Absolute Maximum Ratings (Notes 1,
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (VCC)
Bias Voltage (VBB)
Input Voltage (VIN)
Storage Temperature Range (TSTG)
(Soldering, <10 sec.)
ESD Tolerance, Human Body
0V to 4.5V
−65˚C to +150˚C
Operating Ranges (Note 2)
60V to 85V
7V to 9V
0V to 3.4V
15V to VCC
−20˚C to +100˚C
Do not operate the part without a heat sink.
(See Figure 2 for Test Circuit)
Unless otherwise noted: VCC = 85V, VBB = 8V, CL = 8pF, TC = 50˚C
DC Tests: VIN = 2.35VDC
AC Tests: Output = 40VP-P (35V–75V) at 1MHz
DC Output Voltage
DC Voltage Gain
All Three Channels, No AC Input
Signal, No Output Load
All Three Channels
No AC Input Signal, VIN = 1.10V
No AC Input Signal
(Note 4), No AC Input Signal
(Notes 4, 5), No AC Input Signal
(Note 6), 10% to 90%
(Note 6), 90% to 10%
Min Typical Max
73 78 83
−24 −27 −30
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.
Note 2: Operating ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and
test conditions, see the Electrical Characteristics. Datasheet min/max specification limits are guaranteed by design, test, or statistical analysis. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may change when the device is not operated under the listed test
Note 3: All voltages are measured with respect to GND, unless otherwise specified.
Note 4: Calculated value from Voltage Gain test on each channel.
Note 5: Linearity Error is the variation in dc gain from VIN = 1.1V to VIN = 3.6V.
Note 6: Input from signal generator: tr, tf < 1 ns.
Note 7: Datasheet min/max specification limits are guaranteed by design, test, or statistical analysis.