Octal Bidirectional Transceiver

www.DataSheet4U.com 54AC245 • 54ACT245 Octal Bidirectional Transceiver with TRI-STATE Inputs/Outputs August 1998 54AC245 • 54ACT245 Octal Bidirectional Transceiver with TRI-STATE ® Inputs/Outputs General Description The ’AC/’ACT245 contains eight non-inverting bidirectional buffers with TRI-STATE outputs and is intended for bus-oriented applications. Current sinking capability is 24 mA at both the A and B ports. The Transmit/Receive (T/R) input determines the direction of data flow through the bidirectional transceiver. Transmit (active-HIGH) enables data from A ports to B ports; Receive (active-LOW) enables data from B ports to A ports. The Output Enable input, when HIGH, disables both A and B ports by placing them in a HIGH Z condition. Features n n n n n n ICC and IOZ reduced by 50% Noninverting buffers Bidirectional data path A and B outputs source/sink 24 mA ’ACT245 has TTL-compatible inputs Standard Microcircuit Drawing (SMD) — ’AC245: 5962-87758 — ’ACT245: 5962-87663 Logic Symbols IEEE/IEC DS100283-1 DS100283-2 Pin Names OE T/R A0–A7 B0–B7 Description Output Enable Input Transmit/Receive Input Side A TRI-STATE Inputs or TRI-STATE Outputs Side B TRI-STATE Inputs or TRI-STATE Outputs TRI-STATE ® is a registered trademark of National Semiconductor Corporation. FACT ® is a registered trademark of Fairchild Semiconductor Corporation. © 1998 National Semiconductor Corporation DS100283 www.national.com Connection Diagrams Pin Assignment for DIP and Flatpak Pin Assignment for LCC DS100283-4 Truth Table Inputs OE DS100283-3 Outputs T/R L H X Bus B Data to Bus A Bus A Data to Bus B HIGH-Z State L L H H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial www.national.com 2 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) Junction Temperature (TJ) CDIP −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V Recommended Operating Conditions Supply Voltage (VCC) ’AC ’ACT Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54AC/ACT Minimum Input Edge Rate (∆V/∆t) ’AC Devices VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V Minimum Input Edge Rate (∆V/∆t) ’ACT Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V 2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC −55˚C to +125˚C 125 mV/ns ± 50 mA ± 50 mA −65˚C to +150˚C 175˚C 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT ® circuits outside databook specifications. DC Characteristics for ’AC Family Devices Symbol Parameter VCC (V) 54AC TA = −55˚C to +125˚C Guaranteed Limits VIH Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage VOH Minimum High Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 (Note 2) VIN = VIL or VIH 3.0 4.5 5.5 VOL Maximum Low Level Output Voltage 3.0 4.5 5.5 2.4 3.7 4.7 0.1 0.1 0.1 (Note 2) VIN = VIL or VIH 3.0 4.5 5.5 IIN Maximum Input Leakage Current 5.5 0.50 0.50 0.50 V µA IOL 12 mA 24 mA 24 mA VI = VCC, GND V V IOH −12 mA −24 mA −24 mA IOUT = 50 µA V IOUT = −50 µA V VOUT = 0.1V or VCC − 0.1V V VOUT = 0.1V or VCC − 0.1V Units Conditions ± 1.0 3 www.national.com DC Characteristics for ’AC Family Devices Symbol Parameter VCC (V) (Continued) 54AC TA = −55˚C to +125˚C Guaranteed Limits Units Conditions IOLD IOHD ICC IOZT (Note 3) Minimum Dynamic Output Current Maximum Quiescent Supply Current Maximum I/O Leakage Current 5.5 5.5 5.5 50 −50 80.0 mA mA µA VOLD = 1.65V Max VOHD = 3.85V Min VIN = VCC or GND VI(OE) = VIL, VIH VI = VCC, GND VO = VCC, GND 5.5 ± 5.5 µA Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ICC for 54AC @ 25˚C is identical to 74AC @ 25˚C. DC Characteristics for ’ACT Family Devices Symbol Parameter VCC (V) 54ACT TA = −55˚C to +125˚C Guaranteed Limits VIH VIL VOH Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage 4.5 5.5 4.5 5.5 4.5 5.5 2.0 2.0 0.8 0.8 4.4 5.4 (Note 5) VIN = VIL or VIH 4.5 5.5 VOL Maximum Low Level Output Voltage 4.5 5.5 3.70 4.70 0.1 0.1 (Note 5) VIN = VIL or VIH 4.5 5.5 IIN ICCT IOLD IOHD ICC Maximum Input Leakage Current Maximum ICC/Input (Note 6) Minimum Dynamic Output Current Maximum Quiescent Supply Current 5.5 5.5 5.5 50 −50 80.0 mA mA µA VOLD = 1.65V Max VOHD = 3.85V Min VIN = VCC or GND 5.5 5.5 0.50 0.50 V µA mA IOL 24 mA 24 mA VI = VCC, GND VI = VCC − 2.1V V V IOH −24 mA −24 mA IOUT = 50 µA V V V VOUT = 0.1V or VCC − 0.1V VOUT = 0.1V or VCC − 0.1V IOUT = −50 µA Units Conditions ± 1.0 1.6 www.national.com 4 DC Characteristics for ’ACT Family Devices Symbol Parameter VCC (V) (Continued) 54ACT TA = −55˚C to +125˚C Guaranteed Limits Units Conditions IOZT Maximum I/O Leakage Current 5.5 ± 5.0 µA VI (OE) = VIL, VIH VI = VCC, GND VO = VCC, GND Note 5: All outputs loaded; thresholds on input associated with output under test. Note 6: Maximum test duration 2.0 ms, one output loaded at a time. Note 7: ICC for 54ACT @ 25˚C is identical to 74ACT @ 25˚C. AC Electrical Characteristics VCC Symbol Parameter (V) (Note 8) Min tPLH tPHL tPZH tPZL tPHZ tPLZ Propagation Delay An to Bn or Bn to An Propagation Delay An to Bn or Bn to An Output Enable Time Output Enable Time Output Disable Time Output Disable Time 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 Note 8: Voltage Range 3.3 is 3.3V ± 0.3V Voltage Range 5.0 is 5.0V ± 0.5V 54AC TA = −55˚C to +125˚C CL = 50 pF Max 11.5 8.5 10.0 7.5 13.5 10.0 14.5 10.5 13.5 10.5 14.0 10.5 ns ns ns ns ns ns 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Units Fig. No. AC Electrical Characteristics VCC Symbol Parameter (V) (Note 9) Min tPLH tPHL tPZH tPZL tPHZ tPLZ Propagation Delay An to Bn or Bn to An Propagation Delay An to Bn or Bn to An Output Enable Time Output Enable Time Output Disable Time Output Disable Time 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 12.0 13.0 12.0 12.0 ns ns ns ns 5.0 1.0 10.0 ns 5.0 1.0 54ACT TA = −55˚C to +125˚C CL = 50 pF Max 9.0 ns Units Note 9: Voltage Range 5.0 is 5.0V ± 0.5V 5 www.national.com Capacitance Symbol CIN CI/O CPD Parameter Input Capacitance Input/Output Capacitance Power Dissipation Capacitance 45.0 pF VCC = 5.0V Typ 4.5 15.0 Units pF pF Conditions VCC = OPEN VCC = 5.0V www.national.com 6 Physical Dimensions inches (millimeters) unless otherwise noted 20 Terminal Ceramic Leadless Chip Carrier (L) NS Package Number E20A 20-Lead Ceramic Dual-In-Line Package (D) NS Package Number J20A 7 www.national.com 54AC245 • 54ACT245 Octal Bidirectional Transceiver with TRI-STATE Inputs/Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Ceramic Flatpak (F) NS Package Number W20A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 www.national.com National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.