AZ2280
30 AMP MINIATURE POWER RELAY
FEATURES • • • • • Quick-connect leads for contacts and coil 1 Form A, B and C contacts available AC and DC coils available Available with epoxy seal UL and Canadian file E44211 GENERAL DATA CONTACTS
Arrangement Ratings SPST (1 Form A, or B) SPDT (1 Form C) Resistive load: Max. switched power: 900 W or 7200 VA Max. switched current:30 A (Form A N.O.) 15 A (Form B N.O.) 20 A (Form C N.O.) 15 A (Form C N.O. Max. switched voltage: 277 VAC, 30 VDC UL, CUR 30/15 A @ 240 VAC, gen use (NO/NC, Form A or B) 20/10 A @ 240 VAC, gen use (NO/NC, Form C) 20/10 A @ 28 VDC, res (NO/NC, Form A or B) 1.0/.25 Hp @ 120 VAC, (NO/NC, Form A or B) 2.0/.50 Hp @ 240 VAC, (NO/NC, Form A, B or C) 5/3 A @ 240 VAC, tungsten (NO/NC, Form A, B or C) 6/3 A @ 277 VAC, gen use (NO/NC, Form A, B or C) 6/3 A @ 277 VAC, ballast (NO/NC, Form A, B or C) 5 VDC, 0.1 A Silver alloy < 50 milliohms initially (24 V, 1 A voltage drop method) Life Expectancy Mechanical Electrical Operate Time Release Time Minimum operations 1 x 107 1 x 105 at rated load 15 ms at nominal coil voltage 10 ms at nominal coil voltage (with no coil suppression)
Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 2500 Vrms contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. 1000 megohms min. at 500 VDC, 20°C 50% RH DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage At nominal coil voltage -55°C (-67°F) to 85°C (185°F) -55°C (-67°F) to 105°C (221°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, Quick Connects 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 36 grams
Minimum Load Material Resistance
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature DC: 500 mW AC: 1.4 VA DC: 1.7 W at 20°C (68°F) AC: 2.7 VA at 20°C (68°F) 38°C (68°F) Max. 105°C (221°F)
Max. Immersion Time Weight
NOTES
1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice.
ZETTLER
electronics
1999-03-11
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
AZ2280
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
Nominal Coil VDC 5 6 9 12 15 18 24 48 Nominal Coil VAC 12 24 120 208 240 277 Must Operate VDC 3.75 4.50 6.75 9.00 11.25 13.5 18.00 36.00 Must Operate VAC 10.2 20.4 102.0 176.8 204.0 235.4 Max. Continuous VDC 6.4 7.8 12.2 15.4 19.8 24.1 32.0 62.6 Max. Continuous VAC 13.8 27.6 138.0 276.0 276.0 318.5 Nominal Current mA ± 10% 185 150 93 77 59 47 36 19 Nominal Coil Power VA 2.0 2.0 2.0 1.5 2.0 2.0 Coil Resistance ± 10% 27 40 97 155 256 380 660 2560 Coil Resistance ± 10% 25 100 2,500 11,000 11,000 14650
ORDER NUMBER*
AZ2280–1A–5D AZ2280–1A–6D AZ2280–1A–9D AZ2280–1A–12D AZ2280–1A–15D AZ2280–1A–18D AZ2280–1A–24D AZ2280–1A–48D
COIL SPECIFICATIONS – AC Coil ORDER NUMBER*
AZ2280–1A–12A AZ2280–1A–24A AZ2280–1A–120A AZ2280–1A–208A AZ2280–1A–240A AZ2280-1A-277A
*Add suffix “E” for epoxy sealed version. Substitute “1B” or “1C” for 1 form B or 1 form C.
MECHANICAL DATA
1.08 (27.5) 1.09 (27.8)
0.25 x 0.032 ±0.003 3 places
1.98 1.71 (50.2) (43.5)
1.27 (32.4)
0.187 x 0.02* ±0.003 2 places 0.14 (3.5)
* "K" = 0.110 x .02
WIRING DIAGRAM (Top View)
Form A
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
Form B
Form C
ZETTLER
electronics
1999-03-11
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
