(75C1167 / 75C1168) DUAL DIFFERENTIAL DRIVERS AND RECEIVERS

SN65C1167, SN75C1167, SN65C1168, SN75C1168 DUAL DIFFERENTIAL DRIVERS AND RECEIVERS SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003 D Meet or Exceed Standards TIA/EIA-422-B D D D D D D D D D D and ITU Recommendation V.11 BiCMOS Process Technology Low Supply-Current Requirements: 9 mA Max Low Pulse Skew Receiver Input Impedance . . . 17 kΩ Typ Receiver Input Sensitivity . . . ±200 mV Receiver Common-Mode Input Voltage Range of −7 V to 7 V Operate From Single 5-V Power Supply Glitch-Free Power-Up/Power-Down Protection Receiver 3-State Outputs Active-Low Enable for SN65C1167 and SN75C1167 Only Improved Replacements for the MC34050 and MC34051 SN65C1167 . . . DB OR NS PACKAGE SN75C1167 . . . DB, N, OR NS PACKAGE (TOP VIEW) 1B 1A 1R RE 2R 2A 2B GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC 1D 1Y 1Z DE 2Z 2Y 2D SN65C1168 . . . N, NS, OR PW PACKAGE SN75C1168 . . . DB, N, NS, OR PW PACKAGE (TOP VIEW) description/ordering information The SN65C1167, SN75C1167, SN65C1168, and SN75C1168 dual drivers and receivers are integrated circuits designed for balanced transmission lines. The devices meet TIA/EIA-422-B and ITU recommendation V.11. ORDERING INFORMATION TA PDIP (N) SOP (NS) SSOP (DB) PDIP (N) 0°C to 70°C SOP (NS) SSOP (DB) TSSOP (PW) SOP (NS) SSOP (DB) PDIP (N) −40°C to 85°C SOP (NS) TSSOP (PW) PACKAGE† Tube Tape and reel Tape and reel Tube Tape and reel Tape and reel Tube Tape and reel Tape and reel Tape and reel Tube Tape and reel Tube Tape and reel 1B 1A 1R 1DE 2R 2A 2B GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC 1D 1Y 1Z 2DE 2Z 2Y 2D www.DataSheet4U.com ORDERABLE PART NUMBER SN75C1167N SN75C1167NSR SN75C1167DBR SN75C1168N SN75C1168NSR SN75C1168DBR SN75C1168PW SN75C1168PWR SN65C1167NSR SN65C1167DBR SN65C1168N SN65C1168NSR SN65C1168PW SN65C1168PWR TOP-SIDE MARKING SN75C1167N 75C1167 CA1167 SN75C1168N 75C1168 CA1168 CA1168 65C1167 CB1167 SN65C1168N 65C1168 CB1168 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright  2003, Texas Instruments Incorporated POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN65C1167, SN75C1167, SN65C1168, SN75C1168 DUAL DIFFERENTIAL DRIVERS AND RECEIVERS SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003 description/ordering information (continued) The SN65C1167 and SN75C1167 combine dual 3-state differential line drivers and 3-state differential line receivers, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can be connected together externally to function as direction control. The SN65C1168 and SN75C1168 drivers have individual active-high enables. Function Tables EACH DRIVER INPUT D H L X ENABLE DE H H L OUTPUTS Y H L Z Z L H Z SN75C1167, EACH RECEIVER DIFFERENTIAL INPUTS A−B VID ≥ 0.2 V −0.2 V < VID < 0.2 V VID ≤ −0.2 V X Open ENABLE RE L L L H L OUTPUT R H ? L Z H H = high level, L = low level, ? = indeterminate, X = irrelevant, Z = high impedance (off) logic diagram (positive logic) SN65C1167/SN75C1167 12 1DE 4 RE 15 14 13 2 1 10 11 6 7 1Y 1Z 1A 1B 2Y 2Z 2A 2B 2R 5 15 1D 3 1R 12 2DE 2D 9 10 11 6 7 SN65C1168, SN75C1168 4 14 13 2 1 1Y 1Z 1A 1B 2Y 2Z 2A 2B DE 1D 3 1R 9 2D 5 2R 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN65C1167, SN75C1167, SN65C1168, SN75C1168 DUAL DIFFERENTIAL DRIVERS AND RECEIVERS SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003 schematics of inputs EQUIVALENT OF DRIVER ENABLE INPUT VCC VCC EQUIVALENT OF A OR B INPUT 17 kΩ NOM Input Input 288 kΩ NOM VCC (A) or GND (B) GND 1.7 kΩ NOM 1.7 kΩ NOM GND schematics of outputs TYPICAL OF EACH DRIVER OUTPUT VCC TYPICAL OF EACH RECEIVER OUTPUT VCC Output Output GND GND POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN65C1167, SN75C1167, SN65C1168, SN75C1168 DUAL DIFFERENTIAL DRIVERS AND RECEIVERS SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Input voltage range, VI (A or B, Receiver) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −11 V to 14 V Differential input voltage range, VID, Receiver (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −14 V to 14 V Output voltage range, VO, Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −5 V to 7 V Clamp current range, IIK or IOK, Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output current range, IO, Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±150 mA Supply current, ICC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA GND current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −200 mA Output current range, IO, Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Package thermal impedance, θJA (see Notes 3 and 4): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . 82°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 108°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values except differential input voltage are with respect to the network GND. 2. Differential input voltage is measured at the noninverting terminal with respect to the inverting terminal. 3. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Selecting the maximum of 150°C can affect reliability. 4. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions MIN VCC VIC VID VIH VIL IOH IOL TA Supply voltage Common-mode input voltage (see Note 5) Differential input voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Operating free-air temperature Receiver Receiver Except A, B Except A, B Receiver Driver Receiver Driver SN75C1167, SN75C1168 SN65C1167, SN65C1168 0 −40 2 0.8 −6 −20 6 20 70 85 mA °C mA 4.5 NOM 5 MAX 5.5 ±7 ±7 UNIT V V V V V NOTE 5: Refer to TIA/EIA-422-B for exact conditions. 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN65C1167, SN75C1167, SN65C1168, SN75C1168 DUAL DIFFERENTIAL DRIVERS AND RECEIVERS SLLS159E − MARCH 1993 − REVISED NOVEMBER 2003 DRIVER SECTION electrical characteristics over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER VIK VOH VOL |VOD1| |VOD2| ∆|VOD| VOC ∆|VOC| IO(OFF) IOZ IIH IIL IOS ICC Input clamp voltage High-level output voltage Low-level output voltage Differential output voltage Differential output voltage Change in magnitude of differential output voltage Common-mode output voltage Change in magnitude of common-mode output voltage Output current with power off (see Note 3) High-impedance-state output current High-level input current Low-level input current Short-circuit output current Supply current (total package) VCC = 0 V VO = 2.5 V VO = 5 V VI = VCC or VIH VI = GND or VIL VO = VCC or GND, See Note 6 VI = VCC or GND No load, Enabled VI = 2.4 or 0.5 V, See Note 7 −30 4 5 VO = 6 V VO = −0.25 V II = −18 mA VIH = 2 V, VIH = 2 V, IO = 0 mA TEST CONDITIONS VIL = 0.8 V, VIL = 0.8 V, IOH = −20 mA IOL = 20 mA MIN 2.4 2 2 3.1 ±0.4 RL = 100 Ω, See Figure 1 and Note 5 ±3 ±0.4 100 −100 20 −20 1 −1 −150 6 9 mA TYP† 3.4 0.2 0.4 6 MAX −1.5 UNIT V V V V V V V V µA µA µA A µA µA mA Ci Input capacitance 6 pF † All typical values are at VCC = 5 V and TA = 25°C. NOTES: 5. Refer to TIA/EIA-422-B for exact conditions. 6. Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. 7. This parameter is measured per input, while the other inputs are at VCC or GND. switching characteristics over recommended ranges of supply voltage and operating free-air temperature (unless other