AZ723
MINIATURE POWER RELAY
FEATURES • • • • • • • • AC coils Dielectric strength 5000 Vrms Low cost Flux tight package 5 Amp switching - double pole contacts Isolation spacing greater than 8mm Molded materials: all 94V-0 UL and Canadian file E43203
CONTACTS
Arrangement Ratings DPST (2 Form A) DPDT (2 Form C) Resistive load: Max. switched power: 150 W, 1250 VA Max. switched current: 5 A Max. switched voltage: 150 VDC/400 VAC Inductive load: (cosØ =0.4) Max. switched power: 90W or 500VA Max. Switched current: 5A Max. switched voltage: 125VDC or 400 VAC
Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at rated load 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression)
Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 3000 Vrms between contact sets 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration 1000 megohms min. at 20°C, 500 VDC 50% RH Greater than 30% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) 0.062" DA at 10–55 Hz 10 g PC (94V-0) Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 17 grams
Rated Load UL, CUR
5 A 250 VAC, resistive 5 A 30VDC resistive 1/ HP 240 VAC 3 5 VDC, .01A Silver alloy 30 milliohms initially (6V, 1A method)
Min. Load Material Resistance
Shock
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 576 mW 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient 36°C (97°F) at nominal coil voltage Max. 105°C (221°F)
Enclosure Terminals Max. Solder Temp. Max. Solder Time Weight
NOTES
1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice.
ZETTLER
electronics
1998-10-28
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
AZ723
RELAY ORDERING DATA
COIL SPECIFICATIONS - AC Coil
Nominal Coil VAC 6 12 24 50 110 220 230 Must Operate VAC 4.8 9.6 19.2 40.0 88.0 176.0 184.0 Max. Continuous VAC 7.8 15.6 31.2 65.0 143.0 286.0 299.0 Nominal Current mA ±10% 150.0 75.0 37.5 18.0 10.6 5.3 3.6 Coil Resistance ±10% 16 65 260 1130 4600 20200 24900
ORDER NUMBER
Form A (DPST) AZ723-2A-6A AZ723-2A-12A AZ723-2A-24A AZ723-2A-50A AZ723-2A-110A AZ723-2A-220A AZ723-2A-230A Form C (DPDT) AZ723-2C-6A AZ723-2C-12A AZ723-2C-24A AZ723-2C-50A AZ723-2C-110A AZ723-2C-220A AZ723-2C-230A
MECHANICAL DATA
.023 (0.58) x .023 (0.58) 0.016 (0.4) x 0.040 (1.015)
.035 Dia. (0.9) 2 places
(4 places Form A (6 places Form C)
Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010"
ZETTLER
electronics
1998-10-28
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
