http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf


Kingtec
Kingtec

KT600 Datasheet

Oscillagraph User Manual


KT600 Datasheet Preview


www.DataSheet4U.com
KT600
OSCILLAGRAPH
USERS MANUAL
Page 1

KINGTEC
KT600 OSCILLAGRAPH
Safety Warning and Precautions
www.DataSheet4U.com
Please read this users manual carefully before using the instrument.
Operation of the instrument requires knowledge about automobile test and repair
and certain understanding about electric control system of the tested automobile.
Test under good ventilation; otherwise please extend vehicle pipeline to outdoor.
No smoking during operation of the tool.
Battery fluid of automobile contains sulfuric acid which is corrosive to skins. Direct
contact of battery fluid to skin should be avoided when operation, and special
attention should be paid to your eyes.
Engine has higher temperature when running, and contact to water tank, exhaust
pipe and other parts with high temperature should be avoided.
Before starting engine, apply hand brake and block front wheel specially, and place
the gear lever to P gear or Neutral to avoid bodily wound when starting engine.
If battery is used as power supply, it is imperative that red alligator clip connects to
positive and black alligator clip to negative.
When instrument is used in engine compartment, all power supply cables, pens and
tools should be away from belt or other moving parts.
Do not wear watch, ring or large clothes when working in engine compartment.
Always wear approved safety glasses during all automobile tests.
i
Page 2

KINGTEC
KT600 OSCILLAGRAPH
CONTENTS
PREFACE .............................................................................................................. B-1
I. EQUIPMENT INTRODUCTIONS ........................................................................ B-2
www.DataSheet4U.com
1.1 BASIC FUNCTIONS ..................................................................................... B-2
1.2 TECHNICAL FEATURES .............................................................................. B-2
1.3 EQUIPMENT CONFIGURATION AND PARAMETERS ................................ B-3
1.3.1 Main Unit ................................................................................................ B-3
1.3.2 Performance Parameter of Oscillograph ................................................ B-3
1.3.3 Hardware Configuration ......................................................................... B-3
1.4 EQUIPMENT STRUCTURE.......................................................................... B-4
1.4.1 KT600 Main Unit..................................................................................... B-4
1.4.2 Accessories ............................................................................................ B-6
II. BASIC FUNCTION AND OPERATION .............................................................. B-7
2.1 Overview of Main Menu............................................................................. B-7
2.2 Adjusting Method for Universal Oscillograph............................................. B-7
III. SENSOR TEST AND APPLICATION.............................................................. B-13
3.1 MANIFOLD ABSOLUTE PRESSURE SENSOR (MAP).............................. B-13
3.1.1 Connecting Equipment ......................................................................... B-13
3.1.2 Test conditions...................................................................................... B-14
3.1.3 Test step ............................................................................................... B-14
3.1.4 Waveform Analysis ............................................................................... B-14
3.2 OXYGEN SENSOR-ZIRCONIUM AND TITANIUM TYPE........................... B-16
3.2.1 Connecting Equipment ......................................................................... B-16
3.2.2 Test conditions...................................................................................... B-16
3.2.3 Test step ............................................................................................... B-17
3.2.4 Waveform Analysis ............................................................................... B-17
3.3 DOUBLE OXYGEN SENSOR..................................................................... B-18
3.3.1 Connecting Equipment ......................................................................... B-18
3.3.2 Test conditions...................................................................................... B-18
3.3.3 Test step ............................................................................................... B-19
3.3.4 Waveform Analysis ............................................................................... B-19
3.4 TEMPERATURE SENSOR ......................................................................... B-20
3.4.1 Connecting Equipment ......................................................................... B-20
3.4.2 Test conditions...................................................................................... B-20
3.4.3 Test step ............................................................................................... B-21
3.4.4 Waveform Analysis ............................................................................... B-21
ii
Page 3

KINGTEC
KT600 OSCILLAGRAPH
www.DataSheet4U.com
3.5 THROTTLE POSITION SENSOR ............................................................... B-22
3.5.1 Connecting Equipment ......................................................................... B-22
3.5.2 Test conditions...................................................................................... B-23
3.5.3 Test step ............................................................................................... B-23
3.5.4 Waveform Analysis ............................................................................... B-23
3.6 CRANKSHAFT/CAMSHAFT POSITION SENSOR ..................................... B-25
3.6.1 Connecting Equipment ......................................................................... B-25
3.6.2 Test conditions...................................................................................... B-26
3.6.3 Test step ............................................................................................... B-26
3.6.4 Waveform Analysis ............................................................................... B-27
3.7 RIDE HEIGHT (POSITION) SENSOR ........................................................ B-28
3.7.1 Connecting Equipment ......................................................................... B-28
3.7.2 Test conditions...................................................................................... B-28
3.7.3 Test step ............................................................................................... B-29
3.7.4 Waveform Analysis ............................................................................... B-29
3.8 VEHICLE SPEED SENSOR (VSS) ............................................................. B-30
3.8.1 Connecting Equipment ......................................................................... B-30
3.8.2 Test conditions...................................................................................... B-30
3.8.3 Test step ............................................................................................... B-30
3.8.4 Waveform Analysis ............................................................................... B-31
3.9 ANTI-LOCK BRAKING SPEED SENSOR................................................... B-32
3.9.1 Connecting Equipment ......................................................................... B-32
3.9.2 Test conditions...................................................................................... B-33
3.9.3 Test step ............................................................................................... B-33
3.9.4 Waveform Analysis ............................................................................... B-34
IV. AIR/FUEL ........................................................................................................B-35
4.1 AIR FLOW SENSOR................................................................................... B-35
4.1.1 Connecting Equipment ......................................................................... B-35
4.1.2 Test conditions...................................................................................... B-36
4.1.3 Test step ............................................................................................... B-36
4.1.4 Waveform Analysis ............................................................................... B-37
4.2.1 Connecting Equipment ......................................................................... B-38
4.2.2 Test conditions...................................................................................... B-38
4.2.3 Test step ............................................................................................... B-39
4.2.4 Waveform Analysis ............................................................................... B-39
4.3 FUEL INJECTION (FI) ................................................................................ B-39
4.3.1 Connecting Equipment ......................................................................... B-40
4.3.2 Test conditions...................................................................................... B-41
iii
Page 4
Part Number KT600
Manufactur Kingtec
Description Oscillagraph User Manual
Total Page 70 Pages
PDF Download
KT600 datasheet
Download PDF File
KT600 datasheet
View Html for PC & Mobile


Related Datasheet

KT600 , KT600-160B , KT600-AL , KT602 , KT602A , KT602B ,

site map

webmaste! click here

contact us

Buy Components