DIGITAL TRANSISTORS

www.DataSheet4U.com UNISONIC TECHNOLOGIES CO., LTD DTA123E PNP EPITAXIAL SILICON TRANSISTOR 3 DIGITAL TRANSISTORS (BUILT- IN BIAS RESISTORS) FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow positive input. 2 3 1 SOT-23 EQUIVALENT CIRCUIT R1 IN R2 OUT 2 3 1 SOT-323 2 GND IN GND OUT 1 SOT-523 *Pb-free plating product number:DTA123EL ORDERING INFORMATION Order Number Normal Lead Free Plating DTA123E-AE3-6-R DTA123EL-AE3-6-R DTA123E-AL3-6-R DTA123EL-AL3-6-R DTA123E-AN3-6-R DTA123EL-AN3-6-R Package SOT-23 SOT-323 SOT-523 Pin Assignment 1 2 3 G I O G I O G I O Packing Tape Reel Tape Reel Tape Reel DTA123EL-AE3-6-R (1)Packing Type (2)Pin Assignment (3)Package Type (4)Lead Plating (1) R: Tape Reel (2) refer to Pin Assignment (3) AE3: SOT-23, AL3: SOT-323, AN3: SOT-523 (4) L: Lead Free Plating, Blank: Pb/Sn MARKING AC3 www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 3 QW-R206-086,A DTA123E PARAMETER Supply Voltage Input Voltage Output Current PNP EPITAXIAL SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°C) RATINGS UNIT -50 V -12 ~ +10 V -100 mA SOT-523 150 mW Power Dissipation PD SOT-23/SOT-323 200 mW Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCC VIN IOUT ELECTRICAL SPECIFICATIONS (Ta=25°C) SYMBOL VIN(OFF) Input Voltage VIN(ON) Output Voltage VOUT(ON) Input Current IIN Output Current IOUT(OFF) DC Current Gain GIN Input Resistance R1 Resistance Ratio R2/R1 Transition Frequency fT * Transition frequency of the device PARAMETER TEST CONDITIONS VCC =-5V, IOUT =-100µA VOUT =-0.3V, IOUT =-20mA IOUT/IIN =10mA/-0.5mA VIN=-5V VCC =-50V, VIN =0V VOUT =-5V, IOUT =-20mA MIN -3 -0.1 -0.3 -3.8 -0.5 2.86 1.2 TYP MAX -0.5 UNIT V V mA µA KΩ MHz 20 1.54 0.8 VCE =-10V, IE =−5mA, f=100MHz * 2.2 1 250 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R206-086,A DTA123E TYPICAL CHARACTERISTIC Input Voltage vs. Output Current (ON Characteristics) 100 50 Input Voltage, VIN (ON) (V) PNP EPITAXIAL SILICON TRANSISTOR Output Current vs. Input Voltage (OFF Characteristics) 10m 5m 2m 1m Output Current, IOUT (A) VOUT=-0.3V VCC=-5V 20 10 5 2 1 500m 200m 100m -100μ-200μ -500μ -1m -2m -5m -10m -20m -50m -100m Ta=-40℃ 25℃ 100℃ 500μ 200μ 100μ 50μ 20μ 10μ 5μ 2μ 1μ 0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 Ta=100℃ 25℃ -40℃ Output Current, IOUT (A) Input Voltage, VI(OFF) (V) DC Current Gain vs. Output Current 1K 500 200 VOUT=-5V 1 500m 200m Ta=100℃ 25℃ -40℃ Output Voltage vs. Output Current lOUT/lIN=20 DC Current Gain, GI Output Voltage, VOUT(ON) (V) 100 50 20 10 5 2 1 - 100μ-200 μ -500 μ -1 m -2m -5m -10m -20m - 50m -100m 100m 50m 20m 10m 5m 2m 1m - 100μ-200 μ -500 μ -1 m -2m -5m -10m -20m - 50m -100m Ta=100℃ 25℃ -40℃ Output Current, IOUT (A) Output Current, I OUT (A) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-086,A