. SYMBOLS DESCRIPTION In the manual could appear the following symbols: Attention: Generic danger Attention: High voltage Attention: ESD sensitive device Trade Marks , GPC®, grifo® : are trade marks of grifo®. Other Product and Company names listed, are trade marks of their respective companies. ITALIAN TECHNOLOGY grifo® GENERAL INDEX INTRODUCTION ........................................................................................................................ 1 CARD VERSION ......................................................................................................................... 2 GENERAL INFORMATION ...................................................................................................... 2 ANALOG INPUT .................................................................................................................... 4 OPTOCOUPLED DIGITAL INPUT LINES ........................................................................ 4 SERIAL COMMUNICATION ............................................................................................... 4 I2C BUS LINES ........................................................................................................................ 4 MINI MODULE ...................................................................................................................... 5 I/O TTL SIGNALS .................................................................................................................. 5 DIGITAL RELAYS OUTPUTS .............................................................................................. 5 POWER SUPPLY SECTION ................................................................................................. 6 TELECONTROL FIRMWARE ............................................................................................. 6 TECHNICAL FEATURES .......................................................................................................... 8 GENERAL FEATURES .......................................................................................................... 8 PHYSICAL FEATURES ......................................................................................................... 8 ELECTRIC FEATURES ........................................................................................................ 9 INSTALLATION ........................................................................................................................ 10 CONNECTIONS ................................................................................................................... 10 CN5 - POWER SUPPLY CONNECTOR ....................................................................... 10 CN8 - I2C BUS LINE CONNECTOR ............................................................................. 11 ZC1 - CONTROL DEVICE SOCKET ........................................................................... 12 CN6 - SERIAL LINE CONNECTOR ............................................................................. 14 CN1 - OPTOCOUPLED DIGITAL INPUTS CONNECTOR GROUP 1 .................... 20 CN2 - OPTOCOUPLED DIGITAL INPUTS CONNECTOR GROUP 2 .................... 22 CN3 - RELAYS OUTPUTS CONNECTOR GROUPS A, B AND C ........................... 24 CN4 - RELAYS OUTPUTS CONNECTOR GROUP D ............................................... 26 CN7 - TTL I/O, A/D, ETC. CONNECTOR .................................................................... 28 INTERRUPTS ....................................................................................................................... 30 I/O CONNECTION ............................................................................................................... 30 POWER SUPPLY .................................................................................................................. 32 VISUAL SIGNALATIONS ................................................................................................... 34 JUMPERS .............................................................................................................................. 36 2 PINS JUMPERS ............................................................................................................ 38 5 PINS JUMPERS ............................................................................................................ 38 3 PINS JUMPERS ............................................................................................................ 39 INPUTS CONFIGURATION AS NPN OR PNP ................................................................ 40 BACK UP ............................................................................................................................... 40 ANALOG INPUT .................................................................................................................. 40 SERIAL COMMUNICATION SELECTION .................................................................... 42 GMB HR168 Rel. 5.00 Page I grifo® ITALIAN TECHNOLOGY PERIPHERAL DEVICES SOFTWARE DESCRIPTION ..................................................... 46 RELAYS OUTPUTS ............................................................................................................. 46 SERIAL LINE ........................................................................................................................ 46 I2C BUS ................................................................................................................................... 47 OPTOCOUPLED INPUTS ................................................................................................... 47 DIGITAL TTL I/O ................................................................................................................. 47 RTC + SRAM ......................................................................................................................... 48 EXTERNAL CARDS ................................................................................................................. 49 BIBLIOGRAPHY ....................................................................................................................... 52 APPENDIX A: DATA SHEET OF PCF 8583 ......................................................................... A-1 APPENDIX B: ALPHABETICAL INDEX ............................................................................ B-1 Page II GMB HR168 Rel. 5.00 ITALIAN TECHNOLOGY grifo® FIGURE INDEX FIGURE 1: BLOCK DIAGRAM ............................................................................................................. 7 FIGURE 2: CN5 - POWER SUPPLY CONNECTOR ................................................................................ 10 FIGURE 3: CN8 - I2C BUS LINE CONNECTOR ................................................................................ 11 FIGURE 4: ZC1 - CONTROL DEVICE SOCKET