www.DataSheet4U.com
Ordering number : ENN7400
CPH6521
PNP/NPN Epitaxial Planar Silicon Composite Transistors
CPH6521
Low-Frequency General-Purpose Amplifier, Drivers Applications
Features
•
Package Dimensions
unit : mm 2187
[CPH6521]
6 5 4
•
• • •
Composite type with 2 transistors contained in the CPH package currently in use, improving the mounting efficiency greatly. The CPH6521 is formed with two chips, being equivalent to the 2SA1813 / 2SC3689, placed in one package. Adoption of FBET process. High DC current gain. High VEBO.
0.6
0.05
1
2
0.4
Specifications
( ) : PNP Absolute Maximum Ratings at Ta=25°C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Total Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC PT Tj Tstg 1unit Conditions
0.7 0.9
0.2
3 0.95
0.6
1.6
2.8
1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : CPH6
Ratings (--30)60 (--25)50 (--)15 (--150)100 (--300)200 (--30)20 350 500 150 --55 to +150
0.2
2.9
0.15
Unit V V V mA mA mA mW mW °C °C
Electrical Characteristics at Ta=25°C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Symbol ICBO IEBO hFE Conditions VCB=(--20)40V, IE=0 VEB=(--)10V, IC=0 VCE=(--)5V, IC=(--)1mA 800 (500) 1500 (800) Ratings min typ max (--)0.1 (--)0.1 3200 (1200) Unit µA µA
Marking : 3H
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
32603 TS IM TA-100423 No.7400-1/5
CPH6521
Continued from preceding page.
Parameter Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO Conditions VCE=(--)10V, IC=(--)10mA VCB=(--)10V, f=1MHz IC=(--)50mA, IB=(--)1mA IC=(--)50mA, IB=(--)1mA IC=(--)10µA, IE=0 IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0 (-30)60 (-25)50 (-)15 Ratings min typ (210)200 (2.6)1.5 (--0.15)0.1 (--0.78)0.8 (--)0.3 (--)1.1 max Unit MHz pF V V V V V
Note : The specifications shown above are for each individual transistors.
Electrical Connection
C1 B2 E2
TR1
TR2
TR1=PNP TR2=NPN
E1 B1 C2
(Top view)
--100
IC -- VCE
From top --500µA --450µA --400µA --350µA --300µA
[TR1]
100
IC -- VCE
From top 500µA 450µA 400µA 350µA
[TR2]
Collector Current, IC -- mA
--250µA
--200µA --150µA
Collector Current, IC -- mA
--80
80
300µA 250µA 200µA
150µA 100µA
--60
60
--100µA
--40
40
50µA
--50µA
--20
20
0 0 --0.4 --0.8 --1.2 --1.6
IB=0
--2.0 ITR10605
0 0 0.2 0.4 0.6 0.8
IB=0
1.0 ITR10606
Collector-to-Emitter Voltage, VCE -- V
--10
IC -- VCE
Collector-to-Emitter Voltage, VCE -- V
20
[TR1]
IC -- VCE
[TR2]
Collector Current, IC -- mA
--6
Collector Current, IC -- mA
--8
A 0µ --1 µA -9 A --8µ A --7µ A --6µ A --5µ
--4µA
16
12
--4
--3µA
8
10µA 9µA 8µA 7µA 6µA 5µA 4µA
3µA
--2µA
--2
--1µA
4
2µA
1µA
0 0 --4 --8
IB=0
--12 --16 --20 ITR10607
0 0 10 20
IB=0
30 40 50 ITR10608
Collector-to-Emitter Voltage, VCE -- V
Collector-to-Emitter Voltage, VCE -- V
No.7400-2/5
CPH6521
--200
IC -- VBE
[TR1]
120
IC -- VBE
[TR2] VCE=5V
VCE= --5V
Collector Current, IC -- mA Collector Current, IC -- mA
--160 100
80
--40°C
25°C
--80
Ta=1 2
60
40
--40
20
0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4
0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Base-to-Emitter Voltage, VBE -- V
5 3 2
ITR10609
hFE -- IC
Base-to-Emitter Voltage, VBE -- V
5
25°C --40°C
0°C
--120
Ta=120°C
ITR10610
[TR1] VCE= --5V
3 2
hFE -- IC
[TR2] VCE=5V
DC Current Gain, hFE
Ta=120°C
1000 7 5 3 2
25°C
--40°C
DC Current Gain, hFE
Ta=120°C 25°C --40°C
1000 7 5 3 2
100 7 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 ITR10611
100 7 7 1.0 2 3 5 7 10 2 3 5 7 100 2 ITR10612
Collector Current, IC -- mA
5
f T -- IC
Collector Current, IC -- mA
5
[TR1] VCE= --10V
Gain-Bandwidth Product, f T -- MHz
f T -- IC
[TR2] VCE=10V
Gain-Bandwidth Product, f T -- MHz
3 2
3 2
100 7 5
100 7 5
3 2 --1.0
3 2
2
3
5
7 --10
2
3
5
Collector Current, IC -- mA
10 7
7 --100 2 ITR10613
7 1.0
2
3
5
7
10
2
3
5
Cob -- VCB
Collector Current, IC -- mA
10 7
7 100 2 ITR10614
[TR1] f=1MHz
Output Capacitance, Cob -- pF
Cob -- VCB
[TR2] f=1MHz
Output Capacitance, Cob -- pF
5
5
3 2
3
2
1.0 7 5 --1.0
1.0 7 5
2
3
5
7
--10
2
3
5
7 --100 ITR10615
7
1.0
2
3
5
7
10
2
3
5
7
100
Collector-to-Base Voltage, VCB -- V
Collector-to-Base Voltage, VCB -- V
ITR10616
No.7400-3/5
CPH6521
2
VCE(sat) -- IC
[TR1] IC / IB=50
1.0 7
VCE(sat) -- IC
[TR2] IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
--1.0 7 5 3 2
Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
5 3 2
25°C
7 5 3 2 7 --1.0 2 3 5 7 --10 2 3 5
0.1 7 5 3 2
--0.1
2 Ta=1
0°C
Ta=120°C
--40°C
25°C
C --40°
7 --100 2 ITR10617
7 1.0
2
3
5
7
10
2
3
5
Collector Current, IC -- mA
--10 7
VBE(sat) -- IC
Collector Current, IC -- mA
10 7
7 100 2 ITR10618
[TR1] IC / IB=50
Base-to-Emitter Saturation Voltage, VBE(sat) -- V
VBE(sat) -- IC
[TR2] IC / IB=50
Base-to-Emitter Saturation Voltage, VBE(sat) -- V
5 3 2
5 3 2
--1.0 7 5 3 2 7 --1.0 2
25°C
Ta= --40°C
120°C
1.0 7 5 3 2
25°C
Ta= --40°C
120°C
3
5
7 --10
2
3
5
Collector Current, IC -- mA
5 3
7 --100 2 ITR10619
7 1.0
2
3
5
7
10
2
3
5
Collector Current, IC -- mA
3 2 0.1
7 100 2 ITR10620
ASO
ICP= --0.3A IC= --0.15A
[TR1] 500µs
s 1m ms
ASO
ICP=0.2A IC=0.1A
DC op era
[TR2] 300µs
1m s
s m ms 10 100
Collector Current, IC -- A
2
Collector Current, IC -- A
10
7 5 3 2 0.01 7 5 3 2
10
0.1 7 5 3 2
DC
op
tio
0m s
era
tio
nT a=
25
nT a=
°C
25 °C
0.01 1.0
2
3
5
7
10
2
3
0.001 1.0
2
3
5
7
10
2
3
5
7
Collector-to-Emitter Voltage, VCE -- V
600
IT05370
PC -- Ta
Collector-to-Emitter Voltage, VCE -- V
IT05369
Collector Dissipation, PC -- mW
500
400 350 300
to
ta
ld
iss
ip
200
1u
at
nit
io
n
100
0 0 25 50 75 100 125 150 175 IT05368
Ambient Temperature, Ta -- °C
No.7400-4/5
CPH6521
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2003. Specifications and information herein are subject to change without notice.
PS No.7400-5/5
