SURFACE MOUNT LED LAMP

3.0x2.0mm SURFACE MOUNT LED LAMP AA3020CGCK GREEN Features z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM z SUITABLE FOR COMPACT OPTOELECTRONIC z LOW POWER CONSUMPTION. z PACKAGE : 2000PCS / REEL. z RoHS COMPLIANT. Description The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. SPACE REQUIRED. APPLICATIONS. Package Dimensions www.DataSheet4U.com Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAA6046 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE:MAR/17/2005 DRAWN:H.Q.YUAN PAGE: 1 OF 4 ERP:1201000089 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA3020CGCK GREEN (InGaAIP) WATER CLEAR 18 Typ. 60 Viewing Angle 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 574 570 20 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAA6046 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE:MAR/17/2005 DRAWN:H.Q.YUAN PAGE: 2 OF 4 ERP:1201000089 Green AA3020CGCK SPEC NO: DSAA6046 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE:MAR/17/2005 DRAWN:H.Q.YUAN PAGE: 3 OF 4 ERP:1201000089 AA3020CGCK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA6046 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE:MAR/17/2005 DRAWN:H.Q.YUAN PAGE: 4 OF 4 ERP:1201000089