Single-ended capacitors

Aluminum electrolytic capacitors Single-ended capacitors Series/Type: www.DataSheet4U.com B43888 December 2006 Date: © EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Single-ended capacitors Very long useful life 105 °C B43888 Long-life grade capacitors Applications Professional electronic ballasts Power supplies Energy-saving lamps Features Compact dimensions High ripple current capability at high frequency Very long useful life (8000 to 10000 h / 105 °C) Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent Delivery mode Special terminal configurations and packing: Bulk Taped, Ammo pack Cut Kinked PAPR (protection against polarity reversal): crimped leads, J leads, bent leads Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details and ordering example. Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 24 B43888 Very long useful life 105 °C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan δ (20 °C, 120 Hz) Leakage current Ileak (20 °C, 5 min) Self-inductance ESL Useful life 105 °C, VR, IAC,R 105 °C, VR, IAC,R Requirements Diameter (mm) ESL (nH) ≤ 12.5 20 16 26 18 34 20 38 160 ... 450 V DC 1.1 VR 6.8 ... 100 µF ±20% M VR ≤ 350 V DC: tan δ = 0.20 VR ≥ 400 V DC: tan δ = 0.24 8000 h for d = 10 mm 10000 h for d ≥ 12.5 mm ∆C/C tan δ Ileak ≤ ±50% of initial value ≤ 3 times initial specified limit ≤ initial specified limit Voltage endurance test 105 °C, VR Post test requirements 8000 h for d = 10 mm 10000 h for d ≥ 12.5 mm ∆C/C ≤ ±25% of initial value tan δ ≤ 2 times initial specified limit Ileak ≤ initial specified limit To IEC 60068-2-6, test Fc: Displacement amplitude 0.75 mm, frequency range 10 ... 2000 Hz, acceleration max. 20 g, duration 3 × 2 h. Capacitor rigidly clamped by the aluminum case. To IEC 60068-1: VR ≤ 250 V: 40/105/56 ( 40 °C/+105 °C/56 days damp heat test) VR ≥ 350 V: 25/105/56 ( 25 °C/+105 °C/56 days damp heat test) IEC 60384-4 Vibration resistance test IEC climatic category Sectional specification Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 24 B43888 Very long useful life 105 °C Dimensional drawings With stand-off rubber seal Diameters (mm): 10, 12.5, 16, 18 With flat rubber seal Diameter (mm): 20 Dimensions and weights Dimensions (mm) d +0.5 10 10 12.5 12.5 16 16 16 18 18 20 Approx. weight g 1.9 2.6 3.6 4.5 5.5 7.5 7.8 8 11 10 l 16 + 1.0 20 + 2.0 20 + 2.0 25 + 2.0 20 + 2.0 25 + 2.0 31.5 + 2.0 20 + 2.0 31.5 + 2.0 20 + 2.0 a ±0.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 10.0 b 0.60 ± 0.05 0.60 ± 0.05 0.60 ± 0.05 0.60 ± 0.05 0.80 ± 0.05 0.80 ± 0.05 0.80 ± 0.05 0.80 ± 0.1 0.80 ± 0.1 1.0 ± 0.1 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 24 B43888 Very long useful life 105 °C Overview of available types VR (V DC) CR (µF) 6.8 10 22 33 47 68 100 10 10 10 × 16 × 20 × 20 10 10 × 16 × 20 10 × 20 12.5 × 20 12.5 × 20 12.5 × 25 16 × 20 16 20 16 20 × 25 × 20 × 31.5 × 20 10 10 × 16 × 20 10 10 × 16 × 20 10 16 18 16 18 × 20 × 25 × 20 × 31.5 × 31.5 12.5 × 20 160 200 250 350 400 450 Case dimensions d × l (mm) 12.5 × 25 16 16 20 18 × 20 × 31.5 × 20 × 31.5 12.5 × 25 16 16 20 18 × 25 × 31.5 × 20 × 31.5 12.5 × 20 12.5 × 20 12.5 × 25 16 × 20 16 20 × 25 × 20 12.5 × 20 12.5 × 25 16 × 20 16 20 × 25 × 20 Other voltage and capacitance ratings are available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 24 B43888 Very long useful life 105 °C Technical data and ordering codes CR 120 Hz 20 °C µF Case dimensions d×l mm ESRmax 120 Hz 25 °C Ω 1161 528 352 247 171 171 116 116 1161 528 352 247 171 171 116 116 1161 528 352 247 247 171 171 116 116 ESRmax 120 Hz 20 °C Ω 33.2 15.1 10.0 7.1 4.9 4.9 3.3 3.3 33.2 15.1 10.0 7.1 4.9 4.9 3.3 3.3 33.2 15.1 10.0 7.1 7.1 4.9 4.9 3.3 3.3 Zmax 100 kHz 20 °C Ω 4.00 1.50 1.55 1.05 0.81 0.75 0.68 0.45 4.00 1.50 1.40 1.05 0.81 0.75 0.68 0.50 3.50 2.30 2.30 1.70 1.10 0.78 0.45 0.63 0.45 IAC,R 100 kHz 105 °C mA 220 350 430 580 770 820 1080 1150 220 350 490 580 770 820 1080 1150 240 400 490 640 680 890 950 1180 1150 IAC,max Ordering code 100 kHz (composition see 85 °C beolow) mA 374 595 731 986 1309 1394 1836 1955 374 595 833 986 1309 1394 1836 1955 408 680 833 1088 1156 1513 1615 2006 1955 B43888A1106M*** B43888A1226M*** B43888A1336M*** B43888A1476M*** B43888A1686M*** B43888F1686M*** B43888A1107M*** B43888F1107M*** B43888A2106M*** B43888A2226M*** B43888A2336M*** B43888A2476M*** B43888A2686M*** B43888K2686M*** B43888A2107M*** B43888K2107M*** B43888F2106M*** B43888F2226M*** B43888F2336M*** B43888F2476M*** B43888P2476M*** B43888F2686M*** B43888P2686M*** B43888F2107M*** B43888P2107M*** VR = 160 V DC 10 10 × 16 22 10 × 20 33 10 × 20 47 12.5 × 20 68 12.5 × 25 68 16 × 20 100 16 × 25 100 20 × 20 VR = 200 V DC 10 10 × 16 22 10 × 20 33 12.5 × 20 47 12.5 × 20 68 12.5 × 25 68 16 × 20 100 16 × 25 100 20 × 20 VR = 250 V DC 10 10 × 20 22 12.5 × 20 33 12.5 × 20 47 12.5 × 25 47 16 × 20 68 16 × 25 68 20 × 20 100 16 × 31.5 100 20 × 20 Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ∅ ≥ 10 mm) 002 = for cut leads, bulk (for ∅ ≥ 10 mm) 003 = for crimped leads, blister (for ∅ ≥ 16 mm) 004 = for J leads, blister (from d × l = 10 × 16 mm to 18 × 31.5 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 10 × 16 mm to 12.5 × 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm) 012 = for bent 90° leads, blister (for ∅ 16 and 18 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 24 B43888 Very long useful life 105 °C Technical data and ordering codes CR 120 Hz 20 °C µF Case dimensions d×l mm ESRmax 120 Hz 25 °C Ω 1707 1161 528 352 247 247 171 2048 1393 633 422 296 296 205 2048 1393 633 633 422 296 ESRmax 120 Hz 20 °C Ω 48.8 33.2 15.1 10.0 7.1 7.1 4.9 58.5 39.8 18.1 12.1 8.5 8.5 5.9 58.5 39.8 18.1 18.1 12.1 8.5 Zmax 100 kHz 20 °C Ω 5.40 4.00 2.10 3.40 1.90 1.20 1.30 5.40 4.00 2.10 2.00 1.50 1.20 1.30 4.00 3.20 2.10 2.60 1.90 1.20 IAC,R 100 kHz 105 °C mA 180 240 440 570 810 790 1040 180 240 440 620 810 790 1040 200 270 510 500 680 870 IAC,max Ordering code 100 kHz (composition see 85 °C beolow) mA 306 408 748 969 1377 1343 1768 306 408 748 1054 1377 1343 1768 340 459 867 850 1156 1479 B43888A4685M*** B43888A4106M*** B43888A4226M*** B43888A4336M*** B43888A4476M*** B43888F4476M*** B43888A4686M*** B43888A9685M*** B43888A9106M*** B43888A9226M*** B43888A9336M*** B43888A9476M*** B43888F9476M*** B43888A9686M*** B43888A5685M*** B43888A5106M*** B43888A5226M*** B43888F5226M*** B43888A5336M*** B43888A5476M*** VR = 350 V DC 6.8 10 × 16 10 10 × 20 22 12.5 × 25 33 16 × 20 47 16 × 31.5 47 20 × 20 68 18 × 31.5 VR = 400 V DC 6.8 10 × 16 10 10 × 20 22 12.5 × 25 33 16 × 25 47 16 × 31.5 47 20 × 20 68 18 × 31.5 VR = 450 V DC 6.8 10 × 20 10 12.5 × 20 22 16 × 25 22 18 × 20 33 16 × 31.5 47 18 × 31.5 Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for ∅ ≥ 10 mm) 002 = for cut leads, bulk (for ∅ ≥ 10 mm) 003 = for crimped leads, blister (for ∅ ≥ 16 mm) 004 = for J leads, blister (from d × l = 10 × 16 mm to 18 × 31.5 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d × l = 10 × 16 mm to 12.5 × 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 18 × 31.5 mm) 012 = for bent 90° leads, blister (for ∅ 16 and 18 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 24 B43888 Very long useful life 105 °C Useful life depending on ambient temperature TA under ripple current operating conditions1) VR = 160 ... 450 V DC Frequency factor of permissible ripple current IAC versus frequency f 1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 24 B43888 Very long useful life 105 °C Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows: Lead spacing F = 2.5 mm (∅ d = 5 … 6.3 mm) Lead spacing F = 3.5 mm (∅ d = 8 mm) Lead spacing F = 5.0 mm (∅ d = 5 … 12.5 mm) Lead spacing F = 7.5 mm (∅ d = 16 ... 18 mm). Lead spacing 2.5 mm (∅ d = 5 ... 6.3 mm) Last 3 digits of ordering code: 007 Dimensions in mm ∅d 5 F H W W0 W1 W2 H0 P P0 P1 I1 t ∆h D0 2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0 6.3 Toler- +0.8 ±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2 ance 02 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 24 B43888 Very long useful life 105 °C Lead spacing 3.5 mm (∅ d = 8 mm) Last 3 digits of ordering code: 006 Dimensions in mm ∅d F 8 3.5 Toler- +0.8 ance 02 H 18.5 1.0 W 18.0 ±0.5 W0 12.5 min. W1 9.0 ±0.5 W2 1.5 P 12.7 P0 12.7 ±0.2 P1 4.6 ±0.5 I1 1.0 t 0.7 ∆h 1.0 D0 4.0 max. ±1.0 max. ±0.2 max. ±0.2 Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 24 B43888 Very long useful life 105 °C Lead spacing 5.0 mm (∅ d = 5 ... 8 mm) Last 3 di