Quad 2-Input OR Gate

www.DataSheet4U.com 54AC32 Quad 2-Input OR Gate July 1998 54AC32 Quad 2-Input OR Gate General Description The ’AC/’ACT32 contains four, 2-input OR gates. n Outputs source/sink 24 mA n ’ACT32 has TTL-compatible inputs n Standard Military Drawing (SMD) — ’AC32: 5962-87614 n For Military 54ACT32, see the 54ACTQ32 Features n ICC reduced by 50% on 54AC/74AC only Logic Symbol IEEE/IEC DS100265-1 Connection Diagrams Pin Assignment for DIP and Flatpak Pin Assignment for LCC DS100265-3 DS100265-2 Pin Names An, Bn On Inputs Outputs Description FACT™ is a trademark of Fairchild Semiconductor Corporation. © 1998 National Semiconductor Corporation DS100265 www.national.com Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V Junction Temperature (TJ) CDIP 175˚C Recommended Operating Conditions Supply Voltage (VCC) ’AC Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54AC Minimum Input Edge Rate (∆V/∆t) ’AC Devices VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V 2.0V to 6.0V 0V to VCC 0V to VCC −55˚C to +125˚C ± 50 mA ± 50 mA −65˚C to +150˚C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT™ circuits outside databook specifications. DC Characteristics for ’AC Family Devices Symbol Parameter VCC (V) 54AC TA = −55˚C to +125˚C Guaranteed Limits VIH Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage 3.0 4.5 5.5 VIL 3.0 4.5 5.5 VOH 3.0 4.5 5.5 3.0 4.5 5.5 VOL Maximum Low Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 IIN IOLD IOHD ICC Maximum Input Leakage Current (Note 3) Minimum Dynamic Output Current Maximum Quiescent Supply Current 5.5 5.5 50 −50 mA mA VOLD = 1.65V Max VOHD = 3.85V Min VIN = VCC or GND 5.5 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 (Note 2) VIN = VIL or VIH 2.4 3.7 4.7 0.1 0.1 0.1 (Note 2) VIN = VIL or VIH 0.5 0.5 0.5 V µA VI = VCC, GND 12 mA IOL 24 mA 24 mA V IOUT = 50 µA V −12 mA IOH −24 mA −24 mA V IOUT = −50 µA V VOUT = 0.1V or VCC − 0.1V V VOUT = 0.1V or VCC − 0.1V Units Conditions ± 1.0 5.5 40.0 µA www.national.com 2 DC Characteristics for ’AC Family Devices Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. (Continued) Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ICC for 54AC @ 25˚C is identical to 74AC @ 25˚C. AC Electrical Characteristics VCC Symbol Parameter (V) (Note 5) Min tPLH tPHL Propagation Delay Propagation Delay 3.3 5.0 3.3 5.0 Note 5: Voltage Range 3.3 is 3.3V ± 0.3V Voltage Range 5.0 is 5.0V ± 0.5V 54AC TA = −55˚C to +125˚C CL = 50 pF Max 12.0 9.0 11.5 8.5 ns ns 1.0 1.5 1.0 1.5 Units Fig. No. Capacitance Symbol CIN CPD Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 20.0 Units pF pF Conditions VCC = OPEN VCC = 5.0V 3 www.national.com Physical Dimensions inches (millimeters) unless otherwise noted 20 Terminal Ceramic Leadless Chip Carrier (L) NS Package Number E20A www.national.com 4 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Ceramic Dual-In-Line Package (D) NS Package Number J14A 14-Lead Ceramic Flatpak (F) NS Package Number W14B 5 www.national.com 54AC32 Quad 2-Input OR Gate LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 www.national.com National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.