Description
FY Series FYD TYPE: SMALL DIAMETER, EXCELLENT VOLTAGE HOLDING CHARACTERISTICS FYH, and FYL TYPE: LOW PROFILE, EXCELLENT VOLTAGE HOLDING CHARACTERISTICS The FY series includes small-size electric double-layer capacitors with excellent voltage holding characteristics. The FYD type occupies only a small area on a printed circuit board, and the FYH and FYL types feature a low profile in height, so that they can be used in various systems. These capacitors are ideal as long-time backup devices for minute-current loads in small and lightweight systems. Features • Product variety makes the FYD, FYH, and FYL types suitable for use in many types of application systems. • Excellent voltage holding characteristics ideal for backup of 1 μ A to several hundred μ A. • Smaller than other Super Capacitors (25% Iess than FS series in volume) • Capacitance ranges from low to high (0.01 F to 2.2 F). Applications • Backup of CMOS microcomputers, static RAMs, DTSs (digital tuning systems) • Memory backup of remote controllers and handy cassette player during battery exchange Part Number System FYD 0H 473 Z F Environmental Impact Reduced Product Capacitance tolerance: Z: +80%, –20% Capacitance: 0.047 F First two digits represent significant figures. Third digit specifies number of zeros to follow μ F code. Maximum Operating voltage: 0H: 5.5 VDC Super Capacitor : FY series type FYD : Small-diameter type FYH and FYL : Low-profile type www.DataSheet4U.com Super Capacitors Vol.07 33 Markings Marking of sleeve Sleeve Date code V5 001 FYD 5.5V 0.047F V5 FYD 5.5V 0.047F Lead terminal connected to the metal can case Negative polarity Negative polarity identification mark Dimensions and Standard Ratings ● FYD-Type L Min. 0.3 MÍin. H Max. Dimensions mm (inch) Part No. D H P d1 d2 L Weight g (oz) Sleeve 11.5 8.5 5.08 0.4 1.2 2.7 1.6 FYD0H223ZF (0.453) (0.335) (0.200) (0.016) (0.047) (0.106) (0.056) 11.5 8.5 5.08 0.4 1.2 2.7 1.7 FYD0H473ZF (0.453) (0.335) (0.200) (0.016) (0.047) (0.106) (0.058) 13.0 8.5 5.08 0.4 1.2 2.2 2.4 FYD0H104ZF (0.512) (0.335) (0.200) (0.016) (0.047) (0.087) (0.085) 14.5 15.0 5.08 0.4 1.2 2.4 4.3 FYD0H224ZF (0.571) (0.591) (0.200) (0.016) (0.047) (0.095) (0.152) P± 0.5 φ D ± 0.5 d 1± 0.1 16.5 15.0 5.08 0.4 1.2 2.7 6.0 FYD0H474ZF (0.65) (0.591) (0.200) (0.016) (0.047) (0.106) (0.212) 21.5 16.0 7.62 0.6 1.2 3.0 11.0 FYD0H105ZF (0.85) (0.629) (0.300) (0.024) (0.047) (0.118) (0.338) d 2± 0.1 21.5 19.0 7.62 0.6 1.2 3.0 12.0 FYD0H145ZF (0.85) (0.748) (0.300) (0.024) (0.047) (0.118) (0.424) 28.5 22.0 10.16 0.6 1.4 6.1 22.9 FYD0H225ZF (1.122) (0.866) (0.400) (0.024) (0.055) (0.240) (0.809) Note: Weight is typical. www.DataSheet4U.com Lead (case) Negative polarity Lead Part Number Max. Operating Voltage (V) 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 Nominal Capacitance Charge System (F) 0.022 0.047 0.10 0.22 0.47 1.0 1.4 2.2 Discharge System (F) 0.033 0.070 0.14 0.35 0.75 1.6 2.1 3.3 Max. ESR (at 1 kHz) (Ω) 220 220 100 120 65 35 45 35 Max. Current at 30 minutes (mA) 0.033 0.071 0.15 0.33 0.71 1.5 2.1 3.3 Voltage Holding Characteristic Min. (V) 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 FYD0H223ZF FYD0H473ZF FYD0H104ZF FYD0H224ZF FYD0H474ZF FYD0H105ZF FYD0H145ZF FYD0H225ZF 34 Super Capacitors Vol.07 ● FYH-Type L Min. H Max. 0.3 Min. Dimensions mm (inch) Part No. D H P d1 d2 L Weight g (oz) Sleeve P ± 0.5 11.5 7.0 5.08 0.4 1.2 2.7 1.5 FYH0H223ZF (0.453) (0.276) (0.200) (0.016) (0.047) (0.106) (0.053) 13.0 7.0 5.08 0.4 1.2 2.2 2.2 FYH0H473ZF (0.512) (0.276) (0.200) (0.016) (0.047) (0.087) (0.078) 16.5 7.5 5.08 0.4 1.2 2.7 3.4 FYH0H104ZF (0.65) (0.295) (0.200) (0.016) (0.047) (0.106) (0.120) 16.5 9.5 5.08 0.4 1.2 2.7 3.6 FYH0H224ZF (0.65) (0.374) (0.200) (0.016) (0.047) (0.106) (0.127) 21.5 10.0 7.62 0.6 1.2 3.0 7.2 FYH0H474ZF (0.85) (0.394) (0.300) (0.024) (0.047) (0.118) (0.255) d 2 ± 0.1 φ D ± 0.5 d 1 ± 0.1 28.5 11.0 10.16 0.6 1.4 6.1 13.9 FYH0H105ZF (1.122) (0.433) (0.400) (0.024) (0.055) (0.240) (0.491) Note: Weight is typical. Lead (case) Lead – Negative polarity Part Number Max. Operating Voltage (V) 5.5 5.5 5.5 5.5 5.5 5.5 Nominal Capacitance Charge System (F) 0.022 0.047 0.10 0.22 0.47 1.0 Discharge System (F) 0.033 0.075 0.16 0.30 0.70 0.50 Max. ESR (at 1 kHz) (Ω) 200 100 50 60 35 20 Max. Current at 30 minutes (mA) 0.033 0.071 0.15 0.33 0.71 1.5 Voltage Holding Characteristic Min. (V) 4.2 4.2 4.2 4.2 4.2 4.2 FYH0H223ZF FYH0H473ZF FYH0H104ZF FYH0H224ZF FYH0H474ZF FYH0H105ZF www.DataSheet4U.com Super Capacitors Vol.07 35 ● FYL-Type L Min. 0.3 Min. Sleeve H±0.5 Dimensions mm (inch) P ± 0.5 Weight L g (oz) Part No. D H P d1 d2 φ D ± 0.5 d 1 ± 0.1 11.0 5.0 5.08 0.2 1.2 2.7 0.9 FYL0H103ZF (0.43) (0.197) (0.200) (0.016) (0.047) (0.106) (0.032) 11.0 5.0 5.08 0.2 1.2 2.7 1.0 FYL0H223ZF (0.43) (0.197) (0.200) (0.016) (0.047) (0.106) (0.035) 12.0 5.0 5.08 0.2 1.2 2.7 1.2 FYL0H473ZF (0.47) (0.197) (0.200) (0.016) (0.047) (0.106) (0.042) d 2 ± 0.1 Note: Weight is typical. Lead (case) Lead – Negative polarity Part Number Max. Operating Voltage (V) 5.5 5.5 5.5 Nominal Capacitance Charge System (F) 0.010 0.022 0.047 Discharge System (F) 0.013 0.028 0.061 Max. ESR (at 1 kHz) (Ω) 300 200 200 Max. Current at 30 minutes (mA) 0.015 0.033 0.071 Voltage Holding Characteristic Min. (V) 4.2 4.2 4.2 FYL0H103ZF FYL0H223ZF FYL0H473ZF www.DataSheet4U.com 36 Super Capacitors Vol.07 Specifications: FY Series Items Operating Temperature Range Maximum Operating Voltage Nominal Capacitance Range Capacitance Allowance Equivalent Series R esistance Current (30-minutes Value) Specifications –25˚C to +70˚C 5.5 Vdc Refer to standard ratings +80 %, –20 % Refer to standard ratings Refer to standard ratings Capacitance More than 90 % of initial requirement Equivalent Series Resistance Less than 120% of initial requirement Current at 30 minutes Less than 120% of initial requirement Test Conditions Conforming to JIS C 5102-1994 Surge Voltage Appearance No obvious abnormality Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Capacitance Equivalent Series Resistance Capacitance Equivalent Series Resistance Current at 30 minutes Capacitance Equivalent Series Resistance Current at 30 minutes More than 50 % of initial value Less than 400% of initial value Less than 200% of initial value Initial requirement Less than 1.5 CV (mA) Within ± 20% of initial value Initial requirement Initial requirement Refer to characteristics measuring conditions Refer to characteristics measuring conditions Refer to characteristics measuring conditions Conforms to 7.14 Surge voltage: 6.3 V Temperature: 70 ± 2˚C Charging for 30 seconds Discharging for 9 min. 30 sec. Number of cycles 1 000 cycles Charge resistance : 0.01 F 1500 Ω 0.47 F 30 Ω 0.022 F 560 Ω 1.0 F 15 Ω 0.047 F 300 Ω 1.4 F 15 Ω 0.10 F 150 Ω 2.2 F 10 Ω 0.22 F 56 Ω No discharge resistance Conforms to 7.12 Phase 1: +25 ±2˚C Phase 2: –25 ±2˚C Phase 3: –40 ±2˚C Phase 4: +25 ±2˚C Phase 5: +70 ±2˚C Phase 6: +25 ±2˚C Lead Strength (Tensile) No loosening nor permanent damage of the leads Vibration Resistance Capacitance Equivalent Series Resistance Current at 30 minutes Appearance Meet initial requirements No obvious abnormality Conforms to 8.1.2 (1) FYD0H105Z ⎫ ⎪ FYD0H145Z ⎪ ⎪ FYD0H225Z ⎬: 2.5 kg-f 10 ± 1 sec. ⎪ FYH0H474Z ⎪ ⎪ FYH0H105Z ⎭ Others: 1.0 kg-f 10 ± 1 sec. Conforms to 8.2.3 Frequency: 10 to 55 Hz Time of test: 6 hours Conforms to 8.4 Temperature of solder: 245 ± 5˚C Time of immersion: 5 ± 0.5 second To immerse capacitors up to 1.6 mm from the bottom Conforms to 8.5 Temperature of solder: 260 ± 10˚C Time of immersion: 10 ± 1 seconds To immerse capacitors up to 1.6 mm from the bottom Conforms to 9.3 Temperature condition: –25˚C → normal temperature → +70˚C → normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 ± 2˚C Humidity: 90 to 95% RH Time of test: 240 ± 8 hours Conforms to 9.10 Temperature: 70 ± 2˚C Series resistance: 0 Ω Applied voltage: 5.5 VDC Time of test: 1000 +48 hours –0 Charging condition Applied voltage: 5.0 VDC Series resistance: 0 Ω Curging time: 24 hours Load: Nothing Temperature: Lower than 25˚C Humidity: Lower than 70% RH Time: 24 hours Solderability 3/4 or more of the pin of surface should be covered with the solder Capacitance Equivalent Series Resistance Current at 30 minutes Appearance Capacitance Equivalent Series Resistance Current at 30 minutes Visual appearance Capacitance Equivalent Series Resistance Current at 30 minutes Appearance Capacitance Equivalent Series Resistance Current at 30 minutes Appearance Soldering Heat Resistance Meet initial requirements No obvious abnormality Shall meet initial requirements No obvious abnormality Within ±20% of initial value Less than 120% of initial requirement Less than 120% of initial requirement No obvious abnormality Within ±30% of initial value Less than 200% of initial requirement Less than 200% of initial requirement No obvious abnormality www.DataSheet4U.com Temperature Cycle Humidity Resistance High Temperature Load Voltage Holding Characteristics (Self Discharge) Voltage between terminal leads higher than 4.2 V. Storage Super Capacitors Vol.07 37

Part Number
FYH0HxxxZF

Free Sample / Buy Component / Product Information
Locate Part FYH0HxxxZF

Datasheet
Locate DataSheet

FYH0HxxxZF Cross Reference : Jump New Window
Get Cross-Reference Datasheet