http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Vishay Intertechnology Electronic Components Datasheet

SMA0204 Datasheet

Professional Thin Film Leaded Resistors

No Preview Available !

SMA0204 pdf
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
Professional Thin Film Leaded Resistors
DESCRIPTION
MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414
professional leaded thin film resistors are the general
purpose resistor for all fields of professional electronics
where reliability and stability is of major concern. Typical
applications include industrial, telecommunication,
automotive, and medical equipment.
FEATURES
• CECC version (IECQ-CECC approved
according to EN 140101-806)
• Excellent overall stability: class 0.25
• Wide ohmic range: 0.22 Ω to 22 MΩ
• AEC-Q200 qualified available (1)
• Radial version available for MBB/SMA 0207
• Alternative termination wires available for e.g. welding
(MBA/SMA0204 only)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1) AEC-Q200 qualified parts are available per tables “Temperature
Coefficient and Resistance Range”.
APPLICATIONS
• Industrial
• Telecommunication
• Medical equipment
• Automotive
TECHNICAL SPECIFICATIONS
DESCRIPTION
MBA/SMA 0204
MBB/SMA 0207
DIN size
0204
0207
CECC size
AB
Resistance range
0.22 Ω to 10 MΩ; 0 Ω
0.22 Ω to 22 MΩ; 0 Ω
Resistance tolerance
± 5 %; ± 1 %; ± 0.5 %
Temperature coefficient
± 50 ppm/K; ± 25 ppm/K
Rated dissipation, P70 (2)
Operating voltage, Umax. AC/DC
Operating temperature range (2)
0.4 W
200 V
0.6 W
350 V
-55 °C to 155 °C
Peak permissible film temperature (2)
155 °C
155 °C
Insulation voltage:
1 min.; Uins
Continuous
300 V
75 V
500 V
75 V
Failure rate: FITobserved
0.1 x 10-9/h
0.1 x 10-9/h
Notes
• MB_ series has been merged with the related SMA series to form one series “MB_/SMA__”.
(2) Please refer to APPLICATION INFORMATION below.
MBE/SMA 0414
0414
D
0.22 Ω to 22 MΩ
1.0 W
500 V
155 °C
800 V
75 V
0.1 x 10-9/h
Revision: 02-Nov-15
1 Document Number: 28766
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Vishay Intertechnology Electronic Components Datasheet

SMA0204 Datasheet

Professional Thin Film Leaded Resistors

No Preview Available !

SMA0204 pdf
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder
joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
Operation mode
Standard
Climatic category
-55 °C / +125 °C / 56 days
MBA/SMA 0204
0.25 W
Rated dissipation, P70
MBB/SMA 0207
MBE/SMA 0414
0.4 W
0.65 W
Applied maximum film temperature, ϑF max.
MBA/SMA 0204
125 °C
1 Ω to 475 kΩ
1000 h
0.25 %
8000 h
0.5 %
225 000 h
1.5 %
MBB/SMA 0207
1 Ω to 1 MΩ
Max. resistance change at rated
dissipation |ΔR/R max.|, after:
1000 h
8000 h
0.25 %
0.5 %
225 000 h
1.5 %
MBE/SMA 0414
1 Ω to 2.4 MΩ
1000 h
0.2 %
8000 h
0.4 %
225 000 h
1.2 %
Power
-55 °C / +155 °C / 56 days
0.4 W
0.6 W
1.0 W
155 °C
1 Ω to 475 kΩ
0.5 %
1.0 %
1 Ω to 1 MΩ
0.5 %
1.0 %
1 Ω to 2.4 MΩ
0.4 %
0.8 %
Revision: 02-Nov-15
2 Document Number: 28766
For technical questions, contact: filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Part Number SMA0204
Description Professional Thin Film Leaded Resistors
Maker Vishay
Total Page 15 Pages
PDF Download
SMA0204 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 SMA0204 Professional Thin Film Leaded Resistors Vishay
Vishay
SMA0204 pdf
2 SMA0207 Professional Thin Film Leaded Resistors Vishay
Vishay
SMA0207 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components