Dual Enhancement Mode MOSFET

www.DataSheet4U.com APM4538K Dual Enhancement Mode MOSFET (N-and P-Channel) Features • N-Channel 36V/5A, RDS(ON) =50mΩ(typ.) @ VGS = 10V RDS(ON) =60mΩ(typ.) @ VGS = 4.5V Pin Description D1 D1 D2 D2 • P-Channel -36V/-4A, RDS(ON) =60mΩ(typ.) @ VGS =-10V RDS(ON) =80mΩ(typ.) @ VGS =-4.5V S1 G1 S2 G2 Top View of SOP − 8 (8) D1 (7) D1 (3) S2 • • • Super High Dense Cell Design Reliable and Rugged Lead Free Available (RoHS Compliant) (2) G1 (4) G2 Applications • Power Management in Notebook Computer, Portable Equipment and Battery Powered Systems S1 (1) D2 (5) D2 (6) N-Channel MOSFET P-Channel MOSFET Ordering and Marking Information APM4538 Lead Free Code Handling Code Tem p. Range Package Code Package Code K : SOP-8 Operating Junction Tem p. Range C : -55 to 150°C Handling Code TU : Tube TR : Tape & Reel Lead Free Code L : Lead Free Device Blank : Original Device XXXXX - Date Code APM4538 K : APM4538 XXXXX Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte in plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 1 www.anpec.com.tw www.DataSheet4U.com APM4538K Absolute Maximum Ratings Symbol VDSS VGSS ID* IDM* IS* TJ TSTG PD* RθJA* Note: *Surface Mounted on 1in pad area, t ≤ 10sec. 2 (TA = 25°C unless otherwise noted) Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Pulsed Drain Current Diode Continuous Forward Current Maximum Junction Temperature Storage Temperature Range Power Dissipation TA=25°C TA=100°C VGS=±10V N Channel 36 ±16 5 20 1.7 P Channel -36 ±16 -4 -16 -1.7 Unit V A A °C W °C/W 150 -55 to 150 2 0.8 62.5 Thermal Resistance-Junction to Ambient Electrical Characteristics Symbol Parameter (TA = 25°C unless otherwise noted) APM4538K Min. Typ. Max. Test Condition Unit Static Characteristics BVDSS Drain-Source Breakdown Voltage VGS=0V, IDS=250µA VGS=0V, IDS=-250µA VDS=30V, VGS=0V IDSS Zero Gate Voltage Drain Current TJ=85°C VDS=-30V, VGS=0V TJ=85°C VGS(th) Gate Threshold Voltage IGSS Gate Leakage Current VDS=VGS, IDS=250µA VDS=VGS, IDS=-250µA VGS=±16V, VDS=0V VGS=10V, IDS=5A RDS(ON) a N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch 36 -36 1 30 -1 -30 0.7 -1 1.1 -1.5 1.5 -2 ±100 ±100 50 60 60 80 65 80 80 100 V µA V nA Drain-Source On-State Resistance VGS=-10V, IDS=-4A VGS=4.5V, IDS=4A VGS=-4.5V, IDS=-3A mΩ Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 2 www.anpec.com.tw www.DataSheet4U.com APM4538K Electrical Characteristics (Cont.) Symbol Parameter (TA = 25°C unless otherwise noted) Test Condition APM4538K Min. Typ. Max. Unit Diode Characteristics VSD a Diode Forward Voltage b ISD=1.7A, VGS=0V ISD=-1.7A, VGS=0V N-Ch P-Ch 0.8 -0.8 1.3 -1.3 V Dynamic Characteristics RG Ciss Coss Crss td(ON) Tr td(OFF) Tf Gate Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Turn-on Rise Time Turn-off Delay Time Turn-off Fall Time b VGS=0V,VDS=0V,F=1MHz N-Channel VGS=0V, VDS=25V, Frequency=1.0MHz P-Channel VGS=0V, VDS=-25V, N-Channel VDD=15V, RL=15Ω, IDS=1A, VGEN=10V, RG=6Ω P-Channel VDD=-15V, RL=15Ω, IDS=-1A, VGEN=-10V, RG=6Ω N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch 2.8 11 450 770 65 120 25 80 10 10 8 15 20 25 5 15 15 20 20 30 28 50 15 30 Ω pF ns Gate Charge Characteristics Qg Qgs Qgd Notes: Total Gate Charge Gate-Source Charge Gate-Drain Charge N-Channel VDS=15V, VGS=10V, IDS=5A P-Channel VDS=-15V, VGS=-10V, IDS=-4A N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch 15 26 4.5 5.1 2.1 3.3 21 35 nC a : Pulse test ; pulse width≤300µs, duty cycle≤2%. b : Guaranteed by design, not subject to production testing. Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 3 www.anpec.com.tw www.DataSheet4U.com APM4538K Typical Characteristics N-Channel Power Dissipation 2.5 6 Drain Current 2.0 5 ID - Drain Current (A) Ptot - Power (W) 4 1.5 3 1.0 2 0.5 o 1 TA=25 C 0 20 40 60 80 100 120 140 160 TA=25 C,VG=10V 0 20 40 60 80 100 120 140 160 o 0.0 0 Tj - Junction Temperature (°C) Tj - Junction Temperature (°C) Safe Operation Area Normalized Transient Thermal Resistance 60 2 1 Thermal Transient Impedance Duty = 0.5 0.2 ID - Drain Current (A) 10 it n) L im 300µs 1ms 10ms 100ms 1s Rd s( o 0.1 0.1 0.05 0.02 0.01 1 0.01 Single Pulse 2 0.1 DC TA=25 C 0.01 0.01 0.1 o 1 10 100 1E-3 1E-4 Mounted on 1in pad o RθJA : 62.5 C/W 1E-3 0.01 0.1 1 10 30 VDS - Drain - Source Voltage (V) Square Wave Pulse Duration (sec) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 4 www.anpec.com.tw www.DataSheet4U.com APM4538K Typical Characteristics (Cont.) N-Channel Output Characteristics 20 18 16 VGS= 4, 5, 6, 7, 8, 9, 10V 80 75 Drain-Source On Resistance RDS(ON) - On - Resistance (mΩ) 70 65 60 55 50 45 40 35 VGS=10V VGS=4.5V ID - Drain Current (A) 14 12 10 8 6 4 2 2V 0 0 2 4 6 8 10 3V 30 0 4 8 12 16 20 VDS - Drain-Source Voltage (V) ID - Drain Current (A) Transfer Characteristics 20 18 16 1.6 Gate Threshold Voltage IDS=250µΑ Normalized Threshold Voltage 1.4 1.2 1.0 0.8 0.6 0.4 0.2 -50 -25 ID - Drain Current (A) 14 12 10 8 6 4 2 0 0 1 2 3 4 5 Tj=25 C o Tj=125 C o Tj=-55 C o 0 25 50 75 100 125 150 VGS - Gate - Source Voltage (V) Tj - Junction Temperature (°C) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 5 www.anpec.com.tw www.DataSheet4U.com APM4538K Typical Characteristics (Cont.) N-Channel Drain-Source On Resistance 2.0 VGS = 10V 1.8 IDS = 5A 10 20 Source-Drain Diode Forward Normalized On Resistance 1.6 IS - Source Current (A) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 -50 -25 RON@Tj=25 C: 50mΩ 0 25 50 75 100 125 150 o Tj=150 C o o Tj=25 C 1 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Tj - Junction Temperature (°C) VSD - Source - Drain Voltage (V) Capacitance 700 Frequency=1MHz 9 600 10 VDS=15V IDS=5A Gate Charge VGS - Gate - source Voltage (V) 30 8 7 6 5 4 3 2 1 0 0 3 6 9 12 15 C - Capacitance (pF) 500 400 300 200 100 Crss 0 0 5 10 Ciss Coss 15 20 25 VDS - Drain - Source Voltage (V) QG - Gate Charge (nC) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 6 www.anpec.com.tw www.DataSheet4U.com APM4538K Typical Characteristics (Cont.) P-Channel Power Dissipation 2.5 5 Drain Current 2.0 4 1.5 -ID - Drain Current (A) o Ptot - Power (W) 3 1.0 2 0.5 1 o 0.0 TA=25 C 0 20 40 60 80 100 120 140 160 0 TA=25 C,VG=-10V 0 20 40 60 80 100 120 140 160 Tj - Junction Temperature (°C) Tj - Junction Temperature (°C) Safe Operation Area Normalized Transient Thermal Resistance 50 2 1 Thermal Transient Impedance 10 Duty = 0.5 0.2 -ID - Drain Current (A) im it on )L 1ms Rd 0.1 0.1 0.05 0.02 0.01 s( 1 10ms 100ms 1s 0.1 DC 0.01 Single Pulse 2 0.01 TA=25 C o 0.1 1 10 100 1E-3 1E-4 Mounted on 1in pad o RθJA : 62.5 C/W 1E-3 0.01 0.1 1 10 30 -VDS - Drain - Source Voltage (V) Square Wave Pulse Duration (sec) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 7 www.anpec.com.tw www.DataSheet4U.com APM4538K Typical Characteristics (Cont.) P-Channel Output Characteristics 16 14 12 VGS= -4,-5,-6,-7,-8,-9,-10V 120 110 Drain-Source On Resistance RDS(ON) - On - Resistance (mΩ) 100 90 80 70 60 50 40 30 VGS= -10V VGS= -4.5V -ID - Drain Current (A) 10 8 -3V 6 4 -2V 2 0 0 1 2 3 4 5 6 7 8 20 0 2 4 6 8 10 12 14 16 -VDS - Drain - Source Voltage (V) -ID - Drain Current (A) Transfer Characteristics 16 14 12 1.6 Gate Threshold Voltage IDS= -250µΑ 1.4 Normalized Threshold Voltage -ID - Drain Current (A) 1.2 1.0 0.8 0.6 0.4 0.2 -50 -25 10 8 6 4 2 0 Tj=25 C o Tj=125 C o Tj=-55 C o 0 1 2 3 4 5 0 25 50 75 100 125 150 -VGS - Gate - Source Voltage (V) Tj - Junction Temperature (°C) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 8 www.anpec.com.tw www.DataSheet4U.com APM4538K Typical Characteristics (Cont.) P-Channel Drain-Source On Resistance 1.8 VGS = -10V 1.6 IDS = -4A 10 Tj=150 C o Source-Drain Diode Forward 20 Normalized On Resistance 1.2 1.0 0.8 0.6 0.4 -50 -25 RON@Tj=25 C: 60mΩ 0 25 50 75 100 125 150 o -IS - Source Current (A) 1.4 1 Tj=25 C o 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Tj - Junction Temperature (°C) -VSD - Source - Drain Voltage (V) Capacitance 1200 Frequency=1MHz 10 VDS= -15V IDS= -4A 8 Gate Charge 800 Ciss -VGS - Gate - source Voltage (V) 1000 C - Capacitance (pF) 6 600 4 400 200 Crss 0 2 Coss 0 0 5 10 15 20 25 30 0 5 10 15 20 25 30 -VDS - Drain - Source Voltage (V) QG - Gate Charge (nC) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 9 www.anpec.com.tw www.DataSheet4U.com APM4538K Packaging Information SOP-8 pin ( Reference JEDEC Registration MS-012) E H e1 D e2 A1 A 1 L 0.004max. Dim A A1 D E H L e1 e2 φ1 Mi ll im et er s Min. 1. 35 0. 10 4. 80 3. 80 5. 80 0. 40 0. 33 1. 27B S C 8° Max . 1. 75 0. 25 5. 00 4. 00 6. 20 1. 27 0. 51 Min. 0. 053 0. 004 0. 189 0. 150 0. 228 0. 016 0. 013 0.015X45 Inche s Max . 0. 069 0. 010 0. 197 0. 157 0. 244 0. 050 0. 020 0. 50B S C 8° Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 10 www.anpec.com.tw www.DataSheet4U.com APM4538K Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category