(CKD Series) Ceramic Capacitors

(1/4) 001-03 / 20020531 / e4614_ckd.fm Ceramic Capacitors Low ESL Feed Through SMD FEATURES • These small low-cost filters are used for meeting EMC requirements. • Can be used up to even higher frequencies due to low parasitic inductance. • Optimized for use as a noise bypass capacitors for signal and power source circuits. APPLICATIONS For digital and analog signal line noise bypassing signal line PRODUCT IDENTIFICATION CKD 510 X5R 1E 220 S (1) (2) (3) (4) (5) (6) (7) (1) Series name (2) Dimensions 110 310 510 3.2×1.25×0.85mm 3.2×1.6×1.6mm 2.0×1.25×0.85mm CKD Series (5) Nominal capacitance The capacitance is expressed in three digit codes and in units of pico farads (pF). The first and second digits identify the first and second significant figures of the capacitance. The third digit identifies the multiplier. R designates a decimal point. 220 101 222 473 22pF 100pF 2200pF 47000pF (3) Capacitance temperature characteristics www.DataSheet4U.com Temperature characteristics X5R Capacitance change ±15% Temperature range –55 to +85°C (6) Capacitance tolerance (4) Rated voltage Edc 1A 1C 1E 1H 10V 16V 25V 50V S +50, –20% (7) Packaging style T B Taping (reel) Bulk SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM L GND RECOMMENDED PC BOARD PATTERN (REFLOW) Through-hole GND ;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;; Signal line F Resist W IN OUT B C B GND • No polarity D E G T ;;; ;;; D 0.6 1.4 1.4 E 1.5 2.5 2.5 F 1 1 1 Dimensions in mm Application For Signal and Power Line For Power Line For Signal Line Type CKD510 CKD310 CKD110 L 2±0.2 3.2±0.2 3.2±0.2 W 1.25±0.2 1.6±0.2 1.25±0.2 T 0.85±0.15 1.8max. 0.85±0.15 B 0.2min. 0.2min. 0.2min. C 0.5±0.2 0.95±0.3 0.95±0.3 G 2.6 4.5 4.5 Weight(mg) 11 33 17 • For more information about products with other capacitance or other data, please contact us. • All specifications are subject to change without notice. (2/4) 001-03 / 20020531 / e4614_ckd.fm Ceramic Capacitors Low ESL Feed Through SMD ELECTRICAL CHARACTERISTICS FOR SIGNAL LINE CKD510 TYPE RATED VOLTAGE Edc: 50V Capacitance Tolerance (pF) (%) 22 +50, –20 47 +50, –20 100 +50, –20 220 +50, –20 470 +50, –20 1000 +50, –20 2200 +50, –20 4700 +50, –20 ∗ DC resistance value is between feed-through terminals. Rated current Idc(mA)max. 400 400 400 400 400 400 400 400 CKD Series Insulation resistance (MΩ)min. 1000 1000 1000 1000 1000 1000 1000 1000 DC resistance∗ (Ω)max. 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Part No. CKD510X5R1H220S CKD510X5R1H470S CKD510X5R1H101S CKD510X5R1H221S CKD510X5R1H471S CKD510X5R1H102S CKD510X5R1H222S CKD510X5R1H472S CKD110 TYPE RATED VOLTAGE Edc: 25V Capacitance Tolerance (pF) (%) 22 +50, –20 47 +50, –20 100 +50, –20 220 +50, –20 470 +50, –20 1000 +50, –20 2200 +50, –20 4700 +50, –20 10000 +50, –20 22000 +50, –20 47000 +50, –20 100000 +50, –20 ∗ DC resistance value is between feed-through terminals. Rated current Idc(mA)max. 200 200 200 200 200 200 200 200 500 500 500 500 Insulation resistance (MΩ)min. 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 DC resistance∗ (Ω)max. 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.3 0.3 0.3 0.3 Part No. CKD110X5R1E220S CKD110X5R1E470S CKD110X5R1E101S CKD110X5R1E221S CKD110X5R1E471S CKD110X5R1E102S CKD110X5R1E222S CKD110X5R1E472S CKD110X5R1E103S CKD110X5R1E223S CKD110X5R1E473S CKD110X5R1E104S FOR POWER LINE CKD510 TYPE RATED VOLTAGE Edc: 25V Capacitance Tolerance (pF) (%) 10000 +50, –20 22000 +50, –20 47000 +50, –20 100000 +50, –20 ∗ DC resistance value is between feed-through terminals. Rated current Idc(mA)max. 1000 1000 1000 1000 Insulation resistance (MΩ)min. 1000 1000 1000 1000 DC resistance∗ (Ω)max. 0.08 0.08 0.08 0.08 Part No. CKD510X5R1E103S CKD510X5R1E223S CKD510X5R1E473S CKD510X5R1E104S RATED VOLTAGE Edc: 10V Capacitance Tolerance (pF) (%) 1000000[1µF] +50, –20 ∗ DC resistance value is between feed-through terminals. Rated current Idc(mA)max. 1000 Insulation resistance (MΩ)min. 1000 DC resistance∗ (Ω)max. 0.08 Part No. CKD510X5R1A105S CKD310 TYPE RATED VOLTAGE Edc: 16V Capacitance Tolerance (pF) (%) 100000 +50, –20 220000 +50, –20 470000 +50, –20 1000000[1µF] +50, –20 ∗ DC resistance value is between feed-through terminals. Rated current Idc(mA)max. 2000 2000 2000 2000 Insulation resistance (MΩ)min. 100 100 100 100 DC resistance∗ (Ω)max. 0.04 0.04 0.04 0.04 Part No. CKD310X5R1C104S CKD310X5R1C224S CKD310X5R1C474S CKD310X5R1C105S • For more information about products with other capacitance or other data, please contact us. • All specifications are subject to change without notice. (3/4) 001-03 / 20020531 / e4614_ckd.fm Ceramic Capacitors Low ESL Feed Through SMD TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS COMPARISON WITH EXISTING PRODUCTS Excellent noise bypass effect is displayed in higher frequency range compared with ordinary chip capacitors. 10 CKD Series CKD110 TYPE 10 0 10 Attenuation (dB) 20 30 40 50 60 70 80 22nF 220pF 470pF 1000pF 2200pF 22pF 47pF 100pF 0 10 Attenuation (dB) 20 30 40 50 60 70 80 90 1 2 5 10 20 50 100 200 Frequency (MHz) 500 1000 2000 CKD110X5R1E222S Existing product (multilayer ceramic chip capacitor) 90 1 2 5 10 20 50 100 200 Frequency (MHz) 500 1000 2000 MEASURING CIRCUIT 50Ω EXAMPLES OF NOISE COUNTERMEASURE Purpose 1. Noise countermeasure on IC 2. Radiation noise power supply lines: Eliminates countermeasure on signals noise occurring on supply lines lines: Attenuates superfluous to assure a stable voltage high-frequency content of supply for proper IC operation. signals to prevent noise radiation. Type CKD310 CKD110, CKD510 (High capacity type product) DC filter Switching power supply AC filter 50Ω 1 1 2 IC IC I/O IC 1 • For more information about products with other capacitance or other data, please contact us. • All specifications are subject to change without notice. (4/4) 001-03 / 20020531 / e4614_ckd.fm Ceramic Capacitors Low ESL Feed Through SMD RELIABILITY AND TEST CONDITIONS Item Exterior Insulation resistance DC resistance (Rdc1, 2) CKD Series Reliability No remarkable abnormal exterior appearance. Minimum insulation resistance: 1000MΩ or 100MΩ • µF, whichever is smaller. Less than 10000pF: 600mΩ max. 10000pF min.: 300mΩ max. Test methods and test conditions Micrometer (×3) Measurement voltage: Rated voltage Voltage applied time: 60s Measurement current: 100mA max. Rdc1 Rdc2 Rdc2 Rdc1 Withstand voltage Capacitance No dielectric nor mechanical damages. Within specified tolerance Rated voltage 25V min. : 0.025 max. Dielectric dissipation factor Rated voltage 16V max.: 0.05 max. (tanδ) Solderability Cover more than 75% of the terminal electrode part with new solder. 25% of the part may have any pin hole or rough spot but they must not be concentrated in one location. Ceramic original surface indicated as A (hatched) must not be exposed due to any peeling or dissolving of the electrode part. Measurement voltage: 250% of rated DC voltage Voltage applied time: 1 to 5s Charge and discharge current: 50mA max. Measured frequency: 1kHz±10% Measured voltage Erms: 1± 0.2V Measured frequency: 1kHz±10% Measured voltage Erms: 1± 0.2V Solder: H63A (JIS Z 3282) Flux: Isopropyl alcohol solution (JIS K 8839) of Rosin (JIS K 5902) (25wt %) Solder temperature: 235±5°C Dipping: The terminal electrode must be immersed completely in solder. Dip time: 2±0.5s Temperature cycle∗ Leave the capacitor in each temperature of the following 1 to 4 steps for the specified time in order. Repeat this operation 5 times consecutively. Measure after leaving the sample at room temperature and humidity for 48±4h. Step Temperature (°C) Time (min) 1 –25±3 30±3 2 Room temperature 2 to 5 3 +85±2 30±3 Room temperature 2 to 5 4 Exterior No mechanical damage. Relative humidity: 90 to 95(%)RH Humidity Temperature: 40±2°C resistance∗ Capcitance Variance from previous test: ±10% max. (Normal state) tanδ Time: 500+24, –0h Max. 200% of specified initial value Insulation Minimum insulation resistance: 500MΩ or 10MΩ•µF, Measure after leaving the sample at room temperature and humidity for 48±4h. whichever is smaller. resistance DCresistance 1Ω max. (Rdc1, 2) High temperature Exterior No mechanical damage Temperature: 85±2°C resistance Voltage: 200% of rated DC voltage Capacitance Variance from previous test: ±12.5% max. Current: Rated current Max. 200% of specified initial value tanδ Insulation Minimum insulation resistance: 500MΩ or 50MΩ•µF, Time: 1000+48, –0h Charge and discharge current: 50mA max. whichever is smaller. resistance Measure after leaving the sample at room temperature and DC resistance 1Ω max. humidity of 48±4h. (Rdc1, 2) Voltage processing: Capacitor shall be tested at a specified temperature under a specified voltage for 1h and the initial value shall be measured after setting the sample at room temperature for 48±4h. ∗ Capacitors shall be tested at 150+0, –10°C for 1 hour and the initial value shall be measured after setting the sample at room temperature and humidity for 48±4 hours. ;; ;;;; ; ;; Part A Exterior Capacitance tanδ Insulation resistance DCresistance (Rdc1, 2) • For more information about products with other capacitance or other data, please contact us. • All specifications are subject to change without notice. ;;;; ;; Part A No mechanical demages Variance from previous test: ±7.5% max. Specified initial value must be satisfied. Minimum insulation resistance: 500MΩ or 50MΩ•µF, whichever is smaller. 1Ω max.