Description
OPTREX LCD Module Technical Specification 4U t . om c First Edition Oct 3, 2002 Final Revision Type No. w w w .D ta a S F-51553GNBJ-LW-AB Approved by (Production Div.) Checked by (Quality Assurance Div.) h ee ****** Checked by (ACI Engineering Div.) Prepared by (Production Div.) Table of Contents 1. General Specifications .................................................................................................................................. 2 2. Electrical Specifications ............................................................................................................................... 3 3. Optical Specifications ................................................................................................................................. 12 4. I/O Terminal.................................................................................................................................................... 14 5. Test................................................................................................................................................................... 17 6. Appearance Standards................................................................................................................................ 18 7. Code System of Production Lot............................................................................................................... 22 8. Type Number.................................................................................................................................................. 22 9. Applying Precautions .................................................................................................................................. 22 10. Precautions Relating Product Handling................................................................................................ 23 11. Warranty ........................................................................................................................................................ 24 Revision History Rev. Date w w w .D Page t a S a e h t e U 4 .c m o Comment F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION w w w .D at Sh a et e 4U . om c Page 1/24 1. General Specifications Operating Temp. Storage Temp. Dot Pixels Dot Size Dot Pitch Viewing Area Outline Dimensions : : : : : : : min. -20°C ~max. 70°C min. -30°C ~max. 85°C 128 (W) •~ 64 (H) dots 0.48 (W) •~ 0.48 (H) mm 0.50 (W) •~ 0.50 (H) mm 66.8 (W) •~ 35.5 (H) mm 89.7 (W) •~49.8* (H) •~ 6.0 (D) mm * Without FPCUV 33.0g max. NTD-21558 ( STN / Blue-mode / Transmissive ) 6:00 8-bit parallel data transfer Serial data transfer LED Backlight / White Dimensional Outline UE-311234A Weight LCD Type : : Viewing Angle Data Transfer : : Backlight Drawings : : F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 2/24 2. Electrical Specifications 2.1. Absolute Maximum Ratings GND=0V Parameter Supply Voltage (Logic) Supply Voltage (Booster Circuit) Supply Voltage 1 (LCD Drive) Input Voltage Symbol VDD-GND VDD-GND V5,VOUT VIN Conditions Min. -0.3 -6.0 -18.0 -0.3 Max. 7.0 +0.3 +0.3 VDD+0.3 Units V V V V 2.2. DC Characteristics Ta=25°C, GND=0V Parameter Supply Voltage (Logic) Supply Voltage (LCD Drive) "High" Level Input Voltage "Low" Level Input Voltage "High" Level Output Voltage "Low" Level Output Voltage Supply Current Symbol VDD-GND VDD-V5 VIH VIL VOH VOL IDD IOH=-0.1mA IOL=0.1mA VDD-GND=5.0V Conditions With Triple Min. 4.5 Typ. Max. 5.5 Units V V 0.84 VDD 0.2•~ VDD VDD 0.2•~ VDD 1.26 V V V V mA Shown in 3.1 0.8•~ VDD GND 0.8•~ VDD GND - F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 3/24 2.3. AC Characteristics 2.3.1. Read/Write Operation Sequence (80 series CPU) VDD=5.0V±10% Parameter Address Setup Time Address Hold Time System Cycle Time Control Low Pulse Width WRITE READ Control High Pulse Width WRITE READ Data Setup Time Data Hold Time RD Access Time Output Disable Time Symbol Min. 0 0 166 30 70 30 30 30 10 5 Max. 70 50 Units ns ns ns ns ns ns ns ns ns ns ns tAW8 tAH8 tCYC8 tCCLW tCCLR tCCHW tCCHR tDS8 tDH8 tACC8 tOH8 tAH8 A0 CS1 (CS2=”1”) tAW8 tCCLR, tCCLW WR, RD tf D0~D7 (WRITE) tACC8 D0~D7 (READ) tOH8 tDS8 tr tCCHR, tCCHW tDH8 tCYC8 F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 4/24 2.3.2. Read/Write Operation Sequence (68 series CPU) VDD=5.0V±10% Parameter Address Setup Time Address Hold Time System Cycle Time Data Setup Time Data Hold Time Access Time (CL=100pF) Output Disable Time Enable High Pulse Width READ WRITE Enable Low Pulse Width READ WRITE Symbol Min. 0 0 166 30 10 10 70 30 30 30 Max. 70 50 Units ns ns ns ns ns ns ns ns ns ns ns tAH6 tAW6 tCYC6 tDS6 tDH6 tACC6 tOH6 tEWHR tEWHW tEWLR tEWLW CS1 (CS2=”1”) tCYC6 tEWLR, tEWLW E tEWHR, tEWHW tAW6 tr tf tAH6 A0,WR,RD tDS6 D0∼D7 (WRITE) tACC6 D0∼D7 (READ) tOH6 tDH6 F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 5/24 2.3.3. Serial Interface Sequence VDD=5.0±10% Parameter Serial Clock Cycle Time Serial Clock High Pulse Width Serial Clock Low Pulse Width Address Setup Time Address Hold Time Data Setup Time Data Hold Time Chip Select Setup Time Chip Select Hold Time Symbol Min. 200 75 75 50 100 50 50 100 100 Max. Units ns ns ns ns ns ns ns ns ns tSCYC tSHW tSLW tSAS tSAH tSDS tSDH tCSS tCSH tCSS CS1 (CS2=”1”) tSAS A0 tSCYC tSLW SCL tf tSDS tr tSAH tCSH t SHW tSDH SI F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 6/24 2.3.4. Display Control Timing Characteristics Reset Input Timing Parameter Reset time Reset ”L” Pulse Width Output Timing Parameter FR Delay Time Symbol Min. Typ. 10 Max. 40 Symbol Min. 0.5 Typ. Max. 0.5 VDD=5.0±10% Units µs tR tRW VDD=5.0±10% Units ns tDFR Note 1 :Valid only when the master mode is selected. Note 2:All timing is based on 20% and 80% of Vss. RES t RW Internal states During reset tR Reset complete F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 7/24 F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 8/24 F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 9/24 F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 10/24 2.4. Lighting Specifications 2.4.1. Absolute Maximum Ratings Ta=25°C (1Unit) Parameter Foward Current Reverse Voltage LED Power Dissipation Symbol IF VR PD Conditions Note 1 Min. Typ. Max. 75 8 0.375 Units mA V W Note 1 : Refer to the foward current derating curve. IF (mA) 75 30 -20 25 70 Ta (°C) •{ ANODE •| CATHODE 2.4.2. Operating Characteristics Ta=25°C Parameter Foward Voltage Luminance of Backlight Surface Symbol VF L Conditions IF=40mA IF=40mA Min. 65 Typ. 5.0 100 Max. Units V cd/m2 F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 11/24 3. Optical Specifications 3.1. LCD Driving Voltage Parameter Recommended LCD Driving Voltage Note 1 VDD-V5 Symbol Conditions Ta= -20°C Ta=25°C Ta=70°C Min. 7.8 7.4 Typ. 8.5 Max. 9.1 9.1 Units V V V Note 1 : Voltage (Applied actual waveform to LCD Module) for the best contrast. The range of minimum and maximum shows tolerance of the operating voltage. The specified contrast ratio and response time are not guaranteed over the entire range. 3.2. Optical Characteristics Ta=25°C, 1/65 Duty, 1/7 Bias, VOD=8.5V (Note 4), θ= 0°, φ= - ° Parameter Contrast Ratio Viewing Angle Response Time Rise Note 2 Decay Note 3 TON TOFF Note 1 Symbol CR Conditions θ= 0°, φ= - ° Min. Typ. 8 Max. Units Shown in 3.3 160 190 240 290 ms ms Note 1 :Contrast ratio is definded as follows. (CR = LON / LOFF) LON : Luminance of the ON segments LOFF: Luminance of the OFF segments Mesuring Spot : 3mmφ Note 2 :The time that the luminance level reaches 90% of the saturation level from 0% when ON signal is applied. Note 3 :The time that the luminance level reaches 10% of the saturation level from 100% when OFF signal is applied. Note 4 :Definition of Driving Voltage VOD VOD=VCC-VADJ-VBE Assuming that the typical driving waveforms shown below are applied to the LCD Panel at 1/A Duty - 1/B Bias (A: Duty Number, B: Bias Number). Driving voltage VOD is definded as the voltage VO-P when the contrast ratio (CR=LON / LOFF) is at its maximum. VO-P ( B-2 )× VO-P / B 1/ ( f F ×A ) 1 / fF <ON SIGNAL> <OFF SIGNAL> F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 12/24 3.3. Definition of Viewing Angle and Optimum Viewing Area *Point • shows the point where contrast ratio is measured. : θ= 0°, φ= -° *Driving condition: 1/65 Duty, 1/7 Bias, VOD=8.5V, fF=84.6Hz 90° 135° 45° φ 180° ( φ = 0°) θ 90° 10 20 30 40 50 θ 180° φ 0° 225° 270° 315° 270° *Area shows typ. CR≥3 (Mesuring Spot : 3mmφ) 3.4. System Block Diagram Temperature Chamber Rotation Table ( θ,φ ) Photometer #1980A WB φ LCD Optical Fiber θ Computer Control Unit & Waveform Generator Halogen bulb F-51553GNBJ-LW-AB (AB) No. 2002-0243 OPTREX CORPORATION Page 13/24 4. I/O Terminal 4.1. Pin Assignment CN1 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol CS1 RES A0 WR RD D0 D1 D2 D3 D4 D5 D6 D7 VDD GND VOUT CAP3CAP1+ CAP1CAP2CAP2+ V1 V2 V3 V4 V5 VR C86 P/S IRS Chip Select Signal L : Active Reset Signal L : Reset H : D0~D7 are Display Data L : D0~D7 are Instructions Write Signal L : Active Read Signal L : Active Data Bus Line Data Bus Line Data Bus Line Data Bus Line Data Bus Line Data Bus Line Data Bus Line Data Bus Line Power Supply for Logic Power Supply ( 0V, GND ) DC/DC Voltage Converter Output DC/DC Voltage Converter Negative Connection DC/DC Voltage Converter Positive Connection DC/DC Voltage Converter Negative Connection DC/DC Voltage Converter Negative Connection DC/DC Voltage Converter Positive Connection Power Supply for LCD Drive V1 = 1/7,V5 Power Supply for LCD Drive V2 = 2/7,V5 Power Supply for LCD Drive V3 = 5/7,V5 Power Supply for LCD Drive V4 = 6/7,V5 Power Supply

Part Number
F-51533GNBJ-LW-AB

Free Sample / Buy Component / Product Information
Locate Part F-51533GNBJ-LW-AB

Datasheet
Locate DataSheet

F-51533GNBJ-LW-AB Cross Reference : Jump New Window
Get Cross-Reference Datasheet