http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




  ON Semiconductor Electronic Components Datasheet  

DBD250G Datasheet

25.0A Single-Phase Bridge Rectifier

No Preview Available !

DBD250G pdf
Ordering number : ENA1204A
DBD250G
25.0A Single-Phase Bridge Rectifier
http://onsemi.com
Features
Plastic molded structure
Glass passivation for high reliability
Peak reverse voltage : VRM=600V
Average output current : IO=25.0A
Specifications
Absolute Maximum Ratings at Tc=25°C
Parameter
Peak Reverse Voltage
Symbol
VRM
Average Output Current
IO
Surge Forward Current
Junction Temperature
Storage Temperature
Dilective Strength Voltage
IFSM
Tj
Tstg
VIS
Conditions
Ta=40°C
Ta=40°C, With 3003003.0mm3 Cu fin
50Hz sine wave, 1cycle
Terminals tc case, AC 1 minute
Raitings
600
6.0
25.0
400
150
--40 to +150
2
Unit
V
A
A
A
°C
°C
kV
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Electrical Characteristics at Tc=25°C *Per Constituent element of bridge.
Parameter
Symbol
Conditions
Forward Voltage
Reverse Current
VF
IR
Thremal Resistance
Rth(j-c)
Note) Maximum tightening torque : 0.98Nm
IF=12.5A*
VR:At each VRM*
Junction-Case
Raitings
min typ max
Unit
1.05
V
10 mA
1.5 °C / W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Package Dimensions
unit:mm(typ.)
32.0 MAX
9
7.95
3.4
2.5 MIN
1.5
4.9
14.4
1.65 2.4
10.0
11.0
23.0 MAX
Semiconductor Components Industries, LLC, 2014
April, 2014
42814HK/73008TIIM TA-0858 RB No. A1204-1/2


  ON Semiconductor Electronic Components Datasheet  

DBD250G Datasheet

25.0A Single-Phase Bridge Rectifier

No Preview Available !

DBD250G pdf
DBD250
5 IF -- VF
3
2
10
7
5
3
2
1.0
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4
Forward Voltage, VF -- V
IT13662
32 IO -- Ta
With 3003003mm3 Cu fin
28
With heatsink
24
20
16
12
CRaepsaicstiitvivee, ilnodaudctive load
8 Without heatsink
4
0
0 20 40
RCeaspiasctiivtiev,einlodaudctive load
60 80 100 120
Ambient Temperature, Ta -- °C
140 160
IT13664
400 IFSM -- n
Ta=25°C
350
300
250 50Hz
200
150
100
1.0
23
5 7 10
23
Number of Cycles, n
5 7 100
IT13663
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PSNo. A1204-2/2


Part Number DBD250G
Description 25.0A Single-Phase Bridge Rectifier
Maker ON Semiconductor
Total Page 2 Pages
PDF Download
DBD250G pdf
Download PDF File
DBD250G pdf
View for Mobile






Related Datasheet

1 DBD250G 25.0A Single-Phase Bridge Rectifier ON Semiconductor
ON Semiconductor
DBD250G pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components