|
Part Number |
ADL65075TA2 |
|
Manufacturer |
Laser Components |
|
Semiconductor DataSheet |
|
DataSheet View |
|
www.DataSheet4U.com
ADL-65075TA2
2006/10/16
l l
ver 3.0
APC Laser Diode TM
APC Laser Diode
Perfect Solution For Auto Power Controlled Laser Diode
By converting the external APC circuit board into an ASIC, we package the APC circuit into a traditional TO-can together with the laser chip. From now on, single package APC function included laser diode is realized. Powered with Arima’s proprietary APC Laser Diode TM technology, ADL-65075TA2 is your perfect solution for the stable light power output, compact size, high brightness laser light source. Features: 1. 5.6mm package and 650nm 7mW 70℃ operation 2. Low operation current 3. Saving space and cost of laser module 4. Voltage driven LD, easy to use Applications: 1. General purpose red laser light source 2. Laser pointer 3. Industrial laser markers / measuring instruments
TM
APC circuit
ADL-65075TA2
Wavelength
Electrical-Optical Characteristics @Tc=25oC:
Symbol Min. Typ. Max Unit Condition
Item
λ
645
655
660
nm
Po=7mW
Operation current
Iop
-
27
35
mA
Po=7mW Vcc=3V
Variable resistor
VR
1
3.5
8
K
Parallel divergence angle
θ//
6
9
12
Deg
Perpendicular divergence angle
θ⊥
25
30
32
Deg
Parallel FFP deviation angle
Δθ//
-3.0
0
+3.0
Deg
Po=7mW
Perpendicular FFP deviation angle
Δθ⊥
-3.0
0
+3.0
Deg
Emission point accuracy
ΔxΔyΔz
-80
0
+80
um
-
Power-Temp stability (25~70 oC)
ΔPoT
-20
-10
0
%
Po=7mW,Vcc=3.0V
Po=7mW,Temp=25oC
Power-Vcc stability (6.0~3.5V)
ΔPoV
-15
-10
0
%
Power-Vcc stability (3.0~2.5V)
ΔPoV
-15
-10
0
%
Po=7mW,Temp=25oC
Maximum Ratings: Item
Symbol
Rating
Unit
Power supply voltage
Vcc
2.5-6.0*
V
Laser optical output power
Po
10
mW
o
Operation temperature
Topr
-10 ~ +70
C
Storage temperature
Tstg
-40 ~ +85
o
C
* Effective heat sink is recommended on 6V case due to extra heat.
1
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com USA: LASER COMPONENTS IG, Inc., Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: OPTOPHOTONICS sa, Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@optophotonics.fr
www.DataSheet4U.com
APC Laser Diode TM
ADL-65075TA2
2006/10/16 ver 3.0
Block Diagram:
Vcc
1.
Traditional LD needs to connect an external APC circuit
T ra d itio n a l L D
1
2
board for the constant power operation.
The VR (variable
LD
21
resistor) is used to adjust the laser output to a desired target power. 2. ADL-65075TA2 consists an APC IC inside the TO-5.6mm package, and leaves the VR outside for adjusting the optical output power.
PD
APC c ircu it
3 VR
A connection
Built-in APC LD
1 Vcc
3.
Oscillation Damper is recommended for stabilizing the optical output power.
LD
APC circuit
PD
C1
Oscillation Damper 2
3
C2
Outline Dimension & Pin Assignment:
1. 2. 3. Vcc GND VR
VR
Laser Safety Precautions
1.
To protect laser from overdriving condition, setting VR to maximum value before you turn on Vcc can minimized the laser output power.
2.
Do not operate the device above the maximum rating condition, even momentarily. It may cause unexpected permanent damage to the device.
3.
Semiconductor laser device is very sensitive to electrostatic discharge.
High voltage spike current may change the Therefore, proper measures for
characteristics of the device, or malfunction at any time during its service period. preventing electrostatic discharge are strongly recommended.
4.
To obtain a stable characteristic and good reliability, the effective heat sink is necessary. So it is recommended that always apply proper heat sink before the device is operating.-
5.
Do not look into the laser beam directly by bare eyes. The laser beam may cause severe damage to human eyes.
2
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com USA: LASER COMPONENTS IG, Inc., Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: OPTOPHOTONICS sa, Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@optophotonics.fr
w
w
w
.
D
a
t
a
S
h
e
e
t
4
U
.
c
o
m
APC Laser Diode TM
ADL-65075TA2
2006/10/16 ver 3.0
8
45
7
40
Power(mW)
Iop(mA)
6
35
5
30
4 20 30 40 50 60
o
25
70 80
20
30
40
50
60
o
70
80
Temperature( C)
Temperature( C)
www.lasercomponents.com
3
Issue: 02/07 / V2 / HW / divers-vis/ari/apcld/ adl-65075ta2.pdf
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com USA: LASER COMPONENTS IG, Inc., Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk France: OPTOPHOTONICS sa, Phone: +33 1 3959 5225, Fax: +33 1 3959 5350, info@optophotonics.fr
|