(G6K Series) Low Signal Relay

( DataSheet : www.DataSheet4U.com ) Low Signal Relay s Fourth generation design s Design based on worldwide communica- G6K s s s s tions, computer peripheral and office automation relay requirements Offers excellent board space savings Meets 2.5kV Bellcore surge requirements Terminal design based on Omron's successful G6S relay Available in PCB through-hole, SMT gullwing and SMT “inside-L” terminals soon! s 85°C high ambient versions coming Ordering Information To Order: Select the part number and add the desired coil voltage rating (e.g., G6K-2F-DC5). Part number (non-latching, fully sealed) Type Standard Contact form DPDT SMT gullwing G6K-2F To be announced SMT “inside-L” G6K-2G PCB through-hole G6K-2P High-Ambient DPDT Specifications s CONTACT DATA Load Rated load Contact material Max. carry current Max. operating voltage Max. operating current Max. switching capacity Min. permissible load Resistive load (cosφ=1) 0.3 A at 125 VAC 1 A at 30 VDC Ag (Au clad) 1A 125 VAC, 60 VDC 1A 37.5 VA, 30W 10 µA at 10 mVDC www.DataSheet4U.com G6K Standard DPDT (G6K-2F, G6K-2G, G6K-2P) Rated voltage (VDC) 3 4.5 5 6 9 12 24 Rated current (mA) 33.0 23.2 21.1 17.6 11.3 8.5 4.6 Coil resistance (Ω) 91 194 237 341 795 1,407 5,220 Pick-up voltage % of rated voltage 80% max. 10% min. 200% max. Dropout voltage Maximum voltage Power consumption (mW) 100 (approx.) G6K High-ambient DPDT (To be released) Rated voltage (VDC) 3 4.5 5 6 9 12 24 Note: 1. 2. 3. 4. 5. Rated current (mA) 46.7 31.1 28.0 23.3 15.6 11.7 5.8 Coil resistance (Ω) 64 145 179 257 579 1,029 4,114 Pick-up voltage % of rated voltage 75% max. 10% min. 200% max. Dropout voltage Maximum voltage Power consumption (mW) 140 (approx.) The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ± 10%. The operating characteristics are measured at a coil temperature of 23°C (73°F) unless otherwise specified. Pick-up voltage is measured with no carry current across the contacts. Pick-up voltage will vary with temperature. Specifications subject to change without notice. s CHARACTERISTICS Contact resistance (initial) Operate time Release time Bounce time Insulation resistance Dielectric strength 80 mΩ max. 3 ms max. 3 ms max. 3 ms max. 1,000 MΩ min. (at 500 VDC) 1,500 VAC for 1 min. between coil and contacts 1,000 VAC for 1 minute between contacts of different poles 750 VAC for 1 minute between contacts of the same pole Surge withstand voltage 2,500 V, 2x10µs (conforms to Bellcore specifications) between coil and contacts 1,500 V, 10x160µs (conforms to FCC Part 68) between contacts of different poles 1,500 V, 10x160µs (conforms to FCC Part 68) between contacts of the same pole Vibration Shock Mechanical durability Malfunction durability Mechanical durability Malfunction durability Ambient temperature Humidity Service life Mechanical Electrical Note: Data shown are of initial value. 10 to 55 Hz; 5.0 mm double amplitude 10 to 55 Hz; 3.3 mm double amplitude 1,000 m/s2; approx. 100G 750 m/s2; approx. 75G Standard versions: -40°C to 70°C (-40°F to 158°F) High ambient versions: -40°C to 85°C (-40°F to 185°F) 35 to 85% RH 100,000,000 operations min. (at 36,000 operations per hour) 100,000 operations min. at rated load (at 1,800 operations per hour) 2 G6K s APPROVALS UL (File No. E41515) / CSA (File No. LR24825) pending Type G6K-2F G6K-2G G6K-2P Contact form DPDT Coil rating 3 to 24 VDC Contact ratings 0.3A, 125VAC 0.5A, 60VDC 1A, 30VDC G6K Dimensions Unit: mm (inch) s RELAYS G6K-2F 10 ±0.2 (0.39) 5.0 ±0.3 (0.20) 1.4 (0.06) 0.5 (0.02) 2.54 (0.10) 8.2 (0.32) 0.1 (0.004) Orientation mark 7.2 2 (0.08) (0.28) 6.5 ±0.2 (0.26) Terminal arrangement/ Internal connections (top view) Mounting pads (top view) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 1 (0.04) 1.19 (0.05) G6K-2G Terminal arrangement/ Internal connections (top view) 10 ±0.2 (0.39) 5.0 ±0.3 (0.20) 0.5 (0.02) 2.54 (0.10) 4.5 (0.18) 6.5 ±0.2 (0.26) Mounting pads (top view) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 5.5 2 (0.22) (0.08) 2.54 (0.10) 0.1 (0.004) Orientation mark 1 (0.04) 1.19 (0.05) 1.4 (0.06) 2.54 (0.10) G6K-2P Terminal arrangement/ Internal connections (bottom view) 10 ±0.2 (0.39) 5.0 ±0.3 0.1 (0.20) (0.004) 0.5 (0.02) 3.5 (0.14) 0.4 (0.02) 2.54 (0.10) R0.2 2.54 (0.10) 2.54 (0.10) 5.08 (0.20) 0.15 (0.01) 6.5 ±0.2 (0.26) Orientation mark 2.54 (0.10) Mounting holes (bottom view) 2.54 (0.10) Eight, 0.8-dia. holes 5.08 ±0.1 (0.20) 0.71 (0.03) 1.19 (0.05) 7.62 ±0.1 (0.30) 3 G6K s ACCESSORIES G6K Relays in tube packing are arranged so that the orientation mark of each Relay is on the left side. Be sure to reference Relay orientation when mounting the Relay to the PCB. Tube packing Tape packing Standard nomenclature When ordering, add "TR" before the rated coil voltage (e.g., G6K-2G-TR-DC5) Note: TR is not part of the relay model number and will not be marked on the relay 50 pcs per anti-static tube s TAPE AND REEL DIMENSIONS q Tape type: ETX7200 (EIAJ - Electronic Industrial Association of Japan) 16mm tape meets EIA Standards 5.6mm pocket depth 12mm pitch 4mm sproket pitch Reel type: RPM-16D (EIAJ), 330mm Relays per reel: 900 3. Carrier Tape Dimensions G6K-2F Orientation mark Top tape (cover tape) Pulling direction q q q 1. Direction of Relay Insertion Carrier tape Emboss tape 2. Reel Dimensions G6K-2G OMRON ELECTRONICS, INC. One East Commerce Drive Schaumburg, IL 60173 OMRON CANADA, INC. 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON Cat. No. K106-E3-1 4 7/98/5M Specifications subject to change without notice. 416-286-6465 Printed in the U.S.A.