NPN Epitaxial Planar Silicon Transistor

www.DataSheet4U.com Ordering number : ENA0075 EC4201KF NPN Epitaxial Planar Silicon Transistor EC4201KF Applications • Low-Frequency General-Purpose Amplifier Applications Low-frequency Amplifier, muting circuit. Features • • • Large current capacitance. Mounting height: 0.4mm. Small ON-resistance (Ron). Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Conditions Ratings 20 15 5 500 1.0 Mounted on a glass-epoxy printed circuit board 0.4 150 --55 to +150 Unit V V V mA A W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO Conditions VCB=15V, IE=0A VEB=4V, IC=0A VCE=2V, IC=10mA VCE=2V, IC=50mA VCB=10V, f=1MHz IC=200mA, IB=10mA IC=200mA, IB=10mA IC=10µA, IE=0A IC=1mA, RBE=∞ IE=10µA, IC=0A 20 15 5 Ratings min typ max 0.1 0.1 300 330 3.2 150 0.9 300 1.2 800 MHz pF mV V V V V Unit µA µA Marking : JA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 83005EA MS IM TB-00001613 No. A0075-1/4 EC4201KF Continued from preceding page. Parameter Turn-ON Time Storage Time Fall Time Symbol ton tstg tf Conditions See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min typ 30 77 40 max Unit ns ns ns Package Dimensions unit : mm 7043-003 Top View 0.8 Electrical Connection (Top view) Polarity mark (Top) Base 3 4 1.2 Cathode Emitter *Electrodes : on the bottom 1 2 Polarity Discriminating Mark 0.4 0.5 0.2 0.3 1 0.75 2 4 Bottom View 3 1 : Base 2 : Emitter 3 : Collector 4 : Collector SANYO : ECSP1208-4-F Switching Time Test Circuit IB1 OUTPUT IB2 VR 50Ω + 220µF VBE= --5V + 470µF VCC=5V RB PW=20µs D.C.≤1% INPUT RL IC=20IB1= --20IB2=500mA No. A0075-2/4 EC4201KF 200 IC -- VCE 0.9 mA 0.8m A 800 IC -- VBE VCE=2V 180 0.7mA 700 Collector Current, IC -- mA Collector Current, IC -- mA 160 0.6mA 1.0mA 140 120 100 80 0.5mA 600 500 400 300 200 100 0.4mA 0.3mA 0.2mA 60 40 20 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1mA IB=0mA 1.8 2.0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT05491 Collector-to-Emitter Voltage, VCE -- V 1000 7 5 IT05490 1000 hFE -- IC Base-to-Emitter Voltage, VBE -- V VCE(sat) -- IC VCE=2V 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 25°C 5 3 2 DC Current Gain, hFE Ta=75°C 3 2 --25°C 100 7 5 3 2 100 7 5 3 1.0 = Ta °C 75 C 5° --2 °C 25 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 1000 7 5 7 1000 IT05492 10 1.0 2 3 5 7 10 2 3 5 7 100 5°C 25°C --25 °C IC / IB=20 2 3 5 7 1000 IT05493 VCE(sat) -- IC Collector Current, IC -- mA 10000 7 VBE(sat) -- IC IC / IB=20 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 5 3 2 100 7 5 3 2 = Ta 75 °C 1000 7 5 3 2 Ta= --25°C 75°C 25°C 5°C --2 °C 25 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 10 5 7 1000 IT05494 100 1.0 2 3 5 7 10 2 3 5 7 100 Ta= 7 2 3 Cob -- VCB f=1MHz Collector Current, IC -- mA 7 5 7 1000 IT05495 fT -- IC VCE=2V Gain-Bandwidth Product, fT -- MHz 2 3 5 7 1.0 2 3 5 7 2 3 Output Capacitance, Cob -- pF 7 5 5 3 2 3 2 100 7 5 1.0 1.0 0.1 10 2 3 5 7 10 2 3 5 7 100 2 3 Collector-to-Base Voltage, VCB -- V IT05497 Collector Current, IC -- mA 5 7 1000 IT05496 No. A0075-3/4 EC4201KF 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 0.1 0 2 3 5 7 1.0 2 3 5 7 Ron -- IB f=1MHz 1kΩ IN 1kΩ IB OUT Collector Dissipation, PC -- W 0.5 PC -- Ta 0.4 ON-resistance, Ron -- Ω 0.3 0.2 0.1 Base Current, IB -- mA 10 IT06067 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- °C IT10110 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2005. Specifications and information herein are subject to change without notice. PS No. A0075-4/4