Wet Tantalum Capacitors

www.DataSheet4U.com 735D, 735DE, CT79 (CECC 30202) Vishay Tansitor Wet Tantalum Capacitors with Glass to Tantalum Hermetic Seal CECC 30202 Approved FEATURES • For - 55°C to + 200°C operation • All tantalum case • Glass to tantalum hermetic seal • Low ESR • High CV per unit volume • Extremely low leakage current • High permissible ripple current • 3 volts reverse voltage capability PERFORMANCE CHARACTERISTICS Operating Temperature: - 55°C to + 85°C. (To + 200°C with voltage derating.) APPROVALS • CECC-30202-001 style 735D • CECC-30202-801 style 735DE • CECC 30202-005 style CT79 Capacitance Tolerance: At 120 Hz, + 25°C. ± 20% standard. ± 10%, ± 5% available as special. DC Leakage Current (DCL Max.): At + 25°C and above: Leakage current shall not exceed the values listed in the Standard Ratings Tables. APPLICATIONS • Designed specifically for the severe operating environment of aerospace applications, this capacitor was developed under partial sponsorship of the Marshall Space Flight Center, National Aeronautics and Space Administration. To meet aerospace requirements, the capacitors have a high resistance to damage from shock and vibration. ORDERING INFORMATION CT79 735D 735DE MODEL 226 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 CAPACITANCE TOLERANCE X0 = ± 20% X9 = ± 10% X5 = ± 5% 025 DC VOLTAGE RATING AT + 85°C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 volts). A CASE CODE See Table of Dimensions. 2 STYLE NUMBER 0 = Bare case. 2 = Outer plastic film insulation. 6 = High temperature film insulation (above + 125°C). Packaging: The use of formed plastic trays for packaging this type of axial lead component is standard. Tape and reel is not recommended due to the unit weight. www.vishay.com 46 For technical questions, contact eurowettant@vishay.com Document Number: 40053 Revision 17-Oct-03 735D, 735DE, CT79 (CECC 30202) Wet Tantalum Capacitors with Glass to Tantalum Hermetic Seal CECC 30202 Approved DIMENSIONS in inches [millimeters] E L1 E D Vishay Tansitor 0.0253 ± 0.002 [0.64 ± 0.05] Dia. (No. 22 AWG) Tinned Nickel Leads Solderable and Weldable Weld L2 Tantalum CASE CODE TYPE 735D A B C D CLR 79/81 EQUIV. T1 T2 T3 T4 D 0.188 ± 0.016 [4.78 ± 0.41] 0.281 ± 0.016 [7.14 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] L1 0.453 + 0.031 - 0.016 [11.51 + 0.79 - 0.41] 0.641 + 0.031 - 0.016 [16.28 + 0.79 - 0.41] 0.766 + 0.031 - 0.016 [19.46 + 0.79 - 0.41] 1.062 + 0.031 - 0.016 [26.97 + 0.79 - 0.41] L2 (Max.) 0.734 [18.64] 0.922 [23.42] 1.047 [26.59] 1.343 [34.11] E 1.500 ± 0.250 [38.10 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] WEIGHT IN GRAMS (Max.) 2.6 6.2 11.6 17.7 *For insulated parts, add 0.007" [0.178] to the diameter. The insulation shall lap over the ends of the capacitor body. STANDARD RATINGS CASE CODE A A A B B B C D C D A A A A B B B B C D D C C D D MAX DF at + 20°C (%) 15 21 34 40 90 106 50 72 172 170 13 21 25 30 30 30 65 74 44 46 57 92 137 114 138 MAX DCL MAX IMP. IN µA at MAX CAP. CHANGE at - 55°C + 85°C & (%) at (Ω) + 20°C + 125°C - 55°C + 85°C + 125°C 60 81 80 30 46 48 25 22 36 22 100 85 84 82 45 40 52 54 25 20 22 36 36 23 24 1.0 1.5 2.0 1.0 2.0 2.0 2.0 3.0 5.0 6.0 1.0 1.5 2.0 2.0 1.0 1.0 2.0 2.0 2.0 3.0 3.0 4.0 5.0 7.0 7.0 2.0 3.0 9.0 6.5 10 10 16 14 20 24 2.0 3.0 6.0 6.0 7.0 7.0 10 10 15 16 16 16 20 25 25 -40 -41 -42 -44 -60 -68 -64 -80 -90 -90 -36 -40 -40 -40 -32 -35 -54 -60 -65 -80 -80 -80 -80 -88 -88 +14 +15 +16 +16 +20 +20 +18 +25 +25 +25 +14 +15 +16 +16 +14 +14 +17 +19 +18 +25 +25 +25 +25 +30 +30 +16 +16 +16 +18 +20 +20 +20 +25 +25 +25 +16 +16 +16 +16 +16 +16 +18 +20 +20 +25 +25 +25 +25 +30 +30 MAX RMS RIPPLE CURRENT 40KHz (mA) 960 820 820 1370 1285 1255 1900 2390 1615 2265 855 820 820 820 1275 1300 1195 1195 1800 2490 2360 1720 1720 2360 2360 www.vishay.com 47 µF 68 120 150 220 470 560 560 1000 1500 2200 47 68 82 100 150 180 330 390 470 680 820 1000 1200 1500 1800 PART NUMBER 735D686X06R3A2 735D127X06R3A2 735D157X06R3A2 735D227X06R3B2 735D477X06R3B2 735D567X06R3B2 735D567X06R3C2 735D108X06R3D2 735D158X06R3C2 735D228X06R3D2 735D476X0010A2 735D686X0010A2 735D826X0010A2 735D107X0010A2 735D157X0010B2 735D187X0010B2 735D337X0010B2 735D397X0010B2 735D477X0010C2 735D687X0010D2 735D827X0010D2 735D108X0010C2 735D128X0010C2 735D158X0010D2 735D188X0010D2 6.3VDC at + 85°C, 4V at + 125°C, 3VDC at + 200°C 10VDC at + 85°C, 7VDC at + 125°C, 5VDC at + 200°C Document Number: 40053 Revision 17-Oct-03 For technical questions, contact eurowettant@vishay.com 735D, 735DE, CT79 (CECC 30202) Vishay Tansitor STANDARD RATINGS MAX DF at + 20°C (%) 10 20 22 25 42 55 40 37 40 80 95 92 103 7 11 13 16 21 35 35 35 30 48 35 48 60 60 82 7 10 11 15 25 30 23 23 37 43 43 45 MAX DCL MAX IMP. IN µA at MAX CAP. CHANGE at - 55°C + 85°C & (%) at (Ω) + 20°C + 125°C - 55°C + 85°C + 125°C 90 100 100 50 62 60 30 24 23 42 42 25 25 140 140 130 120 50 62 60 33 27 48 24 48 48 24 26 175 200 190 60 60 62 35 27 52 52 30 30 1.0 1.5 1.5 1.0 2.0 2.0 2.0 3.0 3.0 5.0 6.0 8.0 8.0 1.0 1.5 1.5 2.0 1.0 2.0 2.0 2.0 3.0 7.0 3.0 7.0 7.0 8.0 8.0 1.0 1.5 1.5 1.0 2.0 2.0 2.0 3.0 7.0 8.0 8.0 9.0 2.0 3.0 3.0 7.0 10 12 14 18 18 20 24 32 32 2.0 3.0 3.0 9.0 9.0 10 10 13 20 28 20 28 28 32 32 2.0 4.0 4.0 8.0 10 12 12 22 28 32 32 36 -28 -28 -28 -28 -35 -45 -58 -75 -80 -80 -80 -82 -84 -20 -20 -24 -28 -28 -35 -48 -52 -60 -70 -68 -76 -80 -80 -80 -20 -20 -24 -24 -40 -32 -48 -58 -60 -65 -75 -80 +14 +16 +16 +14 +16 +18 +18 +25 +25 +25 +25 +25 +25 +10 +12 +14 +16 +13 +15 +14 +18 +25 +25 +25 +25 +25 +25 +25 +10 +12 +12 +13 +15 +15 +14 +23 +25 +25 +25 +25 +16 +16 +16 +16 +16 +18 +20 +25 +25 +25 +25 +25 +30 +12 +12 +14 +16 +15 +15 +15 +20 +25 +25 +25 +25 +25 +25 +25 +12 +12 +12 +15 +15 +15 +15 +23 +25 +25 +25 +25 MAX RMS RIPPLE CURRENT 40KHz (mA) 820 760 760 1230 1215 1215 1760 2100 2300 1585 1585 2300 2300 800 715 715 715 1215 1130 1130 1615 1865 1400 2025 1400 1400 1940 1865 660 580 580 1285 1285 1245 1525 1900 1375 1375 1900 1900 Document Number: 40053 Revision 17-Oct-03 Wet Tantalum Capacitors with Glass to Tantalum Hermetic Seal CECC 30202 Approved µF 33 47 56 120 220 270 330 470 560 680 820 1000 1200 22 27 33 39 100 150 180 220 330 390 390 470 560 680 820 15 18 22 68 100 120 150 220 270 330 390 470 CASE CODE A A A B B B C D D C C D D A A A A B B B C D C D C C D D A A A B B B C D C C D D PART NUMBER 735D336X0016A2 735D476X0016A2 735D566X0016A2 735D127X0016B2 735D227X0016B2 735D277X0016B2 735D337X0016C2 735D477X0016D2 735D567X0016D2 735D687X0016C2 735D827X0016C2 735D108X0016D2 736D128X0016D2 735D226X0025A2 735D276X0025A2 735D336X0025A2 735D396X0025A2 735D107X0025B2 735D157X0025B2 735D187X0025B2 735D227X0025C2 735D337X0025D2 735D397X0025C2 735D397X0025D2 735D477X0025C2 735D567X0025C2 735D687X0025D2 735D827X0025D2 735D156X0040A2 735D186X0040A2 735D226X0040A2 735D686X0040B2 735D107X0040B2 735D127X0040B2 735D157X0040C2 735D227X0040D2 735D277X0040C2 735D337X0040C2 735D397X0040D2 735D477X0040D2 16VDC at + 85°C, 10VDC at + 125°C, 8VDC at + 200°C 25VDC at + 85°C, 16VDC at + 125°C, 12VDC at + 200°C 40VDC at + 85°C, 25VDC at + 125°C, 20VDC at + 200°C www.vishay.com 48 For technical questions, contact eurowettant@vishay.com 735D, 735DE, CT79 (CECC 30202) Wet Tantalum Capacitors with Glass to Tantalum Hermetic Seal CECC 30202 Approved STANDARD RATINGS CASE CODE A A A B B B C C D C D D A A B B B C C C D C D C D A A B B C B C C C C D D D A A A B B C C D D MAX DF at + 20°C (%) MAX DCL MAX IMP. IN µA at MAX CAP. CHANGE at - 55°C + 85°C & (%) at (Ω) + 20°C + 125°C - 55°C + 85°C + 125°C +9 +9 +9 +15 +15 +15 +15 +18 +20 +25 +25 +25 +9 +9 +12 +14 +15 +15 +15 +18 +20 +20 +22 +22 +22 +8 +8 +8 +8 +8 +12 +8 +10 +15 +15 +15 +18 +20 +8 +8 +8 +8 +8 +8 +10 +15 +18 MAX RMS RIPPLE CURRENT 40KHz (mA) 575 575 565 1150 1150 1150 1420 1420 1865 1345 1850 1850 610 610 1079 1055 1055 1525 1335 1335 1915 1335 1915 1335 1850 565 530 1065 1065 1200 1065 1285 1390 1335 1335 1860 1860 1860 455 495 495 1050 1065 1285 1285 1860 1860 www.vishay.com 49 Vishay Tansitor µF 10 12 15 47 56 82 100 120 150 220 270 330 6.8 8.2 33 47 68 68 82 100 120 150 150 180 220 4.7 5.6 22 33 33 39 39 47 56 68 68 82 100 2.7 3.3 3.9 15 18 39 47 68 82 PART NUMBER 735D106X0063A2 735D126X0063A2 735D156Xo063A2 735D476X0063B2 735D566X0063B2 735D826X0063B2 735D107X0063C2 735D127X0063C2 735D157X0063D2 735D227X0063C2 735D277X0063D2 735D337X0063D2 735D685X0075A2 735D825X0075A2 735D336X0075B2 735D476X0075B2 735D686X0075B2 735D686X0075C2 735D826X0075C2 735DI07X0075C2 735DI27X0075D2 735DI57X0075C2 735Dl57X0075D2 735DI87X0075C2 735D227X0075D2 735D475X0100A2 735D565X0100A2 735D226X0100B2 735D336X0100B2 735D336X0100C2 735D396X0100B2 735D396X0100C2 735D476X0100C2 735D566X0100C2 735D686X0100C2 735D686X0100D2 735D826X0100D2 735D107X0100D2 735D275X0125A2 735D335X0125A2 735D395X0125A2 735D156X0125B2 735D186X0125B2 735D396X0125C2 735D476X0125C2 735D686X0125D2 735D826X0125D2 63VDC at + 85°C, 40VDC at + 125°C, 31VDC at + 200°C 4 250 1.0 2.0 -20 +8 7 233 2.0 4.0 -20 +8 8 220 2.0 9.0 -22 +9 13 70 1.0 9.0 -24 +13 18 72 2.0 12 -26 +14 22 70 2.0 12 -36 +15 18 42 2.0 11 -37 +14 20 49 3.0 18 -40 +18 17 27 3.0 22 -45 +20 37 55 8.0 32 -50 +25 26 33 9.0 36 -70 +24 32 31 10 40 -72 +25 75VDC at + 85°C, 50VDC at + 125°C, 37VDC at + 200°C 3 300 1.0 2.0 -20 +8 6 280 1.5 3.0 -22 +9 10 90 1.0 9.0 -24 +10 15 87 2.0 10 -30 +14 21 86 2.0 12 -36 +15 13 50 2.0 10 -30 +14 15 45 2.0 10 -32 +15 19 60 8.0 32 -36 +17 12 28 3.0 24 -36 +20 25 60 9.0 36 -40 +20 17 30 9.0 36 -48 +21 28 60 9.0 36 -50 +22 37 32 10 40 -60 +22 100VDC at + 85°C, 70VDC at + 125°C, 50VDC at + 200°C 3 500 1.0 2.0 -16 +7 6 475 2.0 5.0 -17 +8 8 100 1.0 9.0 -16 +8 14 95 3.0 15 -16 +8 7 93 2.0 10 -1