9-Bit Parity Generator/Checker

www.DataSheet4U.com 54AC280 9-Bit Parity Generator/Checker September 1998 54AC280 9-Bit Parity Generator/Checker General Description The ’AC280 is a high-speed parity generator/checker that accepts nine bits of input data and detects whether an even or an odd number of these inputs is HIGH. If an even number of inputs is HIGH, the Sum Even output is HIGH. If an odd number is HIGH, the Sum Even output is LOW. The Sum Odd output is the complement of the Sum Even output. Features n ICC reduced by 50% n 9-bit width for memory applications n Standard Microcircuit Drawing (SMD) 5962-92201 Logic Symbols Connection Diagrams Pin Assignment for DIP and Flatpak DS100359-1 IEEE/IEC DS100359-2 Pin Assignment for LCC DS100359-4 Pin Names I0–I8 ∑O ∑E Description DS100359-3 Data Inputs Odd Parity Output Even Parity Output Truth Table Number of HIGH Inputs I0–I8 0, 2, 4, 6, 8 1, 3, 5, 7, 9 H = HIGH Voltage Level L = LOW Voltage Level Outputs ∑ Even ∑ Odd H L L H FACT™ is a trademark of Fairchild Semiconductor Corporation. © 1998 National Semiconductor Corporation DS100359 www.national.com Logic Diagram DS100359-5 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.national.com 2 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) Junction Temperature (TJ) −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V CDIP 175˚C Recommended Operating Conditions Supply Voltage (VCC) ’AC Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54AC Minimum Input Edge Rate (∆V/∆t) ’AC Devices VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V 2.0V to 6.0V 0V to VCC 0V to VCC −55˚C to +125˚C ±50 mA ±50 mA −65˚C to +150˚C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, output/input loading variables. National does not recommend operation of FACT circuits outside databook specifications. DC Characteristics for ’AC Family Devices Symbol Parameter VCC (V) 54AC TA = −55˚C to +125˚C Guaranteed Limits VIH Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage VOH Minimum High Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 (Note 2) VIN = VIL or VIH 3.0 4.5 5.5 VOL Maximum Low Level Output Voltage 3.0 4.5 5.5 2.4 3.7 4.7 0.1 0.1 0.1 (Note 2) VIN = VIL or VIH 3.0 4.5 5.5 IIN IOLD IOHD Maximum Input Leakage Current Minimum Dynamic Output Current (Note 3) 5.5 5.5 50 −50 mA mA VOLD = 1.65V Max VOHD = 3.85V Min 5.5 0.50 0.50 0.50 V µA IOL = 12 mA IOL = 24 mA IOL = 24 mA VI = VCC, GND V V IOH = −12 mA IOH = −24 mA IOH = −24 mA IOUT = 50 µA V IOUT = −50 µA V VOUT = 0.1V or VCC − 0.1V V VOUT = 0.1V or VCC − 0.1V Units Conditions ±1.0 3 www.national.com DC Characteristics for ’AC Family Devices Symbol Parameter VCC (V) (Continued) 54AC TA = Units Conditions −55˚C to +125˚C Guaranteed Limits 80.0 µA VIN = VCC or GND ICC Maximum Quiescent Supply Current 5.5 Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. AC Electrical Characteristics VCC Symbol Parameter (V) (Note 5) Min tPLH tPHL tPLH tPHL Propagation Delay In to ∑E Propagation Delay In to ∑O 3.3 5.0 3.3 5.0 1.0 1.0 1.0 1.0 54AC TA = −55˚C to +125˚C CL = 50 pF Max 20.0 14.5 20.0 14.5 ns ns Units Note 5: Voltage range 3.3 is 3.3V ±0.3V. Voltage range 5.0 is 5.0V ±0.5V. Capacitance Symbol CIN CPD Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 75.0 Units pF pF Conditions VCC = OPEN VCC = 5.0V www.national.com 4 Physical Dimensions inches (millimeters) unless otherwise noted 20 Terminal Ceramic Leadless Chip Carrier NS Package Number E20A 14 Lead Ceramic Dual-In-Line Package NS Package Number J14A 5 www.national.com 54AC280 9-Bit Parity Generator/Checker Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14 Lead Ceramic Flatpak (F) NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 www.national.com National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.