NPN Darlington Transistor

BSP50 BSP50 NPN Darlington Transistor • This device is designed for applications requiring extremly high current gain at collector currents to 500mA. • Sourced from process 03. 2 1 4 3 SOT-223 1. Base 2. Collector 3. Emitter Absolute Maximum Ratings* Ta=25°C unless otherwise noted Symbol VCER VCBO VEBO IC TJ, TSTG Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous Operating and Storage Junction Temperature Range Value 45 60 5 800 - 55 ~ +150 Units V V V mA °C * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150°C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. www.DataSheet4U.com Electrical Characteristics Ta=25°C unless otherwise noted Symbol Off Characteristics V(BR)CBO V(BR)EBO ICES IEBO hFE VCE(sat) VBE(sat) Parameter Test Conditions IC = 100µA, IE = 0 IE = 10µA, IC = 0 VCE = 45V, VBE = 0 VEB = 4.0V, IC = 0 IC = 150mA, VCE = 10V IC = 500mA, VCE = 10V IC = 500mA, IB = 0.5mA IC = 500mA, IB = 0.5mA 1000 2000 1.3 1.9 V V Min. 60 5 50 50 Typ. Max. Units V V nA nA Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage On Characteristics Thermal Characteristics TA=25°C unless otherwise noted Symbol PD RθJA Parameter Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient Max. 1000 8.0 125 Units mW mW/°C °C/W ©2004 Fairchild Semiconductor Corporation Rev. A, May 2004 BSP50 Package Dimensions SOT-223 0.08MAX 3.00 ±0.10 MAX1.80 1.75 ±0.20 3.50 ±0.20 (0.60) 0.65 ±0.20 +0.04 0.06 –0.02 2.30 TYP (0.95) 4.60 ±0.25 0.70 ±0.10 (0.95) +0.10 0.25 –0.05 (0.60) 0°~ 10 ° 1.60 ±0.20 (0.46) (0.89) 6.50 ±0.20 Dimensions in Millimeters ©2004 Fairchild Semiconductor Corporation Rev. A, May 2004 7.00 ±0.30 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST ActiveArray™ FASTr™ Bottomless™ FPS™ CoolFET™ FRFET™ CROSSVOLT™ GlobalOptoisolator™ DOME™ GTO™ EcoSPARK™ HiSeC™ E2CMOS™ I2C™ EnSigna™ i-Lo™ FACT™ ImpliedDisconnect™ FACT Quiet Series™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC Across the board. Around the world.™ OPTOPLANAR™ PACMAN™ The Power Franchise POP™ Programmable Active Droop™ Power247™ PowerSaver™ PowerTrench QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ SILENT SWITCHER SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UltraFET VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I11