Datasheet4U Logo Datasheet4U.com

SH69P25 - OTP 4K x 4-Bit Micro-Controller

General Description

SH69P25 is a 4-bit micro controller.

This chip integrates the SH6610C 4-bit CPU core with SRAM, 4K OTPROM, Timer and I/O Ports.

Key Features

  • SH6610C-based single-chip 4-bit micro-controller OTPROM: 4096 X 16 bits RAM: 160 X 4 bits (data memory) Operation voltage: 2.4V - 6.0V (typical 3.0V or 5.0V) 22 CMOS bi-directional I/O pins Built in pull-up and pull-low resistor for PortA ~ PortF 4-level subroutine nesting (including interrupts) One 8-bit auto re-load timer/counter Warm-up timer for power on reset Powerful interrupt sources: - Int.

📥 Download Datasheet

Datasheet Details

Part number SH69P25
Manufacturer Sino Wealth Microelectronic
File Size 259.31 KB
Description OTP 4K x 4-Bit Micro-Controller
Datasheet download datasheet SH69P25 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SH69P20 OTP 4-bit Microcontroller Sino
SH69P20C OTP 1K 4-bit Microcontroller Sino Wealth
SH69P21 OTP 1K 4-bit Microcontroller Sino Wealth
SH69P23 OTP 4-bit Microcontroller SINO
SH69P24 4K LCD & LED Sino Wealth

Other Datasheets by Sino Wealth Microelectronic

Part Number Description
SH69P42 OTP 4-Bit Microcontroller
SH66P20A OTP 4-Bit Microcontroller
SH66P22A OTP 4-Bit Microcontroller
SH67K91 20K 4-Bit Micro Controller
SH67K93 24K 4-Bit Micro Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com SH69P25 PRELIMINARY Features „ „ „ „ „ „ „ „ „ „ SH6610C-based single-chip 4-bit micro-controller OTPROM: 4096 X 16 bits RAM: 160 X 4 bits (data memory) Operation voltage: 2.4V - 6.0V (typical 3.0V or 5.0V) 22 CMOS bi-directional I/O pins Built in pull-up and pull-low resistor for PortA ~ PortF 4-level subroutine nesting (including interrupts) One 8-bit auto re-load timer/counter Warm-up timer for power on reset Powerful interrupt sources: - Internal interrupt (Timer0) - External interrupts: PortB & PortC (rising/falling edge) „ Oscillator (OTP option) - X`tal oscillator: 32.768kHz - 4MHz - Ceramic resonator: 400k - 4MHz - RC oscillator:400k - 4MHz - External clock: 30k - 4MHz „ Instruction cycle time: - 4/32.768kHz(122us) for 32.