www.DataSheet4U.com
C&K 7000 Series Rocker and Lever Handle Switches
S S S S S S
Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Telecommunications Instrumentation Medical equipment
Features/Benefits
Models Available
Typical Applications
Build-A-Switch
Our easy Build-A-Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. Switches with standard options are shown on pages F-4 and F-5. Available options are shown and described on pages F-6 thru F-22. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Typical Example:
Switch Function 7101 (STD.) SP On None On 7103 (STD.) SP On Off On 7201 (STD.) DP On None On 7301 (STD.) 3P On None On 7401 (STD.) 4P On None On 7105 SP Mom. Off Mom. 7107 SP On Off Mom. 7108 SP On None Mom. 7109 SP None On Mom. 7203 DP On Off On 7205 DP Mom. Off Mom. 7207 DP On Off Mom. 7208 DP On None Mom. 7209 DP None On Mom. 7211 DP On On On 7213 DP On On Mom. 7215 DP Mom. On Mom. 7303 3P On Off On 7305 3P Mom. Off Mom. 7307 3P On Off Mom. 7308 3P On None Mom. 7309 3P None On Mom. 7403 4P On Off On 7405 4P Mom. Off Mom. 7407 4P On Off Mom. 7408 4P On None Mom. 7409 4P None On Mom. 7411 4P On On On 7413 4P On On Mom. 7415 4P Mom. On Mom. Note: UL/CSA models
available, see page F-6.
7
1 0
1
J
1
Z
Q
E
2
Actuator J1 (STD.) Rocker J2 Lever J3 Rocker J8 Rocker J10 Rocker J11 Rocker with frame J15 Rocker with frame, snap in J16 Rocker, snap in J19 Rocker with frame J21 Lever with frame J25 Lever, snap in J26 Lever with frame, snap in J37 Rocker with frame J50 Rocker J51 Rocker with frame J52 Rocker with frame & LED, snap in J53 Rocker, snap in J60 Lever J61 Lever with frame, snap in J62 Lever with frame & LED, snap in J63 Lever, snap in J76 Rocker with frame, snap in J90 Lever J91 Lever with frame, snap in J92 Lever with frame & LED, snap in J93 Lever, snap in
Contact Material B (STD.) Gold Q (STD.) Silver K Gold Terminations M Silver A (STD.) Right angle, PC thru hole G Gold over silver AV2 (STD.) Vertical right angle, PC thru hole L Gold over silver C (STD.) PC Thru hole Seal Z (STD.) Solder lug E (STD.) Epoxy A3 Right angle, snap in, PC thru hole I Epoxy potted base AV3 Vertical right angle, snap in, PC thru hole Actuator Color AW Right angle, extended, PC thru hole 2 (STD.) Black AW1 Right angle, extended, PC thru hole 1 White AW3 Right angle, extended, PC thru hole 3 Red AW4 Right angle, extended, PC thru hole Frame Color V2 .555 high, V bracket 2 (STD.) Black V3 .460 high, V bracket NONE No frame color required V4 .630 high, V bracket 1 White V5 Vertical right angle, PC thru hole 3 Red V6 .460 high, V bracket V7 V8 V9 V21 V31 V41 V51 V54 V55 V61 V71 V81 V91 .630 high, V bracket .953 high, V bracket 1.150 high, V bracket .555 high, V bracket, snap in .460 high, V bracket, snap in .630 high, V bracket, snap in Vertical right angle, snap in Vertical right angle, extended Vertical right angle, extended .460 high, V bracket, snap in .630 high, V bracket, snap in .953 high, V bracket, snap in 1.150 high, V bracket, snap in Metal Frame Color (J11, J19, J21, J37 Actuators) 2 (STD.) Black 1 White C Bright chrome S Satin chrome W W1 W3 W4 W5 Z3 .750 long, wire wrap .964 long, wire wrap .425 long, wire wrap 1.062 long, wire wrap 1.305 long, wire wrap Quick connect
F Rocker
ITT Industries
Cannon
F-3 www.ittcannon.com
www.DataSheet4U.com
C&K 7000 Series Rocker and Lever Handle Switches
Specifications Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DAP) (UL 94V-0). ACTUATOR: Nylon, black. FRAME (FRONT MOUNT): Nylon, black. FRAME (REAR MOUNT): Spring steel, black. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page F-22 for additional contact materials. CENTER CONTACTS & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-22 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless steel. Standoff: Nylon standard, aluminum available, consult Customer Service Center.
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page F-22 for additional ratings. ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break cycles at full load. All other models: 40,000 cycles. CONTACT RESISTANCE: Below 10 milliohms typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 ohms min. DIELECTRIC STRENGTH: 1000 V RMS min. @ sea level. OPERATING TEMPERATURE: –30_C to 85_C. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging).
NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.
SWITCHES WITH STANDARD OPTIONS
POS. 1
POS. 2
POS. 3
PART NUMBER
7101J1ZQE2
ON
NOTE: For PC termination, replace ‘Z’ with ‘C’. For panel mounting information, see page F-7.
7101J1ZQE2
SPDT
POS. 1
F Rocker
PART NUMBER
7201J1ZQE2
ON
NOTE: For PC termination, replace ‘Z’ with ‘C’. For panel mounting information, see page F-7.
7201J1ZQE2
DPDT
ITT Industries
Cannon
F-4 www.ittcannon.com
ÑÑÑ ÑÑÑ
NONE POS. 2
ON
POS. 3
ÑÑÑ ÑÑÑ
NONE
ON
www.DataSheet4U.com
C&K 7000 Series Rocker and Lever Handle Switches
SWITCHES WITH STANDARD OPTIONS
POS. 1
POS. 2
POS. 3
PART NUMBER
7301J1ZQE2
ON
NOTE: For PC termination, replace ‘Z’ with ‘C’. For panel mounting information, see page F-7.
POS. 1
PART NUMBER
7401J1ZQE2
ON
NOTE: For PC termination, replace ‘Z’ with ‘C’. For panel mounting information, see page F-7.
POS. 1
PART NUMBER
7101J1ABE2 7101J1AQE2 7103J1ABE2
ON ON ON
NOTE: For PC mounting information, see page F-15.
POS. 1
PART NUMBER
7301J1AV2QE2
ON
NOTE: For PC mounting information, see page F-17. SECTION A-A
ITT Industries
ÑÑÑ ÑÑÑ
ÑÑ ÑÑ
NONE POS. 2
ON
7301J1ZQE2
3PDT
POS. 3
ÑÑ ÑÑ
NONE POS. 2
ON
7401J1ZQE2
4PDT
POS. 3
ÑÑ ÑÑ
NONE NONE OFF POS. 2 NONE
ON ON ON SECTION A-A
7101J1ABE2 Horizontal Actuation
SPDT
F
POS. 3
Rocker
ON
7301J1AV2QE2 Vertical Actuation
3PDT
Cannon
F-5 www.ittcannon.com
www.DataSheet4U.com
C&K 7000 Series Rocker and Lever Handle Switches
SWITCH FUNCTION
SWITCH FUNCTION POS. 1 NO. POLES UL/CSA** MODEL NO. POS. 2 POS. 3 POS. 1
CONNECTED TERMINALS POS. 2 POS. 3
MODEL NO.
7101 (STD.) 7103 (STD.) 7105
SP
U11 U13 U15 U17 U18 U19 U21 U23 U25 U27 U28 U29 U211* U213* U215* U31 U33 U35 U37 U38 U39 U41 U43 U45 U47 U48 U49 U411* U413* U415*
ON ON MOM. ON ON NONE ON ON MOM. ON ON NONE ON ON MOM. ON ON MOM. ON ON NONE ON ON MOM. ON ON NONE ON ON MOM.
7107 7108 7109 7201 (STD.) 7203 7205 7207
DP
7208 7209 7211* 7213* 7215* 7301 (STD.) 7303 7305
3P
7307 7308 7309 7401 (STD.) 7403 7405 7407
4P
7408 7409 7411* 7413* 7415*
MOM. = Momentary **U11-U415 model nos. with all options when ordered with G, L, M or Q contact material.
F Rocker
ITT Industries
Cannon
F-6 www.ittcannon.com
ÑÑÑ ÑÑÑ
NONE OFF OFF OFF NONE ON NONE OFF OFF OFF NONE ON ON ON ON NONE OFF OFF OFF NONE ON NONE OFF OFF OFF NONE ON ON ON ON
SCHEMATIC ON ON MOM. MOM. MOM. MOM. ON ON MOM. MOM. MOM. MOM. ON MOM. MOM. ON ON MOM. MOM. MOM. MOM. ON ON MOM. MOM. MOM. MOM. ON MOM. MOM. 2 3,5 6,8 9,11 12 2-3,5-6,8-9,11-12 2 3,5 4,8 9,11 10 2-3,5-4,8-9,11-10 2 1,5 4,8 7,11 10 2-1,5-4,8-7,11-10 4PDT * Wiring for 3-way switch, see page L-29. N/A 2-3,5-6,8-9,11-12 2-1,5-4,8-7,11-10 2 3,5 6,8 9,11 12 2-3,5-6,8-9,11-12 OPEN 2 1,5 4,8 7,11 10 2-1,5-4,8-7,11-10 N/A 2-3,5-6,8-9 2-1,5-4,8-7 3PDT 2-3,5-6,8-9 2 3,5 6,8 9 OPEN 2-1,5-4,8-7 2 1,5 4,8 7 2 3,5 6 2-3,5-6 2 3,5 4 2-3,5-4 2 1,5 4 2-1,5-4 DPDT N/A 2-3,5-6 2-1,5-4 2 3,5 6 2-3,5-6 OPEN 2 1,5 4 2-1,5-4 N/A 2-3 2-1 SPDT 23 2-3 OPEN 21 2-1
www.DataSheet4U.com
C&K 7000 Series Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR—PANEL REAR MOUNT
ACTUATOR
J1
OPTION CODE ACTUATOR COLOR (STD.) BLACK WHITE RED
(STD.) ROCKER
2 1 3
Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on all switches with panel mounting brackets. Hardware is available separately, see section L. J1, J2, J3, J8 & J10 Actuators available with C, W-W5, Z or Z3 terminations. PANEL MOUNTING J1 & J2 Actuators
J2
LEVER
J3
ROCKER DIMPLES MFG. OPTION
J3 Actuator
J8
ROCKER
J8 Actuator
J10
J10 Actuator
ROCKER
DIMPLES MFG. OPTION
F Rocker
ITT Industries
Cannon
F-7 www.ittcannon.com
www.DataSheet4U.com
C&K 7000 Series Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR FRAME COLOR
J15
ROCKER WITH FRAME, SNAP-IN
No frame color choice required.
J16
ROCKER, SNAP-IN
OPTION CODE
ACTUATOR COLOR (STD.) BLACK WHITE RED
2 1 3
OPTION CODE
FRAME COLOR (STD.) BLACK No Frame Color (J15 or J25 options) WHITE RED
2
J25
LEVER, SNAP-IN
NONE 1 3
Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Frames are available separately, see section L. J15, J16, J25, J26 & J76 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminati
