(B43456 / B43458) Frequency converters

Capacitors with Screw Terminals Compact – 85 °C B43456, B43458 Long-life grade capacitors Applications I Frequency converters I Professional power supplies I Uninterruptible power supplies B43456 B43458 Features I Extremely compact, i. e. high CU product I High reliability and ripple current capability I All-welded construction ensures reliable KAL0567-B B43456 B43458 electrical contact I Version with optimized construction for base cooling (2-pad solution) available I Version with low-inductance design available Construction I Charge-discharge proof, polar I Aluminum case with insulating sleeve I Poles with screw terminal connections www.DataSheet4U.com I Mounting with ring clips, clamps or threaded stud I The bases of types with threaded stud and d ≤ 76,9 mm are not insulated, types with d = 91 mm have fully insulated bases 125 10/02 B43456 / B43458 Compact – 85 °C Specifications and characteristics in brief Rated voltage UR Surge voltage US Rated capacitance CR Capacitance tolerance Leakage current IL (5 min, 20 °C) Self-inductance ESL 350 … 450 VDC 1,10 · UR 1 000 … 18 000 µF ± 20 % M C R U R 0,7 I L ≤ 0,3 µA ⋅ æ ------- ⋅ -------ö + 4 µA è µF V ø Approx. 20 nH Capacitors with low inductance design: d ≥ 64,3 mm: approx. 13 nH Useful life 85 °C; UR; I~R 40 °C; UR; 1,5 · I~R > 12 000 h > 250 000 h Requirements: ∆C / C ESR IL ≤ ± 30 % of initial value ≤ 3 times initial specified limit ≤ initial specified limit Failure percentage: ≤ 1 % Failure rate: ≤ 40 fit (≤ 40 · 10 –9/h) (for definiton “fit”, refer to chapter “Quality”, page 62) Voltage endurance test 85 °C; UR 2 000 h Post test requirements: ∆C / C ESR IL ≤ ± 10 % of initial value ≤ 1,3 times initial specified limit ≤ initial specified limit Vibration resistance To IEC 60068-2-6, test Fc: displacement amplitude 0,75 mm, frequency range 10 to 55 Hz, acceleration max. 10 g, duration 3 × 2 h To IEC 60068-1: UR ≤ 400 VDC: 40/085/56 (– 40 °C/+ 85 °C/56 days damp heat test) UR = 450 VDC: 25/085/56 (– 25 °C/+ 85 °C/56 days damp heat test) Similar to CECC 30301-803, CECC 30301-807 IEC 60384-4 IEC climatic category Detail specifications Sectional specification Ripple current capability Due to the ripple current capability of the contact elements, the following current upper limits must not be exceeded: Capacitor diameter 51,6 mm 30 A 64,3 mm 40 A 76,9 mm 50 A 91,0 mm 70 A I~max 126 10/02 B43456 / B43458 Compact – 85 °C Dimensional drawings Type B43456 Ring clip/clamp mounting Type B43458 Threaded stud mounting M5: min. reach of screw = 8 mm M6: min. reach of screw = 12 mm*) *) 8 mm for low-inductance design Positive pole marking: + The base of types with threaded stud and d = 91 mm is fully insulated (the lengths l and l1 are increased by 0,5 mm in these cases). For types with threaded stud and d ≤ 76 mm the base is not insulated. Also refer to the notes on mounting given on page 168. Screw terminals with UNF threads are available upon request. Dimensions and weights Terminal M5 M5 M5 M6 M6 M6 M6 M6 Dimensions (mm) with insulating sleeve Approx. wt. (g) 220 280 440 540 840 1300 1200 1900 d I±1 I1 ± 1 87,2 112,2 112,2 111,5 149,0 226,5 149,8 226,3 I2 17 17 17 17 17 17 17 17 +0 –1 l3 7,0 +0,2/– 1 7,0 +0,2/– 1 7,0 +0,2/– 1 d1 d2 max d3 max a 13,5 13,5 13,5 17,7 17,7 17,7 17,7 17,7 + 0,2 – 0,4 51,6 +0/–0,8 80,7 51,6 +0/–0,8 105,7 64,3 +0/–0,8 105,7 76,9 +0/–0,7 105,7 76,9 +0/–0,7 143,2 76,9 +0/–0,7 220,7 91,0 +0/–2 91,0 +0/–2 144,5 221,0 M 12 8,2 M 12 8,2 M 12 8,2 22,2 22,2 28,5 31,7 31,7 31,7 31,7 31,7 6,4 +1,1/– 0,8 M 12 17,7 6,4 +1,1/– 0,8 M 12 17,7 6,4 +1,1/– 0,8 M 12 17,7 6,4 +1,1/– 0,8 M 12 17,7 6,4 +1,1/– 0,8 M 12 17,7 Dimensions are also valid for 2-pad solution and low-inductance design. Packing For ecological reasons the packing is pure cardboard. Capacitor diameter d 51,6 mm 64,3 mm Packing units (pieces) 22 15 Capacitor diameter d 76,9 mm 91,0 mm 127 10/02 Packing units (pieces) 12 8 B43456 / B43458 Compact – 85 °C Special designs I Low-inductance design I 2-pad solution Design for optimized connection of the capacitor to the heatsink when using base cooling. This version is available for capacitors without threaded stud and for diameters ≥ 64,3 mm (cf. I~R(B) in table “Technical data and ordering codes” and useful life graphs). Thermopad thickness 0,5 mm 0,2 mm Heatsink KAL0823-3-E Ordering codes: Design Low inductance (13 nH) 2-pad solution Identification in 3rd block of ordering code M003 M006 Remark For capacitors with diameter d ≥ 64,3 mm For capacitors with diameter d ≥ 64,3 mm and without threaded stud Accessories The following items are included in the delivery package, but are not fastened to the capacitors: Thread For terminals M5 M6 For mounting M 12 Toothed washers A 5,1 DIN 6797 A 6,4 DIN 6797 Screws/Nuts Cylinder-head screw M 5 × 8 DIN 84-4.8 Cylinder-head screw M 6 × 12 DIN 85-4.8 Maximum torque 2 10 Nm Nm 2,5 Nm J 12,5 DIN 6797 Hex nut BM 12 DIN 439 The following must be ordered separately: Ring clips Clamps for capacitors with d ≥ 64,3 mm Insulating parts 128 10/02 B 44 030 (cf. page 169) B 44 030 (cf. page 173) B 44 020 (cf. page 166) B43456 / B43458 Compact – 85 °C Overview of available types UR (VDC) CR (µF) 1 000 1 500 2 200 3 300 3 900 4 700 5 600 6 800 8 200 10 000 12 000 15 000 18 000 350 Case dimensions d × l (mm) 400 51,6 × 80,7 450 51,6 × 80,7 51,6 × 105,7 64,3 × 105,7 76,9 × 105,7 51,6 × 80,7 51,6 × 105,7 64,3 × 105,7 51,6 × 80,7 51,6 × 105,7 64,3 × 105,7 76,9 × 105,7 76,9 × 105,7 76,9 × 143,2 76,9 × 143,2 91,0 × 144,5 91,0 × 144,5 76,9 × 220,7 91,0 × 221,0 76,9 × 220,7 91,0 × 221,0 76,9 × 143,2 91,0 × 144,5 76,9 × 220,7 91,0 × 221,0 The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. 129 10/02 B43456 / B43458 Compact – 85 °C Technical data and ordering codes UR CR 100 Hz 20 °C VDC µF 350 Case dimensions d×l mm ESRmax 100 Hz 20 °C mΩ Zmax 10 kHz 20 °C mΩ 93 63 38 28 20 14 11 9 133 93 63 44 32 24 16 14 11 190 130 85 57 35 31 26 18 I~max 100 Hz 40 °C A 16 21 32 43 50 70 50 70 13 17 22 30 40 50 70 50 70 13 18 24 32 49 57 50 70 I~R 100 Hz 85 °C A 5,7 7,6 12 15 20 28 34 38 4,6 6,0 8,0 11 14 19 25 31 35 4,8 6,5 8,4 12 17 20 24 32 I~R(B) Ordering code1) 100 Hz 85 °C A 11 14 21 30 36 52 50 58 8,2 13 15 20 29 33 48 46 54 9,6 12 15 23 31 37 36 51 B4345*A4158M000 B4345*A4228M000 B4345*A4398M000 2) B4345*A4568M000 2) B4345*A4828M000 2) B4345*A4129M000 2) B4345*A4159M000 2) B4345*A4189M000 2) B4345*A9108M000 B4345*A9158M000 B4345*A9228M000 B4345*A9338M000 2) B4345*A9478M000 2) B4345*A9688M000 2) B4345*A9109M000 2) B4345*A9129M000 2) B4345*A9159M000 2) B4345*A5108M000 B4345*A5158M000 B4345*A5228M000 2) B4345*A5338M000 2) B4345*A5568M000 2) B4345*A5688M000 2) B4345*A5828M000 2) B4345*A5129M000 2) 1 500 51,6 × 80,7 110 2 200 51,6 × 105,7 73 3 900 64,3 × 105,7 5 600 76,9 × 105,7 8 200 76,9 × 143,2 12 000 91,0 × 144,5 15 000 76,9 × 220,7 18 000 91,0 × 221,0 41 29 20 14 11 9 400 1 000 51,6 × 80,7 160 1 500 51,6 × 80,7 110 2 200 51,6 × 105,7 3 300 64,3 × 105,7 4 700 76,9 × 105,7 6 800 76,9 × 143,2 10 000 91,0 × 144,5 12 000 76,9 × 220,7 15 000 91,0 × 221,0 73 49 34 24 16 14 11 450 1 000 51,6 × 80,7 220 1 500 51,6 × 105,7 150 2 200 64,3 × 105,7 100 3 300 76,9 × 105,7 5 600 76,9 × 143,2 6 800 91,0 × 144,5 8 200 76,9 × 220,7 12 000 91,0 × 221,0 65 38 32 26 18 Preferred types 1) * “6” = for capacitors with ring clip/clamp mounting “8” = for capacitors with threaded stud 2) For 2-pad solution (types withoud threaded stud) and for low-inductance design, see page 128. 130 10/02 B43456 / B43458 Compact – 85 °C Useful life depending on ambient temperature TA (for natural cooling) and versus temperature of case base TB (for base cooling) under ripple current operating conditions1) 3,0 KAL0528-Q Ι~ ; Ι~ Ι ~ R Ι ~ R (B) 2,0 1,5 1,0 B43456/458 250 000 h 150 000 h 100 000 h 50 000 h 25 000 h 0,5 0 40 12 000 h 50 60 70 80 90 ˚C 100 TA ; T B Frequency factor of permissible ripple current I~ versus frequency f 1,5 B43456/458 Ι ~f Ι ~100 Hz 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 1 10 5 10 2 5 10 3 Hz 10 4 f KAL0332-6 1) The ripple current refers to I~R for natural cooling or to I~R(B) for base cooling, respectively. Refer to page 40 for an explanation on how to interpret the useful life graphs. 131 10/02 B43456 / B43458 Compact – 85 °C Frequency characteristics of ESR Typical behavior 1,5 B43456/458 ESR f ESR 100 Hz 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 0,5 1 10 5 10 2 5 10 3 KAL0336-4 Hz 10 4 f Impedance Z versus frequency f Typical behavior at 20 °C 10 1 KAL0497-R Ω Z 10 0 4 10 _1 B43456/458 3900 µF/350 V 15000 µF/350 V 6000 µF/450 V 4 10 _2 4 10 _3 10 1 10 2 10 3 10 4 10 5 Hz 10 6 f 132 10/02 Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND ++49 89 636 09, FAX (0 89) 636-2 26 89 (  EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EP