|
Part Number |
AZ943 |
|
Manufacturer |
Zettler |
|
Semiconductor DataSheet |
|
DataSheet View |
|
AZ943
15 AMP MINIATURE PC BOARD RELAY
FEATURES • • • • • High performance Low seated height Flux tight and sealed versions available UL, CUR file E43203 Class B insulation (130°C) standard
CONTACTS
Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Form A and C Max. switched power: 210 W or 2770 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time 1 x 106 1 x 105 at rated load 10 ms max. 5 ms max. (with no coil suppression) 1500 Vrms contact to coil 1000 Vrms across contacts 100 megohms min. at 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C(-40°F) to 95°C(203°F) -40°C(-40°F) to 130°C(266°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 10 g
UL/CUR Ratings
Release Time 1 Form A www.DataSheet4U.com 15 A at 125 VAC, general use Dielectric Strength 10A at 277 VAC, general use, 100,000 cycles (at sea level for 1 min.) TV - 5 120 VAC 1 Form C 10 A at 277 VAC, general use, 100,000 cycles Insulation Resistance Dropout Ambient Temperature Operating Storage
Material Resistance
AgSnO2 < 100 milliohms initally (24 V, 1 A method)
COIL
Power At Pickup Voltage Max Continuous Dissipation Temperature Rise
(at nominal coil voltage)
Vibration Shock 203 mW 1.0 W at 20°C (68°F) 27°C (49°F) Max. 130°C (266°F) Max. Solvent Temp. Max. Immersion Time Weight Enclosure Terminals Max. Solder Temp. Max. Solder Time
Temperature
NOTES
1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice.
ZETTLER
electronics
2000-01-21
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
AZ943
RELAY ORDERING DATA
STANDARD RELAYS COIL SPECIFICATIONS
Nominal Coil VDC 5 6 9 12 18 24 48 Max. Continuous VDC 8.3 10.0 15.0 20.0 30.0 40.0 67.0 Coil Resistance ±10% 70 100 225 400 900 1,600 6,200 Must Operate VDC 3.8 4.5 6.8 9.0 13.5 18.0 36.0
ORDER NUMBER
Unsealed AZ943–1CH–5D AZ943–1CH–6D AZ943–1CH–9D AZ943–1CH–12D AZ943-1CH-18D AZ943–1CH–24D AZ943–1CH–48D Sealed AZ943–1CH–5DE AZ943–1CH–6DE AZ943–1CH–9DE AZ943–1CH–12DE AZ943-1CH-18DE AZ943–1CH–24DE AZ943–1CH–48DE
Substitute “1AH” in place of “1CH” to indicate 1 Form A contact.
MECHANICAL DATA
Outline Dimensions
.748 [19.0] .600 [15.3]
PC Board Layout
5xø.051 [ø1.3] .134 [3.4] .059 [1.49] .236 [6.0]
.618 [15.7]
.472 [12.0] .185 [4.7] .017 [0.43] .480 [12.2]
.559 [14.2]
VIEWED TOWARD TERMINALS
.014 [0.36] 4x.016 [0.4]
Wiring Diagram
.039 [1.0]
4x.032 [0.8]
FORM "A"
FORM "C"
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER
electronics
2000-01-21
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
|