SOT-23 SURFACE MOUNT LED LAMPS

www.DataSheet4U.com SOT-23 SURFACE MOUNT LED LAMPS AM23SRD-F AM23SRC-F SUPER BRIGHT RED SUPER BRIGHT RED Features !SOT-23 !LOW Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. PACKAGE SURFACE MOUNT LED LAMP. POWER CONSUMPTION. LIFE - SOLID STATE RELIABILITY. !LONG !PACKAGE: 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0445 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/27/2001 DRAWN: M.F.CAI PAGE: 1 OF4 Selection Guide Par t No . Dic e L en s Ty p e Iv (mc d ) @ 20 mA Mi n . AM23SRD-F SUPER BRIGHT RED(InGaAlP) AM23SRC-F WATER CLEAR 40 70 140° RED DIFFUSED 40 Ty p . 70 Viewin g An g le 2θ1/2 140° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C ° +Sy mb o l λpeak λD ∆λ1/2 C Par amet er Peak Wavelength Dev ic e Super Bright Red Ty p . 660 Max . Un it s nm Tes t Co n d it io n s IF=20mA Dominate Wavelength Super Bright Red 640 nm IF=20mA Spectral Line Halfwidth Super Bright Red 20 nm IF=20mA Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF IR Forward Voltage Reverse Current Super Bright Red Super Bright Red 1.85 2.5 10 V uA IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C ° Par amet er Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Su p er B r ig h t Yello w 100 30 155 5 -40°C To +85°C -40°C To +85°C Un it s mW mA mA V SPEC NO: CDA0445 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/27/2001 DRAWN: M.F.CAI PAGE: 2 OF4 Super Bright Red AM23SRD-F,AM23SRC-F SPEC NO: CDA0445 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/27/2001 DRAWN: M.F.CAI PAGE: 3 OF4 AM23SRx-F SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0445 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: OCT/27/2001 DRAWN: M.F.CAI PAGE: 4 OF4